Hostname: page-component-76fb5796d-x4r87 Total loading time: 0 Render date: 2024-04-25T23:09:35.197Z Has data issue: false hasContentIssue false
  • English
  • Français

Photo-oxidized Coating on the Optical Materials for High Power Laser Resistance and Waterproof

Published online by Cambridge University Press:  16 July 2012

Yuji Sato ,
Eiichi Matsunaga ,
Yoshiaki Okamoto  and
Masataka Murahara
Yuji Sato
Affiliation:
Innovative Research Initiative, Tokyo Institute of Technology P.O.Box I3-26 2-12-1, O-okayama, Meguro-ku, Tokyo 152-8552, Japan
Eiichi Matsunaga
Affiliation:
Innovative Research Initiative, Tokyo Institute of Technology P.O.Box I3-26 2-12-1, O-okayama, Meguro-ku, Tokyo 152-8552, Japan
Yoshiaki Okamoto
Affiliation:
Okamoto optics co. 8-34 Haramachi, Isogo-ku, Yokohama, Kanagawa, 235-0008 Japan
Masataka Murahara
Affiliation:
Innovative Research Initiative, Tokyo Institute of Technology P.O.Box I3-26 2-12-1, O-okayama, Meguro-ku, Tokyo 152-8552, Japan
Get access

Abstract

A photo-oxidized thin film, which transformed the organic silicone oil into inorganic glass, was coated on optical materials surface by using Xe2 excimer lamp at room temperature. This technique has enabled an optical thin coating capable of transmitting ultraviolet rays [UV] of wavelengths under 200 nm and possessing the characteristics of hardness, strain-free, resistance to high power laser, and resistance to water. UV and IR spectroscopic analysis was carried out for investigation of the oxidized silicone oil. The results revealed that the absorption peak of the CH3 group at 2900 cm-1 decreased as the irradiation time of the excimer lamp increased, and the transmittance of the light in the 172 nm wavelengths conversely became high. The UV transmittance of the silicone oil was 29.2 % before the lamp irradiation; and it improved to 90.6 % after the irradiation for 120 minutes. Moreover, in order to evaluate for resistance to laser damage [J/cm2/10 ns], the films were further irradiated with the Nd: YAG laser of ω [1.06 μm] or 2ω [0.503 μm]. The silica glass substrate had almost same laser tolerance in ω and 2ω, 112 J/cm2 and 113 J/cm2, respectively. The laser damage threshold of the photo-oxidized 100 nm thick film formed on the fused silica substrate was 72 J/cm2 in ω and 107 J/cm2 in 2ω.

Keywords

coatingoptical propertiesphotochemical
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1401: Symposium T – Large-Area Processing and Patterning for Active Optical and Electronic Devices III , 2012 , mrsf11-1401-t05-23
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Mahajan, A.M., Patil, L.S., Bange, J.P., and Gautam, D.K., Vacuum, Vol.79, pp194–202 (2005)Google Scholar
2. Dennler, G., Houdayer, A., Raynaud, P., Seguy, I., Seguy, Y., and Wertheimer, M.R., Nuclear Instruments and Methods in Physics Research B, Vol.208, pp176–180 (2003)Google Scholar
3. Orlowski, T.E and Richter, H., Applied Physics Letter, Vol.45, No.3, pp1 (1984)Google Scholar
4. Awazu, K., Journal of Non-Crystalline Solids, Vol.337, pp241–253 (2004)Google Scholar
5. Murahara, M., Journal of the Japan Society for Technology of Plasticity, 27(8), No.307, 934–942 (1986) in JapaneseGoogle Scholar
6. Murahara, M., Journal of the Japan Society for Precision Engineering, 53, 1692 (1987) in JapaneseGoogle Scholar
7. Murhara, M., Sato, N., and Ikadai, A., Optics Letters 30(24) 3416–18 (2005)Google Scholar
8. Sato, Y., Murahara, M., Jitsuno, T., and Okamoto, Y., Proc. of SPIE Vol.7842 78224 (2010)Google Scholar
9. Okabe, H., “Photochemistry of Small Molecules”, John Wiley & Sons, Inc., New York (1978)Google Scholar