No CrossRef data available.
Article contents
VIBRATION REDUCTION OF A HAMMER DRILL WITH A TOP-DOWN DESIGN METHOD
Published online by Cambridge University Press: 19 June 2023
Abstract
Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.
Designing vibrating systems is challenging due to component interaction. One approach to reduce the resulting complexity is top-down design where requirements on components are formulated such that the overall system achieves the design goal. Previous work showed how to derive quantitative and solution-neutral requirements on components of a vibrating system, expressed as permissible ranges of impedance. This work adapts the methodology to a practical use case and provides a concrete technical solution: A hammer drill that can cause white finger syndromes to users is equipped with an appropriate vibration absorber. The hammer drill is represented by a lumped mass model and validated using experimental data of a reference design. Solution-neutral and quantitative component requirements on the overall dynamics of the vibration absorber expressed by impedance are derived. They provide a clear target for the component design. A vibration absorber in form of a Tuned Mass Damper (TMD) is designed accordingly. The final design is validated experimentally and shown to reduce the vibration by 47%.
Keywords
- Type
- Article
- Information
- Creative Commons
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.- Copyright
- The Author(s), 2023. Published by Cambridge University Press
References
Bhise, Vivek (2017). Automotive Product Development: A Systems Engineering Implementation. Automotive Product Development: A Systems Engineering Implementation. https://doi.org/10.1201/9781315119502.CrossRefGoogle Scholar
Cherng, John/Ekşioğlu, Mahmut/Kizilaslan, Kemal (2008). Vibration reduction of pneumatic percussive rivet tools: Mechanical and ergonomic re-design approaches. Applied Ergonomics 40, 256–266. https://doi.org/10.1016/j.apergo.2008.04.011.CrossRefGoogle ScholarPubMed
Chetter, I. C./Kent, P. J./Kester, R. C. (1998). The Hand Arm Vibration Syndrome: A Review. Cardiovascular Surgery 6 (1), 1–9. https://doi.org/10.1177/096721099800600101.CrossRefGoogle ScholarPubMed
Cronjäger, L./Jahn, R./Riederer, H. (1984). Entwicklung eines Versuchsstandes zur reproduzierbaren Messung der Vibration schlagender handgeführter Maschinen. Opladen, Westdeutscher Verlag.CrossRefGoogle Scholar
Giannini, Oliviero/Carcaterra, Antonio (2008). Tayolerd damping induced by cluster of resonators. 23rd International Conference on Noise and Vibration Engineering 2008, ISMA 2008 2.Google Scholar
Golycheva, E. V./Babitsky, Vladimir/Veprik, Alex (2003). Dynamic correction of excitation in hand-held electro-pneumatic percussion machines. Journal of Sound and Vibration 259, 829–843. https://doi.org/10.1006/jsvi.2002.5124.CrossRefGoogle Scholar
Golysheva, E.V/Babitsky, Vladimir/Veprik, Alex (2004). Vibration protection for an operator of a hand-held percussion machine. Journal of Sound and Vibration 274, 351–367. https://doi.org/10.1016/j.jsv.2003.05.019.CrossRefGoogle Scholar
Hilti, AG (2022a). Hammer drills that work as hard as you. Available online at https://www.hilti.com.my/content/hilti/A2/MY/en/products/drilling-and-demolition/rotary-hammers/te-3-cl-and-te-3-ml.html#nav/close (accessed 11/23/2022).Google Scholar
Hilti, AG (2022b). Minimize exposure to construction vibration. Available online at https://www.hilti.group/content/hilti/CP/XX/en/company/health-safety-and-environment/products-and-technology/vibration.html (accessed 7/4/2022).Google Scholar
Hwang, Donghyun/Lee, Deuk-Kyu/Jeong, Jaehwa/Lee, Moon (2010). Vibration transmissibility reduction module with flexure mechanism for personal tools. Journal of Mechanical Science and Technology 24, 223–226. https://doi.org/10.1007/s12206-009-1132-7.CrossRefGoogle Scholar
Klerk, Dennis/Rixen, Daniel/Jong, J. (2006). The Frequency Based Substructuring Method reformulated according to the Dual Domain Decomposition Method.Google Scholar
Makita Ltd. (2022). Anti-Vibration Technology (AVT). Available online at https://makitauk.com/anti-vibration-technology (accessed 7/12/2022).Google Scholar
Plagenhoef, Stanley/Evans, F./Abdelnour, Thomas (2013). Anatomical Data for Analyzing Human Motion. Research Quarterly for Exercise and Sport 54, 169–178. https://doi.org/10.1080/02701367.1983.10605290.CrossRefGoogle Scholar
Schäfer, Tobias (2018). Ein gesamtsystemischer Ansatz zur simulationsgestützten Analyse und Optimierung eines Bohrhammerschlagwerkes An overall systemic approach for the simulation-supported analysis and optimization of a striking mechanism of a hammer drill. Karlsruher Institut für Technologie (KIT). https://doi.org/10.5445/IR/1000085321.Google Scholar
VDI-Richtlinie 2057-2. Human exposure to mechanical vibrations Hand-arm vibration, March 2016. Berlin. (accessed 7/7/2022).Google Scholar
Yadav, Ravi Shanker (2012). Improvement in the V-Model. International Journal of Scientific & Engineering Research 3, 1–8.Google Scholar
Yang, Fan/Sedaghati, Ramin/Esmailzadeh, Ebrahim (2021). Vibration suppression of structures using tuned mass damper technology: A state-of-the-art review. Journal of Vibration and Control 28, 107754632098430. https://doi.org/10.1177/1077546320984305.Google Scholar
You have
Access
Open access