Hostname: page-component-54dcc4c588-b5cpw Total loading time: 0 Render date: 2025-09-26T07:08:18.078Z Has data issue: false hasContentIssue false
  • English
  • Français

Association of electromagnetic methods to model printed circuit board in power electronic systems

Published online by Cambridge University Press:  06 May 2003

A. Guena ,
F. Costa  and
C. Labarre
A. Guena
Affiliation:
SATIE UMR 8029, ENS Cachan, 61 avenue du Président Wilson, 94230 Cachan, France
F. Costa*
Affiliation:
SATIE UMR 8029, ENS Cachan, 61 avenue du Président Wilson, 94230 Cachan, France
C. Labarre
Affiliation:
Dépt. Métrologie Qualité, École des Mines de Douai, 941 rue Charles Bourseul, BP 838, 59508 Douai Cedex, France
*
francois.costa@lesir.ens-cachan.fr
Get access

Abstract

The aim of this paper is to model the printed connections in static power converters. An analytical technique, based on the transmission line theory has been proposed previously (Labarre et al., Eur. Phys. J. AP 3, 169 (1998)). This papershows that this modeling technique, named the thin wire method (TWM) is well adapted topredict the behaviour of various configuration of printed circuit board with a ground plane:isolated microstrip lines exhibiting a constant or not width, parallel or non-parallel linesof any length. New analytical formulas are proposed in any layout configuration. However,the total circuit modeling needs to combine the features of different electromagneticmodels: MTL, PEEC, CTL with a numerical technique: the two dimensional transmission linematrix method (TLM2D).

Keywords

Information

Type
Research Article
Information
The European Physical Journal - Applied Physics , Volume 22 , Issue 2 , May 2003 , pp. 115 - 132
Copyright
© EDP Sciences, 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

T. Edwards, Foundation for microstrip circuit design (J. Wiley & Sons, 1992)
C. Gautier, Contribution au développement d'outils logiciels en vue de la conception des convertisseurs statiques intégrant la compatibilité électromagnétique, Janvier 2000, Thèse de doctorat de 3e cycle de l'Université de Paris VI
F.W. Grover, Inductance calculations, working formulas and tables (Dover Edition, New-York, 1962)
A. Guena, Association of electromagnetic methods in power electronics, Thèse de doctorat École Normale Supérieure de Cachan, Décembre 2001
A. Guena, F. Costa, C. Labarre, C. Gautier, New developments of analytical and numerical techniques to model in power electronic systems, 13th conference on the Computation of Electromagnetic Field, July 2001, Lyon-Evian, tome 2, pp. 120-121
K.C. Gupta, R. Garg, I. Bahl, P. Bhartia, Microstrip lines and slotlines, 2nd. edn. (Norwood, MA: Artech House, 1996)
Hill, D.A., Cavcey, K.H., Johnk, R.T., IEEE Trans. EMC 36, 314 (1994)
Hoefer, W.J.R., IEEE MTT 33, 882 (1985) CrossRef
Johns, P.B., Beurle, R.L., Proc. IEE 118, 1203 (1971)
Kami, Y., Sato, R., IEEE Trans. EMC 28, 204 (1986)
Labarre, C., Petit, P., Costa, F., Gautier, C., Eur. Phys. J. AP 3, 169 (1998) CrossRef
C.R. Paul, Introduction to electromagnetic compatibility (Wiley Interscience, John Wiley & Sons, 1992)
P. Petit, Contribution à la modélisation du câblage utilisé en électronique de puissance par la médthode des Fils Fins, Thèse du Conservatoire Nationale des Arts et Métiers, Décembre 1996
S. Ramo, J.R. Whinnery, T. Van Duzer, Fields and Waves in Communications Electronics (John Wiley & Sons, 1994)
Ruehli, A.E., I.B.M. J. Res. Dev. 16, 470 (1972)
Tkatchenko, S., Rachidi, F., Ianoz, M., IEEE Trans. EMC 37, 509 (1995)