Hostname: page-component-77f85d65b8-8v9h9 Total loading time: 0 Render date: 2026-04-14T07:27:50.625Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation of YSZ Thin Film on Porous Electrode of SOFC

Published online by Cambridge University Press:  16 February 2011

H. Nagamoto  and
H. Ikewaki
H. Nagamoto
Affiliation:
Department of Environmental Chemical Engineering, Kogakuin University, 1-24-2 Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-8677, Japan nagamoto@cc.kogakuin.ac.jp
H. Ikewaki
Affiliation:
Department of Environmental Chemical Engineering, Kogakuin University, 1-24-2 Nishi-Shinjuku, Shinjuku-ku, Tokyo 163-8677, Japan nagamoto@cc.kogakuin.ac.jp
Get access

Abstract

Porous electrode substrate of La0.7Sr0.2MnO3 was used as the support for the deposition of YSZ thin films. The porosity of the electrode substrate was controlled by sintering temperature and particle size of powders. Thin films of YSZ were fabricated on the electrode by sol-gel method. The YSZ film fabricated by 10-fold coating with 0.05M YSZ sol containing TEA was continuous and crack-free one of 5 mm in thickness. However, hydrogen permeation measurement showed that there was a very small leakage of hydrogen in the fabricated film. In addition to sol-gel method, another technique such as EVD should be employed to make the film completely gas-tight.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 547: Symposium DD – Solid-State Chemistry of Inorganic Materials II , 1998 , 333
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Nagamoto, H., Kumagai, K., and Murayama, H. in Electrically Based Microstructural Characterization, edited by Gerhardt, R.A., Taylor, S.R., and Garboczi, E.J. (Mater. Res. Soc. Proc. 411, Pittsburgh, PA 1996) 255–260.Google Scholar
2. Shibuya, Y. and Nagamoto, H., Proceedings of 5th International Symposium on SOFCs , edited by Stimming, U. et al. , pp. 510–519, The Electrochem. Soc., Pennington, NJ (1997).Google Scholar
3. Shimada, W. and Nagamoto, H., Proceedings of New Materials for Fuel Cell and Modern Battery Systems II, edited by Savadogo, O., pp. 783–790 (1997).Google Scholar
4. Mogensen, M., Lindegaard, T., Hansen, U.R., and Mogensen, G., Proceedings of 2nd International Symposium on Ionic and Mixed Conducting Ceramics , edited by Ramanarayanan, T.A. et al. , pp. 448–465, The Electrochem. Soc., Pennington, NJ (1994).Google Scholar
5. Takahashi, T. and Ishihara, H., Energy Conversion, 11, 105 (1971).Google Scholar
6. Isenberg, A.O., ECS Symposium Electrode Materials, Processes for Energy Conversion and Storage, Vol. 77-6, 572 (1977).Google Scholar
7. Carolan, M.F. and Michaels, J.N., Solid State Ionics, 37, 189 (1990).Google Scholar
8. Schoonman, J., Dekker, J.P., Broers, J.W., and Kiwiet, N.J., Solid State Ionics, 46, 299 (1991).Google Scholar
9. Okada, T., Hamatani, H., and Yoshida, T., J. Am. Ceram. Soc., 72, 2053 (1989).Google Scholar
10. Ishihara, T., Kudo, T., Matsuda, H., Mizuhara, Y., and Takita, Y., Proceedings of 2nd International Symposium on SOFCs , edited by Singhal, S.C. and Iwahara, H., pp. 510–519, The Electrochem. Soc., Pennington, NJ (1993).Google Scholar