No CrossRef data available.
Article contents
Influence of solid–liquid compositions and contact time during maturation on the properties of artificial peloids for use in pelotherapy
Published online by Cambridge University Press: 10 July 2025
Abstract
Peloids are natural therapeutic muds or clays used in balneotherapy and other health treatments. The aim of this study is to prepare and qualify three artificial peloids by maturation for 360 days of some Tunisian smectitic clays with a naturally chlorinated sodic mineral water from a spring in Korbous, Tunisia. This was done to improve our understanding of the behaviour of these clays and the physicochemical changes that affect the clays during maturation, with the purpose of providing suitable raw materials as a solid phase for peloid preparation. The results showed that parameters such as mineralogy, geochemistry, granulometry, cation-exchange capacity, consistency parameters (Atterberg limits and plasticity index), specific surface area, cooling kinetics and pH are all affected by the geochemistry of the thermal water used during maturation. Mineralogical modifications mostly concern the clay minerals’ contents, particularly smectite, and subordinately the dissolution of gypsum and the neoformation of halite. The observed improvements to the plasticity index and cooling kinetics can be explained by the ability of water molecules, and especially cations, to diffuse into the clay particles. The main exchangeable cations are Na+ and Ca2+, along with Mg2+ and K+, which promote swelling and increase water retention and consequently retention of heat in thermal spa treatments. The chemical composition of the major elements is closely linked to the mineralogical compositions of the clays, and also to the chemical composition of the thermal water used in their maturation. The safety profiles of the peloids obtained at different maturation times were evaluated, particularly regarding their content of potentially toxic elements such as arsenic.
Keywords
Information
- Type
- Article
- Information
- Copyright
- © The Author(s), 2025. Published by Cambridge University Press on behalf of The Mineralogical Society of the United Kingdom and Ireland.
References
Abdul, K.S.M., Jayasinghe, S.S., Chandana, E.P., Jayasumana, C. & De Silva, P.M.C. (2015) Arsenic and human health effects: a review. Environmental Toxicology and Pharmacology, 40, 828–846.CrossRefGoogle ScholarPubMed
Agoubi, B. (2021) Review: origin, heating process, and groundwater flow system of non-volcanic thermal aquifers in Tunisia. Arabian Journal of Geosciences, 14, 369.CrossRefGoogle Scholar
Aguzzi, C., Sánchez-Espejo, R., Cerezo, P., Machado, J., Bonferoni, C., Rossi, S. et al. (2013) Networking and rheology of concentrated clay suspensions ‘matured’ in mineral medicinal water. International Journal of Pharmaceutics, 453, 473–479.CrossRefGoogle ScholarPubMed
Akimzhanova, K., Sabitova, A., Mussabayeva, B., Kairbekov, Z., Bayakhmetova, B. & Proch, J. (2024) Chemical composition and physicochemical properties of natural therapeutic mud of Kazakhstan salt lakes: a review. Environmental Geochemistry and Health, 46, 43.CrossRefGoogle ScholarPubMed
Alharbi, R.M., Sholkamy, E.N., Alsamhary, K.I., Abdel-Raouf, N. & Ibraheem, I.B.M. (2023) Optimization study of the capacity of Chlorella vulgaris as a potential bio-remediator for the bio-adsorption of arsenic (III) from aquatic environments. Toxics, 11, 439.CrossRefGoogle ScholarPubMed
Almeida, L., Rocha, F. & Candeias, C. (2023) Geochemical and mineralogical characterization of Ria de Aveiro (Portugal) saltpan sediments for pelotherapy application. Environmental Geochemistry and Health, 45, 3199–3214.CrossRefGoogle Scholar
Aloulou, W., Aloulou, H., Romdhani, M., Duplay, J. & Amar, R.B. (2023) Evaluation of TiO2/smectite nanoparticles as an alternative low-cost adsorbent for chromium removal from industrial wastewater. Desalination and Water Treatment, 281, 296–304.CrossRefGoogle Scholar
Antonelli, M. & Donelli, D. (2018) Effects of balneotherapy and spa therapy on levels of cortisol as a stress biomarker: a systematic review. International Journal of Biometeorology, 62, 913–924.CrossRefGoogle Scholar
Asadullah, M., Jahan, I., Ahmed, M.B., Adawiyah, P., Malek, N.H. & Rahman, M.S. (2014) Preparation of microporous activated carbon and its modification for arsenic removal from water. Journal of Industrial and Engineering Chemistry, 20, 887–896.CrossRefGoogle Scholar
Barhoumi, T., Bekri-Abbes, I. & Srasra, E. (2021) Mineralogical, thermal and rheological characterization of some Tunisian green commercial clays and possible application as peloids with thermal and sea waters. Environmental Geochemistry and Health, 43, 4919–4937.CrossRefGoogle Scholar
Baschini, M.T., Pettinari, G.R., Vallés, J.M., Aguzzi, C., Cerezo, P., López-Galindo, A. & Viseras, C. (2010) Suitability of natural sulphur-rich muds from Copahue (Argentina) for use as semisolid health care products. Applied Clay Science, 49, 205–212.CrossRefGoogle Scholar
Bastos, C.M. & Rocha, F. (2022) Assessment of some clay-based products available on market and designed for topical use. Geosciences, 12, 453.CrossRefGoogle Scholar
Bastos, C.M., Rocha, F., Patinha, C. & Marinho-Reis, P. (2023) Bioaccessibility by perspiration uptake of minerals from two different sulfurous peloids. Environmental Geochemistry and Health, 45, 6621–6641.CrossRefGoogle ScholarPubMed
Bensharada, M., Telford, R., Stern, B. & Gaffney, V. (2022) Loss on ignition vs. thermogravimetric analysis: a comparative study to determine organic matter and carbonate content in sediments. Journal of Paleolimnology, 67, 191–197.CrossRefGoogle Scholar
Borowska, S. & Brzóska, M.M. (2015) Metals in cosmetics: implications for human health. Journal of Applied Toxicology, 35, 551–572.CrossRefGoogle ScholarPubMed
Bouraoui, H., Rebib, H., Aissa, M.B., Touzel, J.P., O’Donohue, M. & Manai, M. (2013) Paenibacillus marinum sp. nov., a thermophilic xylanolytic bacterium isolated from a marine hot spring in Tunisia. Journal of Basic Microbiology, 53, 877–883.CrossRefGoogle Scholar
Brown, G. & Brindley, G.W. (1980) X-ray diffraction procedures for clay mineral identification. Pp. 305–359 in: Crystal Structures of Clay Minerals and Their X-Ray Identification (Brindley, G.W. & Brown, G., editors). Mineralogical Society, London, UK.CrossRefGoogle Scholar
Bruzzoniti, M.C., Abollino, O., Pazzi, M., Rivoira, L., Giacomino, A. & Vincenti, M. (2017) Chromium, nickel, and cobalt in cosmetic matrices: an integrated bioanalytical characterization through total content, bioaccessibility, and Cr(III)/Cr(VI) speciation. Analytical and Bioanalytical Chemistry, 409, 6831–6841.CrossRefGoogle ScholarPubMed
Burollet, P.F. (1991) Structures and tectonics of Tunisia. Tectonophysics, 195, 359–369.CrossRefGoogle Scholar
Caillère, S., Hénin, S. & Rautureau, M. (1982) Mineralogie des argiles. II: classification et nomenclature. Masson, Paris, France, pp. 19–27, .Google Scholar
Calderan, A., Carraro, A., Honisch, C., Lalli, A., Ruzza, P. & Tateo, F. (2020) Euganean therapeutic mud (NE Italy): chlorophyll a variations over two years and relationships with mineralogy and geochemistry. Applied Clay Science, 185, 105361.CrossRefGoogle Scholar
Carretero, M.I. (2020) Clays in pelotherapy. A review. Part I: Mineralogy, chemistry, physical and physicochemical properties. Applied Clay Science, 189, 105526.CrossRefGoogle Scholar
Carretero, M.I., Gomes, C.S.F. & Tateo, F. (2006) Clays and human health. Developments in Clay Science, 1, 717–741.CrossRefGoogle Scholar
Carretero, M.I. & Pozo, M. (2010) Clay and non-clay minerals in the pharmaceutical and cosmetic industries. Part II. Active ingredients. Applied Clay Science, 47, 171–181.CrossRefGoogle Scholar
Carretero, M.I., Pozo, M., Martín-Rubí, J.A., Pozo, E. & Maraver, F. (2010) Mobility of elements in interaction between artificial sweat and peloids used in Spanish spas. Applied Clay Science, 48, 506–515.CrossRefGoogle Scholar
Carretero, M.I., Pozo, M., Sánchez, C., García, F.J., Medina, J.A. & Bernabé, J.M. (2007) Comparison of saponite and montmorillonite behaviour during static and stirring maturation with seawater for pelotherapy. Applied Clay Science, 36, 161–173.CrossRefGoogle Scholar
Cervini-Silva, J., Ramírez-Apan, M.T., Gómez-Vidales, V., Palacios, E., Montoya, A. & de Jesús, E.R. (2015) Anti-inflammatory, anti-bacterial, and cytotoxic activity of fibrous clays. Colloids and Surfaces B: Biointerfaces, 129, 1–6.CrossRefGoogle ScholarPubMed
Chaari, I., Medhioub, M., Jamoussi, F. & Hamzaoui, A.H. (2021) Acid-treated clay materials (southwestern Tunisia) for removing sodium leuco-vat dye: characterization, adsorption study and activation mechanism. Journal of Molecular Structure, 1223, 128944.CrossRefGoogle Scholar
Chakroun, S., Sghaier, D. & Gaied, M.E. (2023) Decolorization of soybean oil by acid-activated Ca-bentonite (EL Gnater, central Tunisia). Environmental Progress & Sustainable Energy, 42, e14015.CrossRefGoogle Scholar
Chalouati, Y., Bennour, A., Mannai, F. & Srasra, E. (2020) Characterization, thermal behaviour and firing properties of clay materials from Cap Bon Basin, north-east Tunisia, for ceramic applications. Clay Minerals, 55, 351–365.CrossRefGoogle Scholar
Choy, J.H., Choi, S.J., Oh, J.M. & Park, T. (2007) Clay minerals and layered double hydroxides for novel biological applications. Applied Clay Science, 36, 122–132.CrossRefGoogle Scholar
Colleuil, B. (1976) Etude stratigraphique et néotectonique des formations néogènes et quaternaires de la région Nabeul-Hammamet (Cap Bon, Tunisie). Mémoire de D.E.S. Univ., Nice, France, 93 pp.Google Scholar
Davinelli, S., Bassetto, F., Vitale, M. & Scapagnini, G. (2019) Thermal waters and the hormetic effects of hydrogen sulfide on inflammatory arthritis and wound healing. Pp. 121–126 in: The Science of Hormesis in Health and Longevity (Rattan, S.I.S. & Kyriazis, M., editors). Academic Press, Washington, DC, USA.Google Scholar
Dhouioui, S., Mzali, H. & Hafsa, K. (2023) Evaluation of groundwater quality in the Takelsa basin (northeastern Tunisia) for irrigation and drinking suitability using water quality index. researchsquare.com. Retreived from Available at https://doi.org/10.21203/rs.3.rs-3192878/v1Google Scholar
Di Benedetto, F., Costagliola, P., Benvenuti, M., Lattanzi, P., Romanelli, M. & Tanelli, G. (2006) Arsenic incorporation in natural calcite lattice: evidence from electron spin echo spectroscopy. Earth and Planetary Science Letters, 246, 458–465.CrossRefGoogle Scholar
Eberl, D.D. & Velde, B. (1989) Beyond the Kubler index. Clay Minerals, 24, 571–577.CrossRefGoogle Scholar
Elmore, A.R. (2003) Final report on the safety assessment of aluminum silicate, calcium silicate, magnesium aluminum silicate, magnesium silicate, magnesium trisilicate, sodium magnesium silicate, zirconium silicate, attapulgite, bentonite, Fuller’s earth, hectorite, kaolin, lithium magnesium silicate, lithium magnesium sodium silicate, montmorillonite, pyrophyllite, and zeolite. International Journal of Toxicology, 22, 37–102.Google ScholarPubMed
Eloussaief, M., Chakroun, S., Kallel, N. & Benzina, M. (2020) Efficiency of clay materials collected from Ain Jeloula (central Tunisia) in sunflower oil decolorization. Euro-Mediterranean Journal for Environmental Integration, 5, 1–10.CrossRefGoogle Scholar
EP (2020) European Pharmacopoeia, 10th edition. Directorate for the Quality of Medicines and Health Care, Strasbourg, France.Google Scholar
European Regulation (2008) On Classification, Labelling and Packaging of Substances and Mixtures, Amending and Repealing Directives 67/548/EEC and 1999/45/EC, and Amending Regulation (EC) No 1907/2006. Official Journal of the European Union, 2008, 1–1355. Available at: https://osha.europa.eu/es/legislation/directives/regulation-ec-no-1272-2008-classification-labelling-and-packaging-of-substances-and-mixturesGoogle Scholar
Ferguson, J.F. & Gavis, J. (1972) A review of the arsenic cycle in natural waters. Water Research, 6, 1259–1274.CrossRefGoogle Scholar
Fernández-González, M.V., Martín-García, J.M., Delgado, G., Párraga, J., Carretero, M.I. & Delgado, R. (2017) Physical properties of peloids prepared with medicinal mineral waters from Lanjarón Spa (Granada, Spain). Applied Clay Science, 135, 465–474.CrossRefGoogle Scholar
Foster, M.D. (1953) Geochemical studies of clay minerals: II – relation between ionic substitution and swelling in montmorillonites. American Mineralogist: Journal of Earth and Planetary Materials, 38, 994–1006.Google Scholar
Gámiz, E., Martín-García, J.M., Fernández-González, M.V., Delgado, G. & Delgado, R. (2009) Influence of water type and maturation time on the properties of kaolinite–saponite peloids. Applied Clay Science, 46, 117–123.CrossRefGoogle Scholar
García-Villén, F., Sánchez-Espejo, R., Borrego-Sánchez, A., Cerezo, P., Perioli, L. & Viseras, C. (2020) Safety of nanoclay/spring water hydrogels: assessment and mobility of hazardous elements. Pharmaceutics, 12, 764.CrossRefGoogle ScholarPubMed
Gáti, T., Tefner, I.K., Kovács, L., Hodosi, K. & Bender, T. (2018) The effects of the calcium–magnesium–bicarbonate content in thermal mineral water on chronic low back pain: a randomized, controlled follow-up study. International Journal of Biometeorology, 62, 897–905.CrossRefGoogle ScholarPubMed
Ghozzi, K., Zemzem, M., Dhiab, R.B., Challouf, R., Yahia, A., Omrane, H. & Ouada, H.B. (2013) Screening of thermophilic microalgae and cyanobacteria from Tunisian geothermal sources. Journal of Arid Environments, 97, 14–17.CrossRefGoogle Scholar
Glavaš, N., Mourelle, M.L., Gómez, C.P., Legido, J.L., Šmuc, N.R., Dolenec, M. & Kovač, N. (2017) The mineralogical, geochemical, and thermophysical characterization of healing saline mud for use in pelotherapy. Applied Clay Science, 135, 119–128.CrossRefGoogle Scholar
Gomes, C.D.S.F. & Silva, J.B.P. (2007) Minerals and clay minerals in medical geology. Applied Clay Science, 36, 4–21.CrossRefGoogle Scholar
Gomes, C. & Rautureau, M. (editors) (2021) Minerals Latu Sensu and Human Health: Benefits, Toxicity and Pathologies. Springer International Publishing, New York, NY, USA, 668 pp.CrossRefGoogle Scholar
Gomes, C.S., Rautureau, M., Gomes, J.H. & Silva, E.A. (2021) Interactions of clay and clay minerals with the human health. Pp. 271–375 in: Minerals Latu Sensu and Human Health: Benefits, Toxicity and Pathologies (Gomes, C. & Rautureau, M., editors). Springer International Publishing, New York, NY, USA.CrossRefGoogle Scholar
Gürses, A., Karaca, S., Ç, Doğar., Bayrak, R., Açıkyıldız, M. & Yalçın, M. (2004) Determination of adsorptive properties of clay/water system: Methylene Blue sorption. Journal of Colloid and Interface Science, 269, 310–314.CrossRefGoogle ScholarPubMed
Hammouda, M.B., Bouaziz, S., Rebai, N. & Rouis, J. (2014) Mapping and analysis of the vulnerability in landslide (case study of Aïn Oktor-Korbous, Cap Bon – northern Tunisia). Presented at: Vertical Geology Conference, Lausanne, Switzerland.Google Scholar
Hamza, W., Chtara, C. & Benzina, M. (2013) Retention of organic matter contained in industrial phosphoric acid solution by raw Tunisian clays: kinetic equilibrium study. Journal of Chemistry, 2013, 218786.CrossRefGoogle Scholar
Hughes, J.C. & Brown, G. (1979) A crystallinity index for soil kaolins and its relation to parent rock, climate and soil maturity. Journal of Soil Science, 30, 557–563.CrossRefGoogle Scholar
IARC (2012) A Review of Human Carcinogens. Metals, Arsenic, Fibres and Dusts. IARC Monograph No. 100 – Part C. IARC Press, Lyon, France, 527 pp.Google Scholar
Jalil, M.E.R., Sanchez, M., Pozo, M., Soria, C.O., Vela, L., Gurnik, N. & Baschini, M. (2020) Assessment of natural and enhanced peloids from the Copahue thermal system (Argentina): effects of the drying procedure on lidocaine adsorption. Applied Clay Science, 196, 105751.Google Scholar
Jeridi, K., Hachani, M., Hajjaji, W., Moussi, B., Medhioub, M., Lopez-Galindo, A. & Jamoussi, F. (2008) Technological behaviour of some Tunisian clays prepared by dry ceramic processing. Clay Minerals, 43, 339–350.CrossRefGoogle Scholar
Kar, S. (2022) Geochemical characteristics of mineral elements: arsenic, fluorine, lead, nitrogen, and carbon. Pp. 209–254 in: Structure and Functions of Pedosphere (Giri, B., Kapoor, R., Wu, Q.S. & Varma, A., editors). Springer, Singapore.CrossRefGoogle Scholar
Khalil, N., Charef, A., Khiari, N., Pérez, C.P.G., Andolsi, M. & Hjiri, B. (2018) Influence of thermal and marine water and time of interaction processes on the Cu, Zn, Mn, Pb, Cd and Ni adsorption and mobility of silty-clay peloid. Applied Clay Science, 162, 403–408.CrossRefGoogle Scholar
Khan, A.H., Rasul, S.B., Munir, A.K.M., Habibuddowla, M., Alauddin, M., Newaz, S.S. & Hussam, A. (2000) Appraisal of a simple arsenic removal method for ground water of Bangladesh. Journal of Environmental Science & Health, Part A, 35, 1021–1041.CrossRefGoogle Scholar
Khan, K.M., Chakraborty, R., Bundschuh, J., Bhattacharya, P. & Parvez, F. (2020) Health effects of arsenic exposure in Latin America: an overview of the past eight years of research. Science of the Total Environment, 710, 136071.CrossRefGoogle ScholarPubMed
Khiari, I., Sánchez-Espejo, R., García-Villén, F., Cerezo, P., Aguzzi, C., López-Galindo, A., Jamoussi, F. & Viseras, C. (2019) Rheology and cation release of Tunisian medina mud-packs intended for topical applications. Applied Clay Science, 171, 110–117.CrossRefGoogle Scholar
Kiełczawa, B. (2018) Balneological use of geothermal springs in selected regions of the world. Pp. 319–364 in: Geothermal Water Management (Bundschuh, J. & Tomaszewska, B., editors). CRC Press, Boca Raton, FL, USA.CrossRefGoogle Scholar
Legido, J.L., Medina, C., Mourelle, M.L., Carretero, M.I. & Pozo, M. (2007) Comparative study of the cooling rates of bentonite, sepiolite and common clays for their use in pelotherapy. Applied Clay Science, 36, 148–160.CrossRefGoogle Scholar
Lock, J.A. & Gouesbet, G. (2009) Generalized Lorenz–Mie theory and applications. Journal of Quantitative Spectroscopy and Radiative Transfer, 110, 800–807.CrossRefGoogle Scholar
Loomis, D., Guha, N., Hall, A.L. & Straif, K. (2018) Identifying occupational carcinogens: an update from the IARC Monographs. Occupational and Environmental Medicine, 75, 593–603.CrossRefGoogle ScholarPubMed
López-Galindo, A., Ruiz, J.T. & Lopez, J.G. (1996). Mineral quantification in sepiolite-palygorskite deposits using X-ray diffraction and chemical data. Clay Minerals, 31, 217–224.CrossRefGoogle Scholar
López-Galindo, A. & Viseras, C. (2004) Pharmaceutical and cosmetic applications of clays. Pp. 267–289 in: Interface Science and Technology (Vol. 1) (Wypych, F. & Satyanarayana, K.G., editors). Elsevier, Amsterdam, The Netherlands.Google Scholar
López-Galindo, A., Viseras, C., Aguzzi, C. & Cerezo, P. (2011) Pharmaceutical and cosmetic uses of fibrous clays. Pp. 299–324 in: Developments in Clay Science (Vol. 3) (Galan, E. & Singer, A., editors). Elsevier, Amsterdam, The Netherlands.Google Scholar
López-Galindo, A., Viseras, C. & Cerezo, P. (2007) Compositional, technical and safety specifications of clays to be used as pharmaceutical and cosmetic products. Applied Clay Science, 36, 51–63.CrossRefGoogle Scholar
Majzlan, J., Drahota, P. & Filippi, M. (2014) Parageneses and crystal chemistry of arsenic minerals. Reviews in Mineralogy and Geochemistry, 79, 17–184.CrossRefGoogle Scholar
Mefteh, S., Khiari, I., Sánchez-Espejo, R., Aguzzi, C., López-Galindo, A., Jamoussi, F. & Viseras, C. (2014) Characterisation of Tunisian layered clay materials to be used in semisolid health care products. Materials Technology, 29, B88–B95.CrossRefGoogle Scholar
Mefteh, S. & Medhioub, M. (2021) Composition, quality, and certification of some Tunisian thermal muds used in pelotherapy. Arabian Journal of Geosciences, 14, 1–16.CrossRefGoogle Scholar
Mefteh, S. & Medhioub, M. (2022) Short-term maturation of clays in a chlorinated sodic mineral water (Ain Echfa, Tunisia). Pp. 303-307 in: Recent Research on Geomorphology, Sedimentology, Marine Geosciences and Geochemistry: Proceedings of the 2nd Springer Conference of the Arabian Journal of Geosciences (CAJG-2), Tunisia 2019 (Çiner, A., Grab, S., Jaillard, E., Doronzo, D., Michard, A., Rabineau, M. & Chaminé, H.I., editors). Springer International Publishing, New York, NY, USA.CrossRefGoogle Scholar
Meng, X., Korfiatis, G.P., Christodoulatos, C. & Bang, S. (2001) Treatment of arsenic in Bangladesh well water using a household co-precipitation and filtration system. Water Research, 35, 2805–2810.CrossRefGoogle ScholarPubMed
Modabberi, S., Namayandeh, A., López-Galindo, A., Viseras, C., Setti, M. & Ranjbaran, M. (2015) Characterization of Iranian bentonites to be used as pharmaceutical materials. Applied Clay Science, 116, 193–201.CrossRefGoogle Scholar
Monteiro de Oliveira, E.C., Caixeta, E.S., Santos, V.S.V. & Pereira, B.B. (2021) Arsenic exposure from groundwater: environmental contamination, human health effects, and sustainable solutions. Journal of Toxicology and Environmental Health, Part B, 24, 119–135.CrossRefGoogle ScholarPubMed
Moore, D.M. & Reynolds, R.C. Jr (1997) X-Ray Diffraction and the Identification and Analysis of Clay Minerals, 2nd edition. Oxford University Press, Oxford, UK, 400 pp.Google Scholar
Moraes, J.D.D., Bertolino, S.R.A., Cuffini, S.L., Ducart, D.F., Bretzke, P.E. & Leonardi, G.R. (2017) Clay minerals: properties and applications to dermocosmetic products and perspectives of natural raw materials for therapeutic purposes – a review. International Journal of Pharmaceutics, 534, 213–219.CrossRefGoogle Scholar
Mossman, B.T. & Glenn, R.E. (2013) Bioreactivity of the crystalline silica polymorphs, quartz and cristobalite, and implications for occupational exposure limits (OELs). Critical Reviews in Toxicology, 43, 632–660.CrossRefGoogle ScholarPubMed
Mouni, L., Belkhiri, L., Bollinger, J.C., Bouzaza, A., Assadi, A., Tirri, A. et al. (2018) Removal of Methylene Blue from aqueous solutions by adsorption on kaolin: kinetic and equilibrium studies. Applied Clay Science, 153, 38–45.CrossRefGoogle Scholar
Ndlovu, B., Farrokhpay, S., Forbes, E. & Bradshaw, D. (2015) Characterisation of kaolinite colloidal and flow behaviour via crystallinity measurements. Powder Technology, 269, 505–512.CrossRefGoogle Scholar
Plançon, A., Giese, R.F. & Snyder, R. (1988) The Hinckley index for kaolinites. Clay Minerals, 23, 249–260.CrossRefGoogle Scholar
Poli, A., Romano, I., Cordella, P., Orlando, P., Nicolaus, B. & Ceschi Berrini, C. (2009) Anoxybacillus thermarum sp. nov., a novel thermophilic bacterium isolated from thermal mud in Euganean hot springs, Abano Terme, Italy. Extremophiles, 13, 867–874.CrossRefGoogle Scholar
Pozo, M., Armijo, F., Maraver, F., Ejeda, J.M. & Corvillo, I. (2018) Texture profile analysis (TPA) of clay/seawater mixtures useful for peloid preparation: effects of clay concentration, pH and salinity. Applied Clay Science, 165, 40–51.CrossRefGoogle Scholar
Proksch, E. (2018) pH in nature, humans and skin. Journal of Dermatology, 45, 1044–1052.CrossRefGoogle ScholarPubMed
Rebelo, M., Viseras, C., López-Galindo, A., Rocha, F. & da Silva, E.F. (2011) Rheological and thermal characterization of peloids made of selected Portuguese geological materials. Applied Clay Science, 52, 219–227.CrossRefGoogle Scholar
Rich, C.I. (1968) Hydroxy interlayers in expansible layer silicates. Clays and Clay Minerals, 16, 15–30.CrossRefGoogle Scholar
Rossi, D., Dobrzyński, D., Moro, I., Zancato, M. & Realdon, N. (2018) The importance of an integrated analytic approach to the study of physicochemical characteristics of natural thermal waters used for pelotherapy aims: perspectives for reusing cooled thermal waters for treatments related to thermalism applications. Pp. 365–389 in: Geothermal Water Management (Bundschuh, J. & Tomaszewska, B., editors). CRC Press, Boca Raton, FL, USA.CrossRefGoogle Scholar
Rusydi, A.F. (2018) Correlation between conductivity and total dissolved solid in various type of water: a review. P. 012019 in: IOP Conference Series: Earth and Environmental Science (Vol. 118). IOP Publishing, Bristol, UK.Google Scholar
Sánchez, C.J., Parras, J. & Carretero, M.I. (2002) The effect of maturation upon the mineralogical and physicochemical properties of illitic-smectitic clays for pelotherapy. Clay Minerals, 37, 457–463.CrossRefGoogle Scholar
Sánchez, M.A., Baschini, M.T., Pozo, M., Gramisci, B.R., Roca Jalil, M.E. & Vela, M.L. (2023) Paraffin–peloid formulations from Copahue: processing, characterization, and application. Materials, 16, 5062.CrossRefGoogle ScholarPubMed
Sasaki, Y., Sathi, G.A. & Yamamoto, O. (2017) Wound healing effect of bioactive ion released from Mg-smectite. Materials Science and Engineering: C, 77, 52–57.Google ScholarPubMed
Sato, T. (1996) Hydroation and structure of adsorbed water on clay minerals. Journal of the Mineralogical Society of Japan, 25, 99–110.CrossRefGoogle Scholar
Schlosser, J., Grathoff, G.H., Ostertag-Henning, C., Kaufhold, S. & Warr, L.N. (2016) Mineralogical changes in organic-rich Posidonia Shale during natural and experimental maturation. International Journal of Coal Geology, 157, 74–83.CrossRefGoogle Scholar
Shah, L.A., Khattak, N.S., Valenzuela, M., Manan, A. & F.V, Díaz. (2013) Preparation and characterization of purified Na-activated bentonite from Karak (Pakistan) for pharmaceutical use. Clay Minerals, 48, 595–603.CrossRefGoogle Scholar
Sher, S. & Rehman, A. (2019) Use of heavy metals resistant bacteria – a strategy for arsenic bioremediation. Applied Microbiology and Biotechnology, 103, 6007–6021.CrossRefGoogle ScholarPubMed
Shomer, I. & Mingelgrin, U. (1978) A direct procedure for determining the number of plates in tactoids of smectites: the Na/Ca-montmorillonite case. Clays and Clay Minerals, 26, 135–138.CrossRefGoogle Scholar
Slade, P.G., Quirk, J.P. & Norrish, K. (1991) Crystalline swelling of smectite samples in concentrated NaCl solutions in relation to layer charge. Clays and Clay Minerals, 39, 234–238.CrossRefGoogle Scholar
Smedley, P.L. & Kinniburgh, D.G. (2002) A review of the source, behaviour and distribution of arsenic in natural waters. Applied Geochemistry, 17, 517–568.CrossRefGoogle Scholar
Smedley, P.L. & Kinniburgh, D.G. (2012) Arsenic in groundwater and the environment. Pp. 279–310 in: Essentials of Medical Geology, revised edition (O. Selinus, editor). Springer Netherlands, Dordrecht, The Netherlands.Google Scholar
Srasra, E. & Bekri-Abbes, I. (2020) Bentonite clays for therapeutic purposes and biomaterial design. Current Pharmaceutical Design, 26, 642–649.CrossRefGoogle ScholarPubMed
Stuhli, V., Ademović, Z., Zohorović, M., Imamović, M., Kurtanović, E. & Kustura, J. (2022) Influence of thermal water types on the properties of pyrophilite peloids. Journal of Advanced Scientific Research, 13, 47–50.CrossRefGoogle Scholar
Summa, V. & Tateo, F. (1998) The use of pelitic raw materials in thermal centres: mineralogy, geochemistry, grain size and leaching tests. Examples from the Lucania area (southern Italy). Applied Clay Science, 12, 403–417.CrossRefGoogle Scholar
Tang, W.W. & Foo, S.C. (2024) Microalgae for freshwater arsenic bioremediation: examining cellular toxicity, bioconcentration factor and eluding an alternative arsenic detoxification pathway. 3 Biotech, 14, 130.CrossRefGoogle ScholarPubMed
Tateo, F., Agnini, C., Carraro, A., Giannossi, M.L., Margiotta, S., Medici, L. & Summa, V. (2010) Short-term and long-term maturation of different clays for pelotherapy in an alkaline-sulphate mineral water (Rapolla, Italy). Applied Clay Science, 50, 503–511.CrossRefGoogle Scholar
Tateo, F., Ravaglioli, A., Andreoli, C., Bonina, F., Coiro, V., Degetto, S. & Summa, V. (2009) The in-vitro percutaneous migration of chemical elements from a thermal mud for healing use. Applied Clay Science, 44, 83–94.CrossRefGoogle Scholar
Tateo, F. & Summa, V. (2007) Element mobility in clays for healing use. Applied Clay Science, 36, 64–76.CrossRefGoogle Scholar
Thorez, J. (1976) Practical Identification of Clay Minerals: A Handbook for Teachers and Students in Clay Mineralogy. G. Lelotte, Dison, Belgium, 90 pp.Google Scholar
Trabelsi, S., Makni, J., Bouri, S. & Dhia, H.B. (2015) Hydrochemistry of thermal waters in northeast Tunisia: water–rock interactions and hydrologic mixing. Arabian Journal of Geosciences, 8, 1743–1754.CrossRefGoogle Scholar
Trabelsi, W. & Tlili, A. (2017) Phosphoric acid purification through different raw and activated clay materials (southern Tunisia). Journal of African Earth Sciences, 129, 647–658.CrossRefGoogle Scholar
USP (2010) 33 – National Formulary 28. US Pharmacopoeial Convention, Rockville, MD, USA.Google Scholar
USP (2020) United States Pharmacopeia and National Formulary (USP-NF), 43rd edition. United States Pharmacopeial Convention, Rockville, MD, USA.Google Scholar
Veniale, F., Barberis, E., Carcangiu, G., Morandi, N., Setti, M., Tamanini, M. & Tessier, D. (2004) Formulation of muds for pelotherapy: effects of ‘maturation’ by different mineral waters. Applied Clay Science, 25, 135–148.CrossRefGoogle Scholar
Viseras, C., Aguzzi, C., Cerezo, P. & Lopez-Galindo, A. (2007) Uses of clay minerals in semisolid health care and therapeutic products. Applied Clay Science, 36, 37–50.CrossRefGoogle Scholar
Viseras, C., Carazo, E., Borrego-Sánchez, A., García-Villén, F., Sánchez-Espejo, R., Cerezo, P. & Aguzzi, C. (2019) Clay minerals in skin drug delivery. Clays and Clay Minerals, 67, 59–71.CrossRefGoogle Scholar
Viseras, C., Meeten, G.H. & Lopez-Galindo, A. (1999) Pharmaceutical grade phyllosilicate dispersions: the influence of shear history on floc structure. International Journal of Pharmaceutics, 182, 7–20.CrossRefGoogle ScholarPubMed
Wang, Q., Li, Y. & Wang, Y. (2011) Optimizing the weight loss-on-ignition methodology to quantify organic and carbonate carbon of sediments from diverse sources. Environmental Monitoring and Assessment, 174, 241–257.CrossRefGoogle ScholarPubMed
Wang, Y., Wang, S., Xu, P., Liu, C., Liu, M., Wang, Y. & Ge, Y. (2015) Review of arsenic speciation, toxicity and metabolism in microalgae. Reviews in Environmental Science and Bio/Technology, 14, 427–451.CrossRefGoogle Scholar
WHO (2011) Guidelines for drinking-water quality (vol. 216, pp. 303–304). World Health Organization. Available at https://www.who.int/publications/i/item/9789241548151Google Scholar
WHO (2013) Traditional medicine strategy 2014–2023. Available at https://apps.who.int/iris/bitstream/handle/10665/92455/9789241506090_eng.pdfGoogle Scholar
Wilson, M.J. (1987) A Handbook of Determinative Methods in Clay Mineralogy. Chapman and Hall, New York, NY, USA, 299 pp.Google Scholar
Wright, J.A., Richards, T. & Srai, S.K. (2014) The role of iron in the skin and cutaneous wound healing. Frontiers in Pharmacology, 5, 156.CrossRefGoogle ScholarPubMed
Yamamura, S. & Amachi, S. (2014) Microbiology of inorganic arsenic: from metabolism to bioremediation. Journal of bioscience and bioengineering, 118, 1–9.CrossRefGoogle ScholarPubMed
Yazdani, M.R., Tuutijärvi, T., Bhatnagar, A. & Vahala, R. (2016) Adsorptive removal of arsenic (V) from aqueous phase by feldspars: kinetics, mechanism, and thermodynamic aspects of adsorption. Journal of Molecular Liquids, 214, 149–156.CrossRefGoogle Scholar
Yin, Y., Zhou, T., Luo, H., Geng, J., Yu, W. & Jiang, Z. (2019) Adsorption of arsenic by activated charcoal coated zirconium-manganese nanocomposite: performance and mechanism. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 575, 318–328.CrossRefGoogle Scholar