Volume 62 - Issue 3 - June 2014
Article
Interactions of Radioactive and Stable Cesium with Hydroxy-Interlayered Vermiculite Grains in Soils of the Savannah River Site, South Carolina, USA
- Momoko Goto, Robert Rosson, W. Crawford Elliott, J. M. Wampler, Steven Serkiz, Bernd Kahn
-
- Published online by Cambridge University Press:
- 01 January 2024, pp. 161-173
-
- Article
- Export citation
-
Sorption and fixation of Cs by the upland soils of the US Department of Energy’s Savannah River Site (SRS) have been attributed to micaceous grains consisting mostly of hydroxy-interlayered vermiculite (HIV). Results of experiments to characterize SRS soil samples, to examine aspects of their radiocesium sorption, and to determine how much of their natural Cs is accessible for chemical extraction and isotope dilution are presented in support of mechanistic hypotheses to explain Cs sorption and fixation in HIV grains. The HIV is responsible for most of the soil cation exchange capacity, and concentrations of naturally occurring Cs, Rb, and K in soil samples are closely related to the concentration of HIV. Experiments with 137Cs to examine (1) sorption kinetics, (2) blocking of exchange sites with silver thiourea, and (3) susceptibility of sorbed 137Cs to chemical extraction, support the idea that added Cs is sorbed at different kinds of cation exchange sites in HIV grains. Sites highly selective for Cs but relatively few in number are inferred to exist in interlayer wedge zones within such grains. Little of the naturally occurring Cs in the soil samples was extractable by chemical agents that would remove Cs from ordinary cation-exchange sites and from within non-silicate soil components. Furthermore, most of the natural Cs was inaccessible for isotope dilution under slightly acidic conditions approximating the natural soil environment. These observations support the idea that most of the Cs in these soils has become effectively fixed in the narrower parts of interlayer wedge zones. Control of Cs uptake and fixation by highly Csselective interlayer wedge sites would account for the large distribution coefficients found for 137Cs at the low aqueous Cs concentrations typical of environmental systems and also for the relatively large concentrations of stable Cs in the SRS soils.
The Pore Structure of Compacted and Partly Saturated MX-80 Bentonite at Different Dry Densities
- Lukas M. Keller, Ali Seiphoori, Philippe Gasser, Falk Lucas, Lorenz Holzer, Alessio Ferrari
-
- Published online by Cambridge University Press:
- 01 January 2024, pp. 174-187
-
- Article
- Export citation
-
Compacted MX-80 bentonite is a potential backfill material in radioactive-waste repositories. Pore space in MX-80 has been the subject of considerable debate. 3D reconstructions of the pore space based on tomographic methods could provide new insights into the nature of the pore space of compacted bentonites. To date, few such reconstructions have been done because of problems with the preparation of bentonite samples for electron microscopy. The nanoscale intergranular pore space was investigated here by cryo-Focused Ion Beam nanotomography (FIB-nt) applied to previously high-pressure frozen MX-80 bentonite samples. This approach allowed a tomographic investigation of the in situ microstructure related to different dry densities (1.24, 1.46, and 1.67 g/cm3). The FIB-nt technique is able to resolve intergranular pores with radii >10 nm. With increasing dry density (1.24–1.67 g/cm3) the intergranular porosity (>10 nm) decreased from ~5 vol.% to 0.1 vol.%. At dry densities of 1.24 and 1.46 g/cm3, intergranular pores were filled with clay aggregates, which formed a mesh-like structure, similar to the honeycomb structure observed in diagenetic smectite. Unlike ‘typical’ clay gels, the cores of the honeycomb structure were not filled with pure water, but instead were filled with a less dense material which presumably consists of very fine clay similar to a colloid. In the low-density sample this honeycomb-structured material partly filled the intergranular pore space but some open pores were also present. In the 1.46 g/cm3 sample, the material filled the intergranular pores almost completely. At the highest densities investigated (1.67 g/cm3), the honeycomb-structured material was not present, probably because of the lack of intergranular pores which suppressed the formation of the honeycomb framework or skeleton consisting of clay aggregates.
The Interaction Between Bentonite and Water Vapor. I: Examination of Physical and Chemical Properties
- Michel Heuser, Christian Weber, Helge Stanjek, Hong Chen, Guntram Jordan, Wolfgang W. Schmahl, Carsten Natzeck
-
- Published online by Cambridge University Press:
- 01 January 2024, pp. 188-202
-
- Article
- Export citation
-
The influence of water vapor on bentonites or smectites is of interest in many different fields of applied mineralogy such as nuclear-waste sealing or casting in the foundry industry. The water vapor affects the smectite surface and perhaps its structure probably leading to mostly unfavorable changes in its properties. In this first part of the present study, the influence of hot water vapor (200°C) on the physicochemical and mineralogical properties of smectite-group minerals was studied. After the steam treatment, turbidity measurements, methylene-blue sorption, water adsorption, and cation exchange capacity (CEC) were measured on both untreated and treated samples. Mineralogical changes were monitored by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) was used to measure O, Al, and Si. Only a few parameters showed differences between the untreated and vapor-treated samples. Sedimentation volumes (SV) decreased following the treatment. As shown by XRD and XPS, the crystalline structure of smectite remained unaffected by the steam treatment. Equivalent sphere diameters (ESD) were not affected systematically by the steam treatment. Differences in CEC values between untreated and treated samples were observed, but only for smectites with monovalent interlayer cations. From the variety of different measurements the conclusion of the present study was that steam treatment changes the charge properties at or near the smectite particle surface.
Application of the Dynamic Cultivation System for Microorganisms — A New Way to Culture the Unculturables
- René Kaden, Eve Menger-Krug, Katja Emmerich, Kerstin Petrick, Peter Krolla-Sidenstein
-
- Published online by Cambridge University Press:
- 01 January 2024, pp. 203-210
-
- Article
- Export citation
-
To date, ~1% of all bacteria that occur in environmental ecosystems such as soil, sedimentary rocks, and groundwater have been described. Comprehensive explanation of ecological interactions on a microscale level is thus almost impossible. The Dynamic Cultivation System (DCS) was developed in order to detect more microbial taxa than with common cultivation approaches, as well as previously undescribed bacterial species. The DCS is a quick and easy in situ method for the cultivation of numerous bacterial taxa in support of the description of microbial colonized ecosystems. To investigate the bacterial populations within a clay-maturation process after mining the raw material, the DCS was used to increase the microbial biomass for further molecular analysis. Two different methods were applied to extract the bacteria from the DCS and these were compared in terms of efficiency at detection of large numbers of different taxa and in terms of applicability to the detection of previously undescribed species in raw clays. A collection of different undescribed species was detected with sequencing. While direct picking of bacterial colonies leads to the detection of different genera, species mainly of the genus Arthobacter were proved in the phosphate-buffered saline-suspended biomass. Thus, a combination of the approaches mentioned above is recommended to increase the number of detectable species. The DCS will help to describe better the microbial content of ecosystems, especially soils that contain charged particles.
The Surface Modification of Zeolite 4A and Its Effect on the Water-Absorption Capability of Starch-G-Poly (Acrylic Acid) Composite
- Zhang Yan, Zhao Lin, Ma Kai, Mao Guozhu
-
- Published online by Cambridge University Press:
- 01 January 2024, pp. 211-223
-
- Article
- Export citation
-
The surface modification of Zeolite 4A using cetyl trimethyl ammonium bromide (CTAB) as a modifier via an ultrasonic method was carried out and the surface physicochemical properties measured. Response surface methodology (RSM) was developed with CTAB concentration, handling time, and handling temperature as variables, to help predict the performance of the modified zeolite under particular conditions. The influence of organic-modified surface treatment and of the amount of modified zeolite on the water-absorption capability of starch-g-poly (acrylic acid) hydrogel composites was also assessed. The results showed that the channels and skeleton structure of zeolite 4A were unchanged after organic modification by CTAB and the surface modification was effective. The results suggest that organic-modified zeolite 4A has improved the water-absorption capability.
Methods for In Situ SIMS Microanalysis of Boron and its Isotopes in Palagonite
- Bruce D. Pauly, Lynda B. Williams, Richard L. Hervig, Peter Schiffman, Robert A. Zierenberg
-
- Published online by Cambridge University Press:
- 01 January 2024, pp. 224-234
-
- Article
- Export citation
-
Boron has been shown to be a useful trace element in clay-mineralization reactions, raising the possibility that B studies may provide a means to investigate environmental controls on palagonitization. The objective of the present study was to address calibration, matrix effects, and B exchangeability issues such that meaningful secondary ion mass spectrometry (SIMS) microanalysis of B in thin sections of palagonite will be feasible. Silver Hill illite (IMt-1) was found to be a suitable calibration reference material, based on compositional similarity, relatively high B content, and ease of mounting on thin-section samples for SIMS microanalysis. Matrix effects of borated sideromelane and illite were compared and found to be similar, confirming previous studies which showed no matrix effects for B among minerals. Boron substitutes for Si in tetrahedral sites and also can be adsorbed in exchangeable sites of 2:1 clay minerals. Similarly, B can be found in tetrahedral and exchangeable sites within palagonite, which consists of both layered and amorphous volumes. In order to measure tetrahedral B content and isotopic ratio in the palagonite, exchangeable B was removed by soaking sample thin sections in a 1 M NH4Cl solution until exchangeable cation concentrations were constant. Treated samples showed decreases in B content and isotopic ratio with exchange. Extraction of exchangeable B permits the direct measurement of tetrahedral B content and isotopic ratio. The exchange technique devised and tested here should have broad applicability to thin-section microanalysis of B in clay and clay-like materials where cation exchange can be used for surface-analytical techniques. The present study represents an initial attempt to address samplepreparation, calibration, and potential matrix-effects problems for analyses by SIMS. Further refinements may improve the accuracy of the measurements, but the results presented here indicate that meaningful measurements are possible.
The Dissolution of Amorphous Silica in the Presence of Tropolone Under Acidic Conditions
- Mayumi Etou, Yutaka Tsuji, Kenji Somiya, Yoshihiro Okaue, Takushi Yokoyama
-
- Published online by Cambridge University Press:
- 01 January 2024, pp. 235-242
-
- Article
- Export citation
-
Dissolution of amorphous silica or silicate is an important reaction to release silicic acid in natural water and this reaction is affected by several factors. The existence of a natural organic compound, tropolone, because of its abundance, is of particular importance. In the present study, the dissolution of amorphous silica in the presence of tropolone (HL) was investigated in an aqueous solution under acidic conditions. The dissolution is controlled by the reaction between silicic acid and tropolone (Si(OH)4 + 3HL + H+ ⇌ SiL3+ + 4H2O), where the conditional formation constant K = [SiL3+]/[Si(OH)4][HL]3[H+]). The solubility of amorphous silica in the presence of tropolone was significantly greater than that in pure water due to the formation of the Si-tropolonate complex in the solution. The acceleration of silica dissolution by tropolone depends on the reaction pH and tropolone concentration. The solubility of the amorphous silica in the tropolone solution at pH 1 was approximately ten times greater than in the 0.1 mol/dm3 HCl used as a reference. This increase in the solubility correlates to a K value of the Si-tropolone complex at each pH. From the solubility experiments, the conditional formation constants (log K) of the Si-tropolonate complex at each reaction pH 1, 2, and 3 were 6.39, 5.88, and 5.77, respectively. The significant acceleration of the dissolution of amorphous silica by tropolone at pH 1 can be attributed to the large formation constant of the Si-tropolonate complex.