Hostname: page-component-cb9f654ff-5jtmz Total loading time: 0 Render date: 2025-08-30T20:49:14.965Z Has data issue: false hasContentIssue false
  • English
  • Français

Subproblem approach for modeling multiply connected thin regions with an h-conformal magnetodynamic finite element formulation*

Published online by Cambridge University Press:  08 November 2013

Vuong Quoc Dang ,
Patrick Dular ,
Ruth V. Sabariego ,
Laurent Krähenbühl  and
Christophe Geuzaine
Vuong Quoc Dang*
Affiliation:
University of Liège, Department of Electrical Engineering and Computer Science, ACE, 4000 Liege, Belgium
Patrick Dular
Affiliation:
University of Liège, Department of Electrical Engineering and Computer Science, ACE, 4000 Liege, Belgium Fonds de la Recherche Scientifique - F.R.S.-FNRS, 1000 Brussels, Belgium
Ruth V. Sabariego
Affiliation:
University of Liège, Department of Electrical Engineering and Computer Science, ACE, 4000 Liege, Belgium
Laurent Krähenbühl
Affiliation:
University of Lyon, Ampere (CNRS UMR5005), École Centrale de Lyon, 69134 Écully Cedex, France
Christophe Geuzaine
Affiliation:
University of Liège, Department of Electrical Engineering and Computer Science, ACE, 4000 Liege, Belgium
*
ae-mail: quocvuong.dang@ulg.ac.be
Get access

Abstract

A subproblem h-conformal eddy current finite element method is proposed for correcting the inaccuracies inherent to thin shell models. Such models replace volume thin regions by surfaces but neglect border effects in the vicinity of their edges and corners. The developed surface-to-volume correction problem is defined as a step of the multiple subproblems that can split a complete problem, consisting of inductors and magnetic or conducting regions, some of these being thin regions. The general case of multiply connected thin regions is considered.

Information

Type
Research Article
Information
The European Physical Journal - Applied Physics , Volume 64 , Issue 2 , November 2013 , 24516
Copyright
© EDP Sciences, 2013

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

Footnotes

*

Contribution to the Topical Issue “Numelec 2012”, Edited by Adel Razek.

References

Krähenbühl, L., Muller, D., IEEE Trans. Magn. 29, 1450 (1993)CrossRef
Geuzaine, C., Dular, P., Legros, W., IEEE Trans. Magn. 36, 799 (2000)CrossRef
Guérin, C., Meunier, G., IEEE Trans. Magn. 48, 323 (2012)CrossRef
Dang, V.Q., Dular, P., Sabariego, R.V., Krähenbühl, L., Geuzaine, C., IEEE Trans. Magn. 48, 407 (2012)CrossRef
Le-Duc, T., Meunier, G., Chadebec, O., Guichon, J.-M., IEEE Trans. Magn. 48, 427 (2012)CrossRef
Dular, P., Sabariego, R.V., IEEE Trans. Magn. 43, 1293 (2007)CrossRef
Bossavit, A., IEE Proc. A Sci. Meas. Technol. UK 135, 179 (1988)
Rodger, D., Atkinson, N., IEEE Trans. Magn. 23, 3047 (1987)CrossRef
Tuan, P.A., Chadebec, O., Labie, P., Floch, Y.L., Meunier, G., IEEE Trans. Magn. 41, 1668 (2005)
Dular, P., Legros, W., IEEE Trans. Magn. 34, 3078 (1998)CrossRef
Geuzaine, C., Meys, B., Henrotte, F., Dular, P., Legros, W., IEEE Trans. Magn. 35, 1438 (1999)CrossRef
Dular, P., Hody, J.Y., Nicolet, A., Gennon, A., Legros, W., IEEE Trans. Magn. 30, 2980 (1994)CrossRef