Metallurgy is one of the oldest sciences. Its history can be traced back to 6000 BCE with the discovery of Gold, and each new discovery — Copper, Silver, Lead, Tin, Iron and Mercury — marked the beginning of a new era of civilization. Currently there are 86 known metals, but until the end of the 17th century, only 12 of these were known. Steel (Fe–C alloy) was discovered in the 11th century BCE; however, it took until 1709 CE before we mastered the smelting of pig-iron by using coke instead of charcoal and started the industrial revolution. The metallurgy of nowadays is mainly about discovering better materials with superior properties to fulfil the increasing demand of the global market. Promising are the Glassy Metals or Bulk Metallic Glasses (BMGs) — discovered at first in the late 50s at the California Institute of Technology — which are several times stronger than the best industrial steels and 10-times springier. The unusual structure that lacks crystalline grains makes BMGs so promising. They have a liquid-like structure that means they melt at lower temperatures, can be moulded nearly as easily as plastics, and can be shaped into features just 10 nm across. The best BMG formers are based on Zr, Pd, Pt, Ca, Au and, recently discovered, also Fe. They have typically three to five components with large atomic size mismatch and a composition close to a deep eutectic. Packing in such liquids is very dense, with a low content of free volume, resulting in viscosities that are several orders of magnitude higher than in pure metal melts.

It is well known that thermally pulsing Asymptotic Giant Branch stars with low mass play a relevant role in the chemical evolution. They have synthesized about 30% of the galactic carbon and provide an important contribution to the nucleosynthesis of heavy elements (A > 80). The relevant nucleosynthesis site is the He-rich intermediate zone (less than 10−2 M⊙), where α(2α,γ)12C reactions and slow neutron captures on seed nuclei (essentially iron) take place. A key ingredient is the interplay between nuclear processes and convective mixing. It is the partial overlap of internal and external convective zones that allows the dredge-up of the material enriched in C and heavy elements. We review the progresses made in the last 50 years in the comprehension of the s process in AGB stars, with special attention to the identification of the main neutron sources and to the particular physical conditions allowing this important nucleosynthesis.

In this paper we present the evolution of a low-mass model (initial mass M = 1.5 M⊙) with a very low metal content (Z = 5 × 10−5, equivalent to [Fe/H] = –2.44). We find that, at the beginning of the Asymptotic Giant Branch (AGB) phase, protons are ingested from the envelope in the underlying convective shell generated by the first fully developed thermal pulse. This peculiar phase is followed by a deep third dredge-up episode, which carries to the surface the freshly synthesized 13C, 14N and 7Li. A standard thermally pulsing AGB (TP-AGB) evolution then follows. During the proton-ingestion phase, a very high neutron density is attained and the s process is efficiently activated. We therefore adopt a nuclear network of about 700 isotopes, linked by more than 1200 reactions, and we couple it with the physical evolution of the model. We discuss in detail the evolution of the surface chemical composition, starting from the proton ingestion up to the end of the TP-AGB phase.

We evolve extremely metal-poor ([Fe/H]≃–3), thermally pulsing Asymptotic Giant Branch (AGB) models with the mass range of 1–8 M⊙. The chemical yields ejected from the models are obtained by considering mass loss. We find that the 1- and 2-M⊙ AGB models are not affected by hot bottom burning (HBB). Nevertheless, they produce large amount of 7Li in an H-flash event. The occurrence of this event is associated with the ingestion of protons from the overlying H-rich envelope into the He convective shell driven by thermal pulse. The resulting 7Li abundances in the ejecta are higher than the primordial one predicted in Big-Bang nucleosynthesis. The efficient production of 7Li by the operation of HBB is also confirmed in the models of 4–8 M⊙. If these AGB stars have a low-mass companion, it is probable that mass loss from the primary AGB star brings the materials enriched in 7Li into the secondary star. This makes the surface composition of the secondary Li-rich. The formation of Li-rich stars, however, is strongly dependent on the mass loss history and binary separation. The nucleosynthesis for the other light nuclei is also calculated up to the end of the AGB phase. We find that the abundance patterns of the metal-poor stars CS 29528–041 and CS 29497–030 are well reproduced by yields from our AGB models.

We follow the chemical evolution of the Galaxy for the s elements using a Galactic chemical evolution (GCE) model, as already discussed by Travaglio et al. (1999, 2001, 2004), with a full updated network and refined asymptotic giant branch (AGB) models. Calculations of the s contribution to each isotope at the epoch of the formation of the solar system is determined by following the GCE contribution by AGB stars only. Then, using the r-process residual method we determine for each isotope their solar system r-process fraction, and recalculate the GCE contribution of heavy elements accounting for both the s and r process. We compare our results with spectroscopic abundances at various metallicities of [Sr,Y,Zr/Fe], of [Ba,La/Fe], of [Pb/Fe], typical of the three s-process peaks, as well as of [Eu/Fe], which in turn is a typical r-process element. Analysis of the various uncertainties involved in these calculations are discussed.

We present computations of nucleosynthesis in red giants and Asymptotic Giant Branch (AGB) stars of Population I experiencing extended mixing. The assumed physical cause for mass transport is the buoyancy of magnetized structures, according to recent suggestions. The peculiar property of such a mechanism is to allow for both fast and slow mixing phenomena, as required for reproducing the spread in Li abundances displayed by red giants and as discussed in an accompanying paper. We explore here the effects of this kind of mass transport on CNO and intermediate-mass nuclei and compare the results with the available evidence from evolved red giants and from the isotopic composition of presolar grains of AGB origin. It is found that a good general accord exists between predictions and measurements; in this framework we also show which type of observational data best constrains the various parameters. We conclude that magnetic buoyancy, allowing for mixing at rather different speeds, can be an interesting scenario to explore for explaining together the abundances of CNO nuclei and of Li.

We present an analysis of Li abundances in low mass stars (LMS) during the Red Giant Branch (RGB) and Asymptotic Giant Branch (AGB) stages, based on a new determination of their luminosities and evolutionary status. By applying recently suggested models for extra-mixing, induced by magnetic buoyancy, we show that both Li-rich and Li-poor stars can be accounted for. The simplest scenario implies the development of fast instabilities on the RGB, where Li is produced. When the fields increase in strength, buoyancy slows down and Li is destroyed. 3He is consumed, at variable rates. The process continues on the AGB, where however moderate mass circulation rates have little effect on Li due to the short time available. O-rich and C-rich stars show different histories of Li production/destruction, possibly indicative of different masses. More complex transport schemes are allowed by magnetic buoyancy, with larger effects on Li, but most normal LMS seem to show only the range of Li variation discussed here.

Barium stars are extrinsic Asymptotic Giant Branch (AGB) stars. They present the s-enhancement characteristic for AGB and post-AGB stars, but are in an earlier evolutionary stage (main sequence dwarfs, subgiants, red giants). They are believed to form in binary systems, where a more massive companion evolved faster, produced the s-elements during its AGB phase, polluted the present barium star through stellar winds and became a white dwarf. The samples of barium stars of Allen & Barbuy (2006) and of Smiljanic et al. (2007) are analysed here. Spectra of both samples were obtained at high-resolution and high S/N. We compare these observations with AGB nucleosynthesis models using different initial masses and a spread of 13C-pocket efficiencies. Once a consistent solution is found for the whole elemental distribution of abundances, a proper dilution factor is applied. This dilution is explained by the fact that the s-rich material transferred from the AGB to the nowadays observed stars is mixed with the envelope of the accretor. We also analyse the mass transfer process, and obtain the wind velocity for giants and subgiants with known orbital period. We find evidence that thermohaline mixing is acting inside main sequence dwarfs and we present a method for estimating its depth.

Models of average Galactic chemical abundances are in good general agreement with observations for [Fe/H] > –1.5, but there are gross discrepancies at lower metallicities. Only massive stars contribute to the chemical evolution of the ‘juvenile universe’ corresponding to [Fe/H] ≲ –1.5. If Type II supernovae (SNe II) are the only relevant sources, then the abundances in the interstellar medium of the juvenile epoch are simply the sum of different SN II contributions. Both low-mass (∼8–11 M⊙) and normal (∼12–25 M⊙) SNe II produce neutron stars, which have intense neutrino-driven winds in their nascent stages. These winds produce elements such as Sr, Y and Zr through charged-particle reactions (CPR). Such elements are often called the ‘light r-process elements’, but are considered here as products of CPR and not the r process. The observed absence of production of the low-A elements (Na through Zn including Fe) when the true r-process elements (Ba and above) are produced requires that only low-mass SNe II be the site if the r process occurs in SNe II. Normal SNe II produce the CPR elements in addition to the low-A elements. This results in a two-component model that is quantitatively successful in explaining the abundances of all elements relative to hydrogen for –3 ≲ [Fe/H] ≲ –1.5. This model explicitly predicts that [Sr/Fe] ≥ –0.32. Recent observations show that there are stars with [Sr/Fe] ≲ –2 and [Fe/H] < –3. This proves that the two-component model is not correct and that a third component is necessary to explain the observations. The production of CPR elements associated with the formation of neutron stars requires that the third component must be massive stars ending as black holes. It is concluded that stars of ∼25–50 M⊙ (possibly up to ∼100 M⊙) are the appropriate candidates. These produce hypernovae (HNe) that have very high Fe yields and are observed today. Stars of ∼140–260 M⊙ are completely disrupted upon explosion. However, they produce an abundance pattern greatly deficient in elements of odd atomic numbers, which is not observed, and therefore they are not considered as a source here. Using a Salpeter initial mass function, it is shown that HNe are a source of Fe that far outweighs normal SNe II, with the former and the latter contributing ∼24% and ∼9% of the solar Fe abundance, respectively. It follows that the usual assignment of ∼⅓ of the solar Fe abundance to normal SNe II is not correct. This leads to a simple three-component model including low-mass and normal SNe II and HNe, which gives a good description of essentially all the data for stars with [Fe/H] ≲ –1.5. We conclude that HNe are more important than normal SNe II in the chemical evolution of the low-A elements from Na through Zn (including Fe), in sharp distinction to earlier models.

We have performed large-scale nucleosynthesis calculations within the high-entropy-wind (HEW) scenario of Type II supernovae. The primary aim was to constrain the conditions for the production of the classical ‘p-only’ isotopes of the light trans-Fe elements. We find, however, that for electron fractions in the range 0.458 ≤ Y e ≤ 0.478, sizeable abundances of p-, s- and r-process nuclei between 64Zn and 98Ru are coproduced in the HEW at low entropies (S ≤ 100) by a primary charged-particle process after an α-rich freezeout. With the above Y e–S correlation, most of the predicted isotopic abundance ratios within a given element, e.g. 64Zn(p)/70Zn(r) or 92Mo(p)/94Mo(p), as well as of neighboring elements, e.g. 70Ge(s + p)/74Se(p) or 74Se(p)/78Kr(p) agree with the observed Solar-System ratios. Taking the Mo isotopic chain as a particularly challenging example, we show that our HEW model can account for the production of all 7 stable isotopes, from ‘p-only’ 92Mo, via ‘s-only’ 96Mo up to ‘r-only’ 100Mo. Furthermore, our model is able to reproduce the isotopic composition of Mo in presolar SiC X-grains.

We revisit the problem of why stars become red giants. We modify the physics of a standard stellar evolution code in order to determine what does and what does not contribute to a star becoming a red giant. In particular, we have run tests to try to separate the effects of changes in the mean molecular weight and in the energy generation. The implications for why stars become red giants are discussed. We find that while a change in the mean molecular weight is necessary (but not sufficient) for a 1-M⊙ star to become a red giant, this is not the case in a star of 5 M⊙. It therefore seems that there may be more than one way to make a giant.

The time scales in the s process appears to be an approriate aspect to discuss at the occasion of Roberto's 70th anniversary, the more as this subject has been repeatedly addressed during the 20 years of collaboration between Torino and Karlsruhe. The two chronometers presented in this text were selected to illustrate the intense mutual stimulation of both groups. Based on a reliable set of accurate stellar (n, γ) cross sections determined mostly at FZK, the Torino group succeeded to develop a comprehensive picture of the various s-process scenarios, which are most valuable for understanding the composition of the solar system as well as for the interpretation of an increasing number of astronomical observations.

We present montage, a post-processing nucleosynthesis code that combines a traditional network for isotopes lighter than calcium with a rapid algorithm for calculating the s-process nucleosynthesis of the heavier isotopes. The separation of those parts of the network where only neutron-capture and beta-decay reactions are significant provides a substantial advantage in computational efficiency. We present the yields for a complete set of s-process isotopes for a 3-M⊙, Z = 0.02 stellar model, as a demonstration of the utility of the approach. Future work will include a large grid of models suitable for use in calculations of Galactic chemical evolution.

A method to shape the neutron energy spectrum at low-energy accelerators is proposed by modification of the initial proton energy distribution. A first application to the superconductive RFQ of the SPES project at Laboratori Nazionali di Legnaro is investigated for the production of a Maxwell–Boltzmann neutron spectrum at kT = 30 keV via the 7Li(p, n)7Be reaction. Concept, solutions and calculations for a setup consisting of a proton energy shaper and a lithium target are presented. It is found that a power dentisity of 3 kW cm−2 could be sustained by the lithium target and a forward-directed neutron flux higher than 1010 s−1 at the sample position could be obtained. In the framework of the SPES project the construction of a LEgnaro NeutrOn Source (LENOS) for Astrophysics and for validation of integral nuclear data is proposed, suited for activation studies on stable and unstable isotopes.

With modern techniques, neutron-capture cross sections can be determined with uncertainties of a few percent. However, Maxwellian averaged cross sections calculated from such data require a correction (because low-lying excited states are thermally populated in the hot stellar photon bath) which has to be determined by theoretical calculations. These calculations can be improved with information from indirect measurements, in particular by the inelastic scattering cross section. For low-lying levels, the inelastically scattered neutrons are difficult to separate from the dominant elastic channel. This problem is best solved by means of pulsed, monoenergetic neutron beams. For this reason, a pulsed beam of 30 keV neutrons with an energy spread of 7 to 9 keV FWHM and a width from 10 to 15 ns has been produced at Forschungszentrum Karlsruhe using the 7Li(p, n)7Be reaction directly at the reaction threshold. With this neutron beam the inelastic scattering cross section of the first excited level at 9.75 keV in 187Os was determined with a relative uncertainty of 6%. The use of monoenergetic neutron beams has been further pursued at the Physikalisch-Technische Bundesanstalt in Braunschweig, including the 3H(p, n)3He reaction for producing neutrons with an energy of 64 keV.

The 18O(p, α)15N reaction rate has been extracted by means of the Trojan-Horse method. For the first time the contribution of the 20-keV peak has been directly evaluated, giving a value about 35% larger than previously estimated. The present approach has allowed to improve the accuracy of a factor 8.5, as it is based on the measured strength instead of educated guesses or spectroscopic measurements. The contribution of the 90-keV resonance has been determined as well, which turned out to be of negligible importance to astrophysics.

In past decades a lot of progress has been made towards understanding the main s-process component that takes place in thermally pulsing Asymptotic Giant Branch (AGB) stars. During this process about half of the heavy elements, mainly between 90 ≤ A ≤ 209 are synthesized. Improvements were made in stellar modeling as well as in measuring relevant nuclear data for a better description of the main s process. The weak s process, which contributes to the production of lighter nuclei in the mass range 56 ≤ A ≤ 90 operates in massive stars (M ≥ 8 M⊙) and is much less understood. A better characterization of the weak s component would help disentangle the various contributions to element production in this region. For this purpose, a series of measurements of neutron-capture cross sections have been performed on medium-mass nuclei at the 3.7-MV Van de Graaff accelerator at FZK using the activation method. Also, neutron captures on abundant light elements with A < 56 play an important role for s-process nucleosynthesis, since they act as neutron poisons and affect the stellar neutron balance. New results are presented for the (n, γ) cross sections of 41K and 45Sc, and revisions are reported for a number of cross sections based on improved spectroscopic information.

The neutron-capture cross sections of 186,187Os have been recently measured at the CERN neutron time-of-flight facility n_TOF for an improved evaluation of the Re/Os cosmo-chronometer. This experimental information was complemented by nuclear model calculations for obtaining the proper astrophysical reaction rates at s-process temperatures. The calculated results and their implications for the determination of the time-duration of nucleosynthesis during galactic chemical evolution is discussed.

The ‘Frankfurter Neutronenquelle am Stern–Gerlach–Zentrum’ (FRANZ), which is currently under development, will be the strongest neutron source in the astrophysically interesting energy region in the world. It will be about three orders of magnitude more intense than the well-established neutron source at the Research Center Karlsruhe (FZK).