Hostname: page-component-8448b6f56d-cfpbc Total loading time: 0 Render date: 2024-04-18T12:24:31.349Z Has data issue: false hasContentIssue false

Deposition and characterization of highly energetic Al/MoOx multilayer nano-films

Published online by Cambridge University Press:  09 December 2013

Shuai Fu
Affiliation:
School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, P.R. China
Ying Zhu
Affiliation:
School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, P.R. China
Dongle Li
Affiliation:
School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, P.R. China
Peng Zhu*
Affiliation:
School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, P.R. China
Bo Hu
Affiliation:
School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, P.R. China
Yinghua Ye
Affiliation:
School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, P.R. China
Ruiqi Shen
Affiliation:
School of Chemical Engineering, Nanjing University of Science and Technology, Nanjing 210094, P.R. China
*
Get access

Abstract

Al/MoOx nanoenergetic multilayer films (nEMFs) were deposited by magnetron deposition method. The samples with bilayer thicknesses of 75 nm and 225 nm were prepared, respectively, and the total thickness is 3 μm. The as-deposited Al/MoOx nEMFs were characterized with varied analytical techniques, including SEM, XRD, XPS and DSC. Results show that the MoOx films are amorphous, and are composed of MoO3, Mo2O5 and MoO2. The values of heat release in samples are 3524 J/g and 2508 J/g, respectively, and the final products are Mo, MoO2, and Al2O3. Finally, the reaction paths and reaction kinetics of Al/MoOx exothermic reactions were discussed.

Type
Research Article
Copyright
© EDP Sciences, 2013

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Rossi, C. et al., J. Microelectromech. Syst. 16, 919 (2007)CrossRef
Rogachev, A.S., Russ. Chem. Rev. 77, 21 (2008)CrossRef
Rogachev, A.S., Mukasyan, A.S., Combust. Explo. Shock. 46, 243 (2010)CrossRef
Dreizin, E.L., Prog. Energy Combust. Sci. 35, 141 (2009)CrossRef
Zhang, K., Rossi, C., Petrantoni, M., J. Microelectromech. Syst. 17, 832 (2008)CrossRef
Manesh, N.A., Basu, S., Kumar, R., J. Combust. Flame. 157, 476 (2010)CrossRef
Manesh, N.A., Basu, S., Kumar, R., Energy 36, 1688 (2011)CrossRef
Zhu, P. et al., J. Appl. Phys. 110, 074513 (2011)CrossRef
Zhou, X. et al., J. Appl. Phys. 110, 094505 (2011)CrossRef
Zhu, P. et al., J. Appl. Phys. 109, 084523 (2011)CrossRef
Zhang, K., Yang, Y., Shen, R., Nanotechnology 21, 235602 (2010)CrossRef
Fischer, S.H., Grubelich, M.C., Theoretical energy release of thermites, intermetallics, combustible metals, in 24th Int. Pyrotechnics Seminar, CA, Monterey, 1998Google Scholar
Fan, X. et al., J. Phys. D: Appl. Phys. 44, 045101 (2011)CrossRef
Tripathi, V., Nazrul Islam, M., Mohapatra, Y.N., Eur. Phys. J. Appl. Phys. 39, 203 (2007)CrossRef
Peng, Z. et al., Synth. React. Inorg. M. 38, 318 (2008)
Swiatowska-Mrowiecka, J., de Diesbach, S., Maurice, V., J. Phys. Chem. 112, 11050 (2008)
Itoh, T., Matsubara, I., Shin, W., J. Ceram. Soc. 118, 171 (2010)CrossRef
Zhang, K., Rossi, C., Ardila Rodriguez, G.A., J. Appl. Phys. Lett. 91, 113 (2007)
Umbrajkar, S.M., Schoenitz, M., Dreizin, E.L., Thermochim. Acta. 451, 34 (2006)CrossRef