Introduction
Gyrodactylid flatworms of the genus Macrogyrodactylus Malmberg, Reference Malmberg1957 represent the largest individuals of the family (Malmberg, Reference Malmberg1957). They are host-specific and site-specific with many preferring the gills of their freshwater fish hosts and others occurring only on the skin and fins (Paperna, Reference Paperna1996). Site specificity in macrogyrodactylids was first reported by Arafa et al. (Reference Arafa, El-Naggar and Kearn2013) in Macrogyrodactylus congolensis (Prudhoe, Reference Prudhoe1957) and Macrogyrodactylus clarii Gussev, Reference Gussev1961, which infect the skin and gills of Clarias gariepinus (Burchell, 1822), respectively. Arafa et al. (Reference Arafa, El-Naggar and Kearn2013) noticed that neither of these species would attach when placed on the incorrect host tissue. Similar to all other monogeneans, Macrogyrodactylus parasites attach to their host using a haptor, which is also taxonomically significant (Khalil & Mashego, Reference Khalil and Mashego1998). Malmberg (Reference Malmberg1957) described gyrodactylids of the genus Macrogyrodactylus to have ‘one pair of anchors (hamuli) and 16 marginal fingers (hooks), two of which are triangular and point obliquely anteriad’. Haptoral structures in different Macrogyrodactylus species differ by size or shape (Malmberg, Reference Malmberg1957; Khalil & Mashego, Reference Khalil and Mashego1998; Přikrylová & Gelnar, Reference Přikrylová and Gelnar2008; Barson et al., Reference Barson, Přikrylová, Vanhove and Huyse2010). The male copulatory organ (cirrus) can also be used to distinguish Macrogyrodactylus species (Khalil & Mashego, Reference Khalil and Mashego1998; N'Douba & Lambert, Reference N'Douba and Lambert1999). This organ develops at a particular stage of their life, consisting of a large spine surrounded by smaller spines which differ in number between species (Malmberg, Reference Malmberg1957). For example, Khalil & Mashego (Reference Khalil and Mashego1998) recorded 10–11 small spines in Macrogyrodactylus polypteri Malmberg, Reference Malmberg1957, 12–13 in M. clarii, and 14–15 small spines in M. congolensis and Macrogyrodactylus karibae Douëllou & Chishawa, Reference Douëllou and Chishawa1995.
Taxonomic studies of monogeneans are traditionally based on the morphology of haptoral sclerites as they differ between species (Shinn et al., Reference Shinn, Gibson and Sommerville1993). This involved utilizing compound light microscopy to examine flat-mounted parasite specimens and measuring specific sclerites (Shinn et al., Reference Shinn, Gibson and Sommerville1993). However, several authors observed that in preparation of specimens for microscopical examination, the shape and or size of structures may be altered as a result of coverslip pressure or the type of fixative used, resulting in inconsistent measurements (Mo & Appleby, Reference Mo and Appleby1990; Shinn et al., Reference Shinn, Gibson and Sommerville1993; Fankoua et al., Reference Fankoua, Nyom, Bahanak, Bilong Bilong and Pariselle2017). To resolve this, Mo & Appleby (Reference Mo and Appleby1990) proposed the examination of isolated haptoral sclerites with scanning electron microscopy (SEM) by digesting the surrounding soft tissue with pepsin-based artificial gastric juices. Unfortunately, not all sclerites could be seen, hence Harris et al. (Reference Harris, Cable, Tinsley and Lazarus1999) removed the surrounding tissue with a digestion buffer containing tris hydrochloride, ethylenediaminetetraacetic acid, and sodium dodecyl sulphate (proteinase K as the active enzyme) as an alternative. Moreover, Hahn et al. (Reference Hahn, Bakke, Bachmann, Weiss and Harris2011) digested the parasites on polylysine-coated slides to avoid loss of sclerites during digestion with a digestion buffer from a DNA extraction kit. Dos Santos & Avenant-Oldewage (Reference Dos Santos and Avenant-Oldewage2015) also reported using polylysine-coated slides to be effective for the isolation of sclerites in Paradiplozoon vaalense Dos Santos, Jansen van Vuuren & Avenant-Oldewage, 2013, but concavity slides were said to be more effective as digestion is restricted to the area of the concavity. The current study is the first to follow and modify this technique to examine isolated haptoral sclerites of a Macrogyrodactylus species with SEM.
Matejusová et al. (Reference Matejusová, Gelnar, Verneau, Cunningham and Littlewood2003) presented the first molecular data for Macrogyrodactylus with the study on M. polypteri. To date, all valid species have been genetically characterized. The most common genetic markers used for DNA profiles of macrogyrodactylids are 18S and internal transcribed spacer (ITS; ITS1-5.8S-ITS2) regions of rDNA (Matejusová et al., Reference Matejusová, Gelnar, Verneau, Cunningham and Littlewood2003; Barson et al., Reference Barson, Přikrylová, Vanhove and Huyse2010; Přikrylová et al., Reference Přikrylová, Vanhove, Janssens, Billeter and Huyse2013; Vanhove et al., Reference Vanhove, Briscoe, Jorissen, Littlewood and Huyse2018; Truter et al., Reference Truter, Acosta, Weyl and Smit2021). Macrogyrodactylus karibae is the only species with additional 28S rDNA data, while cytochrome oxidase subunit 1 (COI) mtDNA data are available for M. karibae, M. clarii and Macrogyrodactylus heterobranchii N'Douba & Lambert, Reference N'Douba and Lambert1999, as well as hybrids of the latter two species (Matejusová et al., Reference Matejusová, Gelnar, Verneau, Cunningham and Littlewood2003; Barson et al., Reference Barson, Přikrylová, Vanhove and Huyse2010; Vanhove et al., Reference Vanhove, Briscoe, Jorissen, Littlewood and Huyse2018).
Materials and methods
Sample collection
Specimens of an unidentified monogenean parasite were removed from the skin of heavily infected C. gariepinus by performing a skin scrape with a glass microscope slide. These fish were acquired from a fish farm for another study and the parasites were unintentionally introduced into the research aquarium at the University of Johannesburg (Maduenyane et al., Reference Maduenyane, Dos Santos and Avenant-Oldewage2022). Parasites were either mounted fresh as detailed below for light microscopy study, stored in 70% ethanol (Sigma-Aldrich, Germany) for examination with SEM, or stored in 96% ethanol for molecular analysis and study of isolated haptoral sclerites using SEM.
Light microscopy and morphometry
Specimens were individually placed on a microscope glass slide with a small volume of water and covered with a coverslip, the latter adhered to the slide by applying a small drop of nail varnish on each corner. Thereafter, filter paper was used to withdraw excess water by capillary action from the sides of the coverslip before a drop of glycerine ammonium picrate (GAP, one part of saturated ammonium picrate solution and one part of glycerine) (Malmberg, Reference Malmberg1957) was placed at the edge of the coverslip, allowing it to slowly diffuse. Finally, all four sides of the coverslip were sealed with clear nail varnish. Specimens were initially observed using a Zeiss Stemi 350 stereomicroscope (Carl Zeiss, Germany), after which a Zeiss Axioplan 2 imaging light microscope with Axiovision 4.7.2 software was used to obtain photomicrographs using phase contrast. Haptoral sclerites (hamulus, dorsal bar, ventral bar, long and short rods and marginal hooks) of GAP mounted specimens were measured as per Přikrylová & Gelnar (Reference Přikrylová and Gelnar2008) and compared to measurements for M. congolensis by Khalil & Mashego (Reference Khalil and Mashego1998), El-Naggar et al. (Reference El-Naggar, Kearn, Hagras and Arafa1999), Přikrylová & Gelnar (Reference Přikrylová and Gelnar2008), Barson et al. (Reference Barson, Přikrylová, Vanhove and Huyse2010) and Truter et al. (Reference Truter, Acosta, Weyl and Smit2021). Obtained photomicrographs were used to create line drawings of sclerites (shown in fig. 1) using CorelDRAW (Taylor & Karney, Reference Taylor and Karney1990), which were then compared to available illustrations (Khalil & Mashego, Reference Khalil and Mashego1998; El-Naggar et al., Reference El-Naggar, Kearn, Hagras and Arafa1999; Přikrylová & Gelnar, Reference Přikrylová and Gelnar2008; Barson et al., Reference Barson, Přikrylová, Vanhove and Huyse2010; Truter et al., Reference Truter, Acosta, Weyl and Smit2021).
(A) light micrograph of the male copulatory organ (encircled) consisting of one large spine surrounded by 20 small spines (scale bar = 20 μm); (B) light micrograph of a flattened haptor of Macrogyrodactylus congolensis (Prudhoe, Reference Prudhoe1957) in glycerine ammonium picrate (scale bar = 100 μm); and (C) line drawing of haptoral sclerites (scale bar = 100 μm). a - dorsal bar, b - hamulus, c - ventral bar, d - long ventral bar rod, e - short ventral bar rod, f - marginal hook.
Morphology by SEM
For examination of isolated haptoral sclerites the methods of Nation (Reference Nation1983) and Dos Santos & Avenant-Oldewage (Reference Dos Santos and Avenant-Oldewage2015) were modified. Ten specimens previously preserved in 96% ethanol were re-hydrated, haptors removed with dissection needles, haptors individually placed on either a regular or concavity microscope slide, and digested in 1 μl of digestion buffer from a NucleoSpin® Tissue kit (Macherey-Nagel, Düren, Germany). The process was observed using a stereomicroscope. Once the soft tissues had partially digested, a coverslip was placed on top of the haptors that were digested on regular slides and affixed by the corners with nail vanish. After that 10 μl of distilled water was continually added at the sides to avoid crystallization of the digestion buffer. Once the digestion endpoint was observed (i.e., when only the sclerites remained), 10 μl of distilled water was added to one side of the coverslip and drawn out with a glass micropipette on the opposite side. This was repeated 3–4 times to ensure that all the digestion buffer and digested tissue was removed and only the sclerotized structures remained under the coverslip. Slides were then placed in a Sanpla dry keeper desiccator cabinet (Kita-Ku, Osaka, Japan) to dry overnight. Once dry, the coverslip was removed carefully from the microscope slide and repositioned upside down next to the dried area on the same slide. An Emscope SC500 sputter coater (Quorum Technologies, Lewes, UK) was used to coat the specimens with gold prior to examination using a TESCAN Vega 3 LMH SEM (Brno, Czech Republic) at 5 kV acceleration voltage.
DNA extraction and amplification
Genomic DNA was extracted from 10 parasite specimens stored in 96% ethanol using a NucleoSpin® Tissue kit (Macherey-Nagel, Düren, Germany). Three molecular markers (ITS rDNA, 18S rDNA and COI mtDNA) were used to study the identity and evolutionary history of the parasites. The internal transcribed spacer region of ribosomal DNA (ITS1 to 2) was amplified using the primers ITS1-fm (5′-TAGAGGAAGTACAAGTCG-3′) (Rubio-Godoy et al., Reference Rubio-Godoy, Razo-Mendivil, Garcia-Vasquez, Freeman, Shinn and Paladini2016) and ITS2R (5′-TCCTCCGCTTAGTGATA-3′) (Cunningham, Reference Cunningham1997). A polymerase chain reaction (PCR) was conducted under the following conditions: 5 min at 95°C, then 30 cycles for 1 min at 95°C, 1 min at 48°C, 2 min at 72°C, and a final elongation of 10 min at 72°C. Secondly, a fragment of 18S rDNA was amplified using the primers 18S-E (5′-CCGAATTCGTCGACAACCTGGTTGATCCTGCCAGT-3′) and 18S-F (5′-CCAGCTTGATCCTTCTGCAGGTTC-3′) (Littlewood & Olson, Reference Littlewood, Olson, Littlewood and Bray2001) with the following PCR conditions: 5 min at 95°C, then 30 cycles of 1 min at 95°C, 1 min at 58°C, 2 min at 72°C, and finally 10 min at 72°C. Finally, COI mtDNA was amplified using primers specifically designed for macrogyrodactylids, Macro_F1 (5′-CATAAGCGTGTWGGTGTTATTTATAG -3′) and Macro_R1 (5′-ACCTCTGGATGTCCAAARAATC -3′) with the following PCR conditions: 5 min at 94°C, then 35 cycles of 45 s at 94°C, 45 s at 48°C, 2 min at 72°C, and finally 10 min at 72°C. Agarose gel (1%) impregnated with GelRed® (Biotium) was used for verification of successful amplification using an ultra-violet transilluminator (Labnet International, Inc.).
Sequencing and phylogeny
Amplicons were sequenced using standard BigDye chemistry and analysed on an ABI 3137 Automated Sequencer (Applied Biosystems, Foster City, CA, USA). Geneious Prime version 2019.1.1 (http://www.genious.com) was used to inspect, edit if required, merge and align obtained sequences. Resulting haplotypes were compared to sequences of other Macrogyrodactylus species from online data repositories. Gyrdicotylus gallieni Vercammen-Grandjean, 1960 was included as an outgroup for the ITS analysis, Gyrodactylus carassii (Malmberg, Reference Malmberg1957) for the 18S analysis, and Gyrodactylus parvae You, Easy & Cone, 2008 for COI analysis; these species were chosen due to their proximity to obtained haplotypes as per Basic Local Alignment Search Tool (Altschul et al., Reference Altschul, Gish, Miller, Myers and Lipman1990). Genetic distances were determined using number of base pair differences and pairwise distances based on uncorrected p-distances in MEGA 7 (Tamura et al., Reference Tamura, Stecher, Peterson, Filipski and Kumar2013). Phylogenetic topologies were constructed using maximum likelihood (ML) and Bayesian inference (BI) approaches. For ML, the Tamura 3-parameter model (Tamura, Reference Tamura1992) with Gamma distribution (5 categories (+G, parameter = 0.0500)) was selected for 18S as determined using the Model Selection tool in MEGA 7, while the Hasegawa–Kishino–Yano model (Hasegawa et al., Reference Hasegawa, Kishino and Yano1985) was selected for both ITS and COI analyses, with Gama distribution (5 categories (+G, parameter = 0.3323)) for ITS and evolutionarily invariable sites ([+I], 54.83%) for COI. The robustness of topologies was assessed using 1000 bootstrap replicates. For BI, BEAST v2.5.0 (Bouckaert et al., Reference Bouckaert, Heled, Kühnert, Vaughan, Wu, Xie, Suchard, Rambaut and Drummond2014) was used with 10 million Markov chain Monte Carlo generations and the abovementioned models. Generated DNA sequences were submitted to GenBank under the following accession numbers: 18S rDNA (OM424629-33); ITS1 to 2 rDNA (OM426797-03); and COI mtDNA (OM456987-96).
Results and discussion
From the obtained light micrographs, it was observed that the features of the examined parasite specimens correspond with the diagnosis for M. congolensis. There was melanin deposition in the intestine of the parasites similar to what was observed by Khalil & Mashego (Reference Khalil and Mashego1998) for skin parasites of C. gariepinus. Both M. karibae and M. clarii have also been recorded from C. gariepinus, but lack pigmentation in the gut indicating that they are gill parasites (Khalil & Mashego, Reference Khalil and Mashego1998). Arafa et al. (Reference Arafa, El-Naggar and Kearn2013) observed the feeding mechanism of M. congolensis and stated that this parasite feeds on mucus and epithelia of the skin of its fish host, explaining the presence of darkly pigmented granules in the intestine of M. congolensis. These melanin granules have also been noted to be absorbed by the intestinal epithelium of the parasite (Maduenyane et al., Reference Maduenyane, Dos Santos and Avenant-Oldewage2022)
The male copulatory organ consisted of one large spine surrounded by 20 small spines (n = 20). The first record of the number of spines for M. congolensis was by Prudhoe (Reference Prudhoe1957) who recorded 15 small spines, followed by Douëllou & Chishawa (Reference Douëllou and Chishawa1995) who reported 14 small spines and Khalil & Mashego (Reference Khalil and Mashego1998) who recorded 14–15 small spines. Truter et al. (Reference Truter, Acosta, Weyl and Smit2021) recorded 18–20 small spines on the male copulatory organ of M. congolensis overlapping with the measurements obtained in the present study. These discrepancies in the number of small spines in M. congolensis need further investigation as this may indicate that this trait is unreliable, or the possibility of cryptic species.
Overall haptoral sclerite morphology of M. congolensis presented in El-Naggar et al. (Reference El-Naggar, Kearn, Hagras and Arafa1999), Khalil & Mashego (Reference Khalil and Mashego1998), Přikrylová & Gelnar (Reference Přikrylová and Gelnar2008), Barson et al. (Reference Barson, Přikrylová, Vanhove and Huyse2010) and Truter et al. (Reference Truter, Acosta, Weyl and Smit2021) was identical to that of Macrogyrodactylus specimens from the current study (see line drawing and light micrograph in figs 1b, c and 2a–l). The haptor of M. congolensis (figs 1b, c and 2a–l, table 1) has two hamuli interconnected by a horizontal dorsal bar, a Y-shaped ventral bar consisting of two anterior lateral arms and a very short posterior central arm. Articulating the ventral bar is a pair of long ventral bar rods which are connected to a pair of short ventral bar rods. The anterior part of this short ventral bar rod has a narrow, rod-like anterior, that is made up of sclerotized material, but changes into a broad semi-sclerotized structure at the posterior end. The terminal end of the haptor is armed with marginal hooklets comprising a hook handle attached to a sickle. All specimens were armed with 16 marginal hooklets of similar morphology, 14 at the posterior end of the haptor and two extending from the anterolateral lobes.
Scanning electron micrographs showing different haptoral sclerites of Macrogyrodactylus congolensis. (a) dorsal side of hamulus (scale bar = 100 μm); (b) ventral side of hamulus (scale bar = 100 μm); (c) marginal hook (scale bar = 20 μm); (d) enlarged view of the hook sickle (scale bar = 5 μm); (e) dorsal side of short ventral bar rod (scale bar = 20 μm); (f) ventral side of short ventral bar rod (scale bar = 20 μm); (g) side view of the long ventral bar rod (scale bar = 100 μm); (h) dorsal aspect of long ventral bar rod (scale bar = 50 μm); (i) dorsal aspect of the dorsal bar (scale = 50 μm); (j) ventral aspect of the ventral bar (scale bar = 50 μm); (k) dorsal aspect of the ventral bar (scale bar = 50 μm); and (l) a coloured reconstruction of the haptor using the scanning electron microscopy images of isolated haptoral sclerites showing pair of hamuli, dorsal bar, ventral bar, a pair of long ventral bar rods, a pair of short ventral bar rods and 16 marginal hooks (14 at the margins of the haptor and 2 pointing anteriad at each side of the haptor) (scale bar = 100 μm). Colours of the labels correspond with the structure in the reconstructed haptoral sclerites.
Measurements (all in μm) of haptoral sclerites of specimens from the present study (boldface type) in comparison to known data of the three Macrogyrodactylus species parasitizing Clarias gariepinus.
n = number of measurements.
a * indicate that dorsal bar is divided.
The construction of the short ventral bar rod from specimens of the present study (fig. 2a–l) corresponded with that presented in Khalil & Mashego (Reference Khalil and Mashego1998), Přikrylová & Gelnar (Reference Přikrylová and Gelnar2008), Barson et al. (Reference Barson, Přikrylová, Vanhove and Huyse2010) and Truter et al. (Reference Truter, Acosta, Weyl and Smit2021) for M. congolensis, but was dissimilar to that provided in El-Naggar et al. (Reference El-Naggar, Kearn, Hagras and Arafa1999). According to El-Naggar et al. (Reference El-Naggar, Kearn, Hagras and Arafa1999), the short ventral bar rod was described and illustrated as an ‘inverted Y-shaped accessory sclerite’, as opposed to the wedge shape in the current and all other previous studies. It is possible that El-Naggar et al. (Reference El-Naggar, Kearn, Hagras and Arafa1999) may have misinterpreted the structure of the sclerite due to the use of light microscopy. This emphasizes the importance of the isolation and subsequent SEM study of sclerites.
Comparing the two other species of Macrogyrodactylus parasitizing C. gariepinus, the dorsal bar in M. clarii is divided into two small sclerites articulating with each other medially (Gussev, Reference Gussev1961; El-Naggar & Serag, Reference El-Naggar and Serag1987; El-Naggar et al., Reference El-Naggar, Arafa, El-Abbassy, Kearn and Cable2020), while this structure is fused, forming a single continuous sclerite in M. congolensis (figs 1b, c and 2i, l) and M. karibae (Prudhoe, Reference Prudhoe1957; Khalil & Mashego, Reference Khalil and Mashego1998). Furthermore, the dorsal bar has a small central ridge at the top in M. karibae. Another distinction is that in M. karibae and M. clarii the ventral bar has relatively short anterior lateral arms and an elongated posterior central arm, with the latter much longer in M. clarii (El-Naggar & Serag, Reference El-Naggar and Serag1987; Khalil & Mashego, Reference Khalil and Mashego1998; El-Naggar et al., Reference El-Naggar, Kearn, Hagras and Arafa1999; El-Naggar et al., Reference El-Naggar, Arafa, El-Abbassy, Kearn and Cable2020).
Although the morphology of the haptoral sclerites (fig. 2a–l) was mostly identical to those presented in other studies (El-Naggar et al., Reference El-Naggar, Kearn, Hagras and Arafa1999; Khalil & Mashego, Reference Khalil and Mashego1998; Přikrylová & Gelnar, Reference Přikrylová and Gelnar2008; Barson et al., Reference Barson, Přikrylová, Vanhove and Huyse2010; Truter et al., Reference Truter, Acosta, Weyl and Smit2021), the obtained haptoral sclerite morphometry showed variation. Sclerite measurements for M. congolensis provided by Khalil & Mashego (Reference Khalil and Mashego1998) were smaller than those obtained in the present study, except for dorsal bar length and width, as well as the hamulus total length, which was larger in the specimens studied by Khalil & Mashego (Reference Khalil and Mashego1998). Moreover, when measurements obtained in the current study (table 1) were compared to those presented by Přikrylová & Gelnar (Reference Přikrylová and Gelnar2008) for M. congolensis, there were differences in measurements of the hamulus root and shaft lengths, dorsal bar width and the long ventral bar rod length, which were larger in the present study while the measurements of the other sclerites overlapped. Haptoral sclerite measurements presented in Barson et al. (Reference Barson, Přikrylová, Vanhove and Huyse2010) overlap greatly with those obtained in the present study, with variation only observed in measurements of the dorsal and ventral bar width, hamulus shaft length, posterior central arm length and the length of the long ventral bar rod. In comparison to sclerite measurements by Truter et al. (Reference Truter, Acosta, Weyl and Smit2021) the total length of the hamulus as well as the total length of the marginal hooks were larger than in the present study. Measurements of the dorsal bar overlapped with other studies. Overall, the majority of sclerite measurements from the present study correlated with those in other studies (table 1).
Additional features that were considered for morphological comparison were the size and shape of marginal hooks as proposed by Přikrylová & Gelnar (Reference Přikrylová and Gelnar2008). As can be seen in table 1, descriptions before 2008 do not include measurements of the marginal hook total length, hook handle, proximal sickle width and sickle length. Moreover, the obtained measurements of the pharynx and testis were compared to those in El-Naggar et al. (Reference El-Naggar, Kearn, Hagras and Arafa1999). Measurements of the anterior and posterior region of the pharynx had similar features in the present study and that by El-Naggar et al. (Reference El-Naggar, Kearn, Hagras and Arafa1999) as the posterior region of the pharynx was larger than the anterior region. Specimens from the current study had a smaller anterior and posterior pharynx than those in El-Naggar et al. (Reference El-Naggar, Kearn, Hagras and Arafa1999). The testis as reported by El-Naggar et al. (Reference El-Naggar, Kearn, Hagras and Arafa1999) was larger than those from the present study; however, the testis was found to be longer than wide in both studies. Therefore, all morphological data support that the specimens studied here are M. congolensis and it is also the only Macrogyrodactylus species infecting the skin of C. gariepinus.
Five informative sequences of 18S rDNA were obtained representing two haplotypes. The two haplotypes only differed at one site which was polymorphic in the first haplotype and resolved in the second. The obtained alignment with available data was 1942 base pairs (bp) with 1809 bp conserved, 121 bp variable, and 26 bp parsimony informative. The first haplotype was identical (online supplementary table S1) to sequence data for both M. congolensis (HF548680) and M. karibae (MG973078), with the second haplotype only differing from these sequences by 0.05% (1 bp). As such, using the available 18S rDNA data for Macrogyrodactylus, the specimens could not be positively identified. Based on available 18S rDNA for macrogyrodactylids (excluding hybrids), no intraspecific ranges could be calculated, but the very low interspecific range of 0–2.08% (0–38 bp) indicates a highly conserved 18S rDNA region. Seven viable sequences for ITS rDNA were obtained, displaying four haplotypes. Similar to 18S rDNA, the haplotypes only differed in the resolution of polymorphic sites, with 9–18 polymorphic sites depending on the haplotype. The obtained alignment with available data was 922 bp with 545 bp conserved, 327 bp variable and 125 bp parsimony informative. Irrespective the number of polymorphic sites, all haplotypes were identical to that of M. congolensis from South Africa (MZ869848), only differing by 0.63–0.87% (4–7 bp) and 0.75–1.11% (6–9 bp) from the same species in Senegal (GU252717) and Kenya (GU252716), respectively (online supplementary table S2). Based on available ITS rDNA data for macrogyrodactylids (excluding hybrids), an intraspecific range of 0–1.95% (0–14 bp) and an interspecific range of 0.83–23.01% (6–156 bp) was observed. There is a large overlap in these ranges, primarily due to the proximity of M. clarii and M. heterobranchii which are known to hybridize (Barson et al., Reference Barson, Přikrylová, Vanhove and Huyse2010) and secondarily the proximity of M. congolensis and M. karibae. Distances of ITS rDNA of studied material to available data for M. congolensis are more likely to represent intraspecific than interspecific variation, thus confirming the identity of the specimens. The larger distance between specimens from South Africa to those in Kenya and Senegal, and the similarity between data from the latter two countries, may indicate a correlation between geographical proximity and genetic variability, but this needs further investigation.
Sequence data for COI mtDNA was obtained from all studied specimens, representing two haplotypes. The two haplotypes only differed at one site. The obtained alignment with available data was 641 bp with 413 bp conserved, 228 bp variable and 147 bp parsimony informative. Based on available COI mtDNA for macrogyrodactylids (excluding hybrids), no intraspecific ranges could be calculated, but an interspecific range of 4.91–18.93% (21–81 bp) was observed (online supplementary table S3). The two haplotypes of COI mtDNA only differed by 0.23% (1 bp) and were 16.82–19.63% (72–103 bp) from other macrogyrodactylid data. This indicated that the variation observed is likely intraspecific, and the M. congolensis is distinct from other species based on COI mtDNA. The current study presents the first mitochondrial data for M. congolensis. It is noteworthy that M. congolensis is more distant to M. karibae using COI mtDNA (16.82–17.06%; 72–73 bp) than the latter species to either M. clarii (14.49%; 62 bp) or M. heterobranchii (14.49%; 62 bp). This is in contrast to the results from rDNA analyses and warrants further investigation. However, the close relation of M. clarii and M. heterobranchii in rDNA analyses is mirrored in the mtDNA analyses of these species (4.91%; 21 bp), as well as their hybrids (0.23%–5.14%; 1–22 bp). No mtDNA data are currently available for M. polypterid or M. simentiensis.
Phylogenies based on both 18S and ITS rDNA produced similar topologies (online supplementary figs S1 and S2). In both cases, the sequence data from the present study grouped with available data for M. congolensis. For ITS rDNA, M. congolensis formed a sister clade to M. karibae, while for 18S rDNA these two species formed a single clade. In both topologies, the clade containing M. congolensis and M. karibae was sister to a clade containing M. clarii, M. heterobranchii and the hybrids of these two species. Interestingly, in the 18S rDNA phylogeny, M. simentiensis grouped with hybrids of M. clarii and M. heterobranchii, as opposed to its placement in the ITS rDNA topology where it is basal to the aforementioned clades. Finally, M. polypteri is basal to all other macrogyrodactylids in both analyses. The phylogeny based on COI mtDNA differs greatly from this based on rDNA in that M. congolensis groups sister to all other macrogyrodactylid data (online supplementary fig. S3). As such, M. karibae groups with M. clarii and M. heterobranchii (and their hybrids). This may indicate that COI mtDNA is not suitable to infer phylogenetic relationships of macrogyrodactylid taxa, but it does show promise for species identification.
The isolation of haptoral sclerites resolved the morphology of some sclerites, alongside the first reconstruction of the haptor of a Macrogyrodactylus species using SEM. 18S rDNA did not show any distinction between M. karibae and M. congolensis. However, these species are morphologically distinct, indicating that 18S rDNA is not suitable to distinguish closely related taxa due its conserveness. Based on ITS rDNA and COI mtDNA, M. congolensis and M. karibae could be distinguished indicating the usefulness of these markers. Further research regarding molecular analysis and the suitability of additional markers for species identification and phylogenetic studies, as well as further study of isolated haptoral sclerites of other macrogyrodactylids, is required.
Supplementary material
To view supplementary material for this article, please visit https://doi.org/10.1017/S0022149X22000037.
Acknowledgements
The authors thank Professor Ina Wagenaar for infected fish specimens, the members of the Parasitology Laboratory at the University of Johannesburg (UJ) for laboratory assistance, and the spectrum analytical facility at UJ for the use of equipment and facilities.
Financial support
The Foundational Biodiversity Information Programme of South Africa, National Research Foundation of South Africa to MM. University of Johannesburg Global Excellence and Stature 4.0 (UJ GES) MSc scholarship to MM and a PDRF to QMDS. University of Johannesburg, Faculty Research Fund and Central Research Fund for running expenses to AAO.
Conflict of interest
All authors declare that they have no conflict of interest.
Ethical standards
The authors assert that all procedures contributing to this work comply with the ethical standards of the relevant national and institutional guides on the care and use of laboratory animals.
Open access
