Hostname: page-component-6b989bf9dc-vmcqm Total loading time: 0 Render date: 2024-04-15T02:57:28.982Z Has data issue: false hasContentIssue false
  • English
  • Français

Alkali Activated Cementitious Materials: An Overview

Published online by Cambridge University Press:  15 February 2011

D. M. Roy  and
M. R. Silsbee
D. M. Roy
Affiliation:
The Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16801
M. R. Silsbee
Affiliation:
The Materials Research Laboratory, The Pennsylvania State University, University Park, PA 16801
Get access

Abstract

Alkali-activated cementitious materials have considerable potential, with properties ranging from very high early strength to very high long term strength and low porosity. The role of alkalis in activating industrial by-products such as ground granulated (glassy) blast-furnace slag, ultra-fine silica fume or other by-product silicas, glassy fly ashes, and other amorphous materials is discussed. These by-product materials are activated by alkali additions which break the strong silicon oxygen bonds in the silicate or alumino-silicate network, accompanied by the formation of new reaction products. The role of the different components in multi-component activated cements on the reactivity and the nature of the resultant products is discussed. Characterization of starting materials and reaction products by XRD, SEM (including environmental SEM), chemical, and particle characterization techniques has been made. Additional results include investigation of pore solution chemistry as a function of time. Some inferences for long term durability are discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 245: Symposium K – Advanced Cementitious Systems: Mechanisms and Properties , 1991 , 153
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1) Glukovoski, V. D., “Alkali-Earth Binders and Concretes Produced with Them,” (Visheka Shkola, Kiev, USSR) 1979 232pp (Russian).Google Scholar
2) Forss, B., “Experiences From the Use of F-Cement – A Binder Based on Alkali-Activated Blastfurnace Slag,” in Alkalis in Concrete, 101–104 Copenhagen, Denmark (1983).Google Scholar
3) Talling, B., Brandstcettr, J., "Present State and Future of Alkali-Activated Slag Concretes," in Fly Ash, Silica Fume, Slag, and Natural Pozzlons in Concrete" Vol.2, Proceedings Third International Conference, Trondheim, Norway, ACI, (1989).Google Scholar
4) Roy, D. M. and Silsbee, M.R., "New Rapid Setting Alkali Activated Cement Compositions," in Specialty Cements With Advanced Properties (The Materials Research Society) vol.179, 203–218 (1991), Ed., Scheetz, B.E., et. al..Google Scholar
5) Heitsmann, R. F., Fitzgerald, M. and Sawyer, J. L., U.S. Patent No. 4,642,137 Feb. 10, 1987.Google Scholar
6) Davidovits, J., Concr. Intern. 23–35 (1987).Google Scholar
7) Roy, D. M., “Advances in Cements/Chemically Bonded Ceramics,” Ceramics Towards the 21st Century, Centennial Int. Symp., Cer. Soc. Japan, Tokyo 1991, 535–551.Google Scholar
8) Xuequan, W., Weimin, J. and Roy, D. M., “Early Activation of Slag Cement,” Cem. Concr. Res. 20 961–974 (1990).Google Scholar
9) Silsbee, M. R., Wolfe-Confer, D. and Roy, D.M., “Fiber Reinforced Alkali Activated Blended Cement Materials,” Mat. Res. Soc. Svmp. Proc., Vol.211 pp. 231–238 (1991).10.1557/PROC-211-231Google Scholar
10) Glasser, F. P., Luke, K. and Angus, M.J., "Modification of cement Pore Fluid Composition by Pozzolanic Additives," Cem. Concr. Res. 188 [2] 165–178 (1988).10.1016/0008-8846(88)90001-4Google Scholar
11) Wei, F., Grutzeck, M. W. and Roy, D. M., “Leaching of Warm-Pressed CsZP-Cement Composite Waste Forms,” Mat. Res. Soc. Symp. Proc., Vol.44, 899–902 (1985).Google Scholar
12) Roy, D. M., "Cementitious Materials in Nuclear Waste Management," Cements Research Progress 1988, 261–292, American Ceramic Society (1990).Google Scholar
13) Thompson, J., Silsbee, M. R. and Scheetz, B. E., (in progress)Google Scholar