No CrossRef data available.
Article contents
A DFAM FRAMEWORK FOR THE DESIGN OF COMPLIANT STRUCTURES
Published online by Cambridge University Press: 19 June 2023
Abstract
Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.
Additive manufacturing methods present prospects for designed mechanical deformation via the integration of controlled anisotropic lattice structure forms. Their assimilation into a Design for Additive Manufacturing (DfAM) process would create a novel framework for the design of compliant mechanisms (CM). The method uses lattice structures to replace rigid multi-part mechanisms, with integrated and controlled flexibility into a single, compact, and precise component. In recent years, a lot of research has gone into making algorithms that enable users to generate CMs for their designs. But by relying on algorithms to design solutions, are they neglecting to fully understand how these mechanisms work. This work undertakes the design and development of a novel DfAM Framework, that utilises controlled lattice structure deformations to create a standardised method of CM design. The authors have developed a method for this, whilst allowing users to tailor CMs to their design, by using a wide selection of pretested structures. Indicating suitable structures for their design using an integrated novel taxonomy. The framework is tested and developed using a series of case studies.
Keywords
- Type
- Article
- Information
- Creative Commons
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.- Copyright
- The Author(s), 2023. Published by Cambridge University Press
References
Howell, L. and Midha, A. (1995), “Parametric Deflection Approximations for End-Loaded, Large-Deflection Beams in Compliant Mechanisms”, Journal of Mechanical Design, Vol. 117 No. 1, pp. 156–165, https://dx.doi.org/10.1115/1.2826101CrossRefGoogle Scholar
Loginov, Y., Stepanov, S., Naschetnikova, I. and Muller-Kamskii, G. (2019), “Anisotropy of additively manufactured Ti-6-4 lattice structure”, Mechanics, Resource and Diagnostics of Materials and Structures (MRDMS-2019): Proceedings of the 13th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures, https://dx.doi.org/10.1063/1.5135114.CrossRefGoogle Scholar
Howell, L., Magleby, S. and Olsen, B. (2013), Handbook of compliant mechanisms, John Wiley & Sons, Inc., Chichester, West Sussex, pp. 1–7, https://dx.doi.org/10.1002/9781118516485.ch1CrossRefGoogle Scholar
Hossain, U., Ghouse, S., Nai, K. and Jeffers, J. (2021), “Controlling and testing anisotropy in additively manufactured stochastic structures”, Additive Manufacturing, Vol. 39, p. 101849, https://dx.doi.org/10.1016/j.addma.2021.101849CrossRefGoogle Scholar
Ion, A., Frohnhofen, J., Wall, L., Kovacs, R., Alistar, M., Lindsay, J. and Lopes, P. et al. (2016), “Metamaterial Mechanisms”, Proceedings of the 29th Annual Symposium on User Interface Software and Technology, pp. 529–539, https://dx.doi.org/10.1145/2984511.2984540CrossRefGoogle Scholar
Donohue, S. and Richards, L. (2015), “FIE 2015 special session; Movin' Along: Investigating motion and mechanisms using engineering design activities”, 2015 IEEE Frontiers in Education Conference (FIE), pp. 1–5, https://dx.doi.org/10.1109/FIE.2015.7344024CrossRefGoogle Scholar
“Changing speed - Mechanical devices - Eduqas - GCSE Design and Technology Revision - Eduqas - BBC Bitesize.” (2021), BBC Bitesize, available at: https://www.bbc.co.uk/bitesize/guides/z7gyb82/revision/2 (accessed 12 August 2021).Google Scholar
Air, A. and Woodhouse, A. (2023), “A motion taxonomy of lattice structure deformations for controlled anisotropy within mechanical part designs.” [Manuscript submitted for publication]. Design, Manufacturing & Engineering Management, University of StrathclydeGoogle Scholar
Air, A. and Woodhouse, A. (2022), “Deformation Taxonomy of Additively Manufactured Lattice Structures,” Proceedings of the Design Society. Cambridge University Press, 2, pp. 1361–1370. https://dx.doi.org/10.1017/pds.2022.138.CrossRefGoogle Scholar
Kiener, L., Saudan, H., Cosandier, F. et al. (2021). “Compliant mechanism based on additive manufacturing”. CEAS Space Journal. https://dx.doi.org/10.1007/s12567-021-00394-0CrossRefGoogle Scholar
Danun, A. N., Palma, P. D., Klahn, C., and Meboldt, M. (2020). “Building Block Synthesis of Self-Supported Three-Dimensional Compliant Elements for Metallic Additive Manufacturing.” ASME. https://dx.doi.org/10.1115/1.4048220CrossRefGoogle Scholar
Meisel, N., and Williams, C. (2015). “An Investigation of Key Design for Additive Manufacturing Constraints in Multimaterial Three-Dimensional Printing.” ASME. https://dx.doi.org/10.1115/1.4030991CrossRefGoogle Scholar
Rosen, D.W. (2014), “Research supporting principles for design for additive manufacturing”, Virtual and Physical Prototyping, Vol. 9 No. 4, pp. 225–232. https://dx.doi.org/10.1080/17452759.2014.951530CrossRefGoogle Scholar
Lauff, C.A., Perez, K.B., Camburn, B.A. and Wood, K.L. (2019), “Design Principle Cards: Toolset to Support Innovations With Additive Manufacturing”, Volume 4: 24th Design for Manufacturing and the Life Cycle Conference; 13th International Conference on Micro- and Nanosystems, American Society of Mechanical Engineers, https://dx.doi.org/10.Google Scholar
Perez, K.B., Anderson, D.S., Hölttä-Otto, K. and Wood, K.L. (2015), “Crowdsourced design principles for leveraging the capabilities of additive manufacturing”, Proceedings of the 20th International Conference on Engineering Design (ICED15), The Design Society, Milan, Italy, pp. 1–10.Google Scholar
“DfAM – The Ultimate Guide” (2022), All 3DP, available at https://all3dp.com/1/design-for-additive-manufacturing-dfam-simply-explained/ (accessed 23 September 2022).Google Scholar
Olsen, BM, Issac, Y, Howell, LL, & Magleby, SP. (2010), “Utilizing a Classification Scheme to Facilitate Rigid-Body Replacement for Compliant Mechanism Design.” Proceedings of the ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Volume 2: 34th Annual Mechanisms and Robotics Conference, Parts A and B. Montreal, Quebec, Canada. August 15–18, 2010. pp. 475–489. ASME. https://dx.doi.org/10.1115/DETC2010-28473Google Scholar
“Compliant Mechanisms Explained” (2022), Complaint Mechanisms Research Group, available at: https://www.compliantmechanisms.byu.edu/about-compliant-mechanisms (accessed 18 September 2022).Google Scholar
“Stratasys F170” (2022), Stratasys UK, available at: https://www.sys-uk.com/wp-content/uploads/2020/06/Google Scholar
Ziegler, B., Coppolani, P., Garcia, J.L. (1990), “Dynamic behavior of check valves and safety valves with fluid interaction”, Nuclear Engineering and Design, Volume 124, Issue 3, Pages 391–401, https://dx.doi.org/10.1016/0029-5493(90)90303-F.CrossRefGoogle Scholar
You have
Access
Open access