Hostname: page-component-76fb5796d-9pm4c Total loading time: 0 Render date: 2024-04-25T21:13:36.608Z Has data issue: false hasContentIssue false

Highly Transparent and High Haze ZnO:Al film For Front TCO of a-Si:H and μc-Si:H Solar Cells by Controlling Oxygen Flow

Published online by Cambridge University Press:  31 January 2011

Dong-Won Kang
Affiliation:
kangdwn@emlab.snu.ac.kr, Seoul National University, Seoul, Korea, Republic of
Seung-Hee Kuk
Affiliation:
milleft@emlab.snu.ac.kr, Seoul National University, Seoul, Korea, Republic of
Kwang-Sun Ji
Affiliation:
jski1101@lge.com, SE group, LGE Advanced Research, Seoul, Korea, Republic of
Seh-Won Ahn
Affiliation:
swahn@lge.com, LGE Advanced Research, SE group, Seoul, Korea, Republic of
Min-Koo Han
Affiliation:
mkh@snu.ac.kr, Seoul National University, Seoul, Korea, Republic of
Get access

Abstract

We fabricated highly transparent and high haze ZnO:Al film for front TCO of amorphous and microcrystalline silicon solar cells. We have sputtered ZnO:Al film of 1.3 μm on the thin seed layer of about 60nm which was previously sputtered on the glass substrate by using 4% dilution of oxygen to argon gas. The ZnO:Al film grown on the seed layer had much higher crystalline phase than one without any seed layer. Our bi-layer ZnO:Al film showed low resistivity of 2.66×10-4 Ω•cm and sheet resistance of 2.08 Ω/⇐ while conventional ZnO:Al film showed resistivity of 3.24×10-4 Ω•cm and sheet resistance of 2.46 Ω/⇐. After surface texturing by 0.5% HCl wet-chemical etching, the transmittance of ZnO:Al film was increased from 83.7% to 88.1% at wavelength of 550nm through the seed layer. Also the transmittance at 800nm was increased from 82.3% to 88.9%. Especially, haze values of the ZnO:Al film were drastically increased from 58.7% to 90.6% at wavelength of 550nm by employing the seed layer. Also haze values at 800nm were increased from 22.1% to 68.1%. It is expected that the seed layer method to improve the quality of ZnO:Al film will contribute to an increase of solar cell efficiency due to the high capability of light trapping and low electrical resistivity.

Type
Research Article
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1]. Yoo, Jinsu, Lee, Jeonghul, Kim, Seokki, Yoon, Kyunghoon, and Park, I. Jun, Dhungel, S.K. Karunagaran, B., Mangalaraj, D., and Yi, Junsin : Thin Solid Films (2005) 480481 Google Scholar
[2]. Nakada, T., Ohkubo, Y. and KunioKa, A., Jpn, J. Appl. Phys., 1991 30 3344 Google Scholar
[3]. Krĉ, J., Zeman, M., Kluth, O., Smole, F., and Topic, M.: Thin Solid Films 426 (2003)Google Scholar
[4]. Muller, Joachim, Rech, Bernd, Springer, Jiri, and Vanecek, Milan, Solar Energy 77 (2004)Google Scholar
[5]. Chen, X.L. Geng, X.H. Xue, J.M. and Li, L.N. Journal of Crystal Growth 299 (2007)Google Scholar
[6]. Hsu, C.Y. Ko, T.F. and Huang, Y.M.: Euro, J.. Ceramic Soc. 28 (2008) 30653070 Google Scholar
[7]. Zhanga, Y., Zhenga, H., Sua, J., Lina, B. and Fu, Z.: J. Lumin. 124 (2007), 252.Google Scholar
[8]. Fujita, M., Kawamoto, N., Sasajima, M. and Horikoshi, Y.: J. Vac. Sci.Technol. B 22 (2004) 1484.Google Scholar
[9]. Onuma, T., Chichibu, S. F., Uedono, A., Yoo, Y. Z., Chikyow, T., Sota, T. et al. : Appl. Phys. Lett., 85 (2004) 5586.Google Scholar
[10]. Koike, K., Komuro, T., Ogata, K., Sasa, S., Inoue, M. and Yano, M., Phys. E 21 (2004) 679.Google Scholar
[11]. Sun, X.W. Wang, L.D. and Kwok, H.S.: Thin Solid Films 360 (2000)Google Scholar
[12]. Cullity, B.D. p. 102, Elements of X-ray Diffraction, 2nd Edition, Addison Wesley, Reading, MA, 1978.Google Scholar
[13]. Kluth, Oliver, Schöpe, Gunnar, Rech, Bernd, Menner, Richard, Oertel, Mike, Orgassa, Kay, and Schock, Hans Werner: Thin Solid Films, 502, (2006)Google Scholar