Introduction
Suriname has been one of the leading bauxite and alumina producers in the world for more than 90 years (Patterson et al., Reference Patterson, Kurtz, Olson and Neeley1986; Aleva & Wong, Reference Aleva and Wong1998; Gurmend, Reference Gurmendi2014). Its lateritic bauxite deposits are distributed in two major geographic areas with different origins, properties and exploitation histories. Coastal bauxites formed on sedimentary parent rocks in the coastal zone and have been mined since the early 20th century, whereas Plateau bauxites originated on metamorphic rocks in interior parts of the country and have not been productive to date. Bauxite deposits of economic interest occur in four districts (Fig. 1):
-
1. the Paranam–Onverdacht–Lelydorp district (Coastal), which includes the Lelydorp 1, Kankantrie and Para bauxite deposits
-
2. the Moengo–Ricanau–Jones district (Coastal) with the Coermotibo deepseated bauxite deposit
-
3. the Bakhuis district (Plateau) with the Bakhuis bauxite deposit
-
4. the Nassau district (Plateau), which encompasses the Nassau, Brownsberg, Lely bauxite and Wintiwaai laterite deposits.
Districts of coastal- and plateau-type deposits of bauxite in Suriname.
Aleva & Wong (Reference Aleva and Wong1998) presented a detailed history of Suriname's bauxite. The first academic descriptions of bauxite in Suriname were written at the end of the 19th century. The Surinaamsche Bauxiet Maatschappij (SBM) was established in 1916 after the discovery of the Moengo bauxite hills in 1915 by the Pittsburg Reduction Company, later renamed the Aluminum Company of America (Alcoa). In 1939, the N.V. Billiton Maatschappij obtained a concession for bauxite exploration in the Para district, which led to the discovery of the Onverdacht bauxite deposit. Suriname was one of the leading bauxite-producing countries in the world during the Second World War (1939–1945), which generated a boost in bauxite exploration and research on the local deposits. In 1941, the SBM opened the Paranam bauxite processing plant, named after the Para and Suriname Rivers bordering the mining concession areas. In 1958, SBM signed the Brokopondo Agreement with the Surinamese Government to create a fully integrated aluminum industry in the country, and became the Suriname Aluminum Company (Suralco). The most important objectives were the construction of a dam in the Suriname River and a hydro-electric power facility at Afobakka, and the establishment of an aluminum smelter and an alumina refinery at Paranam. The smelter operated from 1964 till 1999 and was dismantled one year later and the refinery closed in November 2015. In 1993, Suralco and Billiton signed a joint venture about mining and refining activities but Billiton halted its exploration and mining activities in Suriname in 2009, while Suralco is also reducing its activities. The Suralco is currently mining the remnants of some bauxite deposits in the Moengo area and the Lelydorp 1 deposit. The Lelydorp 1 mine has a total estimated reserve of 3.1 Mt and was not considered of significant economic interest in the past (www.alcoa.com).
This paper presents a geological overview of Suriname's bauxite deposits, including a comparison with West African bauxites, and a summary of the exploitation history and economic impact for the country.
General geological background of Surinamese bauxite deposits
The bauxite deposits in South America are situated in four subprovinces of the Amazon Platform. The Guiana Shield subprovince includes bauxite deposits of Venezuela, Guyana, Suriname, French Guiana and Brazil (Fig. 2). The Coastal Plain subprovince contains bauxite deposits of Suriname and Guyana, while Brazilian bauxite deposits occur in the Guiana Shield, Amazon Basin and Central Brazil subprovinces.
Overview of the most important bauxite deposits of the Guiana Shield (Guiana Shield subprovince) with its Phanerzoic cover (Coastal Plain subprovince) (modified after Bárdossy & Aleva, Reference Bárdossy and Aleva1990).
Suriname is located on the Guiana Shield in the northeastern sector of South America. Precambrian rocks make up about 80% of the country, forming a crystalline basement, and the remaining 20% consists of Cretaceous to Recent sediments that were deposited along the northern fridge of the Guiana Shield (Coastal Plain) (Fig. 3a). The Guiana Shield stretches from Venezuela, Guyana, Suriname and French Guiana to Brazil (Fig. 2).
A. Geological map of Suriname with boundary line between the sedimentary coastal area to the north and the crystalline basement to the South (modified after www.staatsolie.com and Kroonenberg et al., Reference Kroonenberg and De Roever2015); B. The planation levels, stratigraphy and pollen zones of Suriname (Van der Hammen & Wijmstra, Reference Van der Hammen and Wijmstra1964; Wong, Reference Wong1989; Bárdossy & Aleva, Reference Bárdossy and Aleva1990; Wong et al., Reference Wong, De Kramer, De Boer, Langereis and Sew-A-Tjon2009).
Five planation levels can be distinguished on the Guiana Shield (King et al., unpub.; Aleva, Reference Aleva1979; Bárdossy & Aleva, Reference Bárdossy and Aleva1990): (1) Summit Level, Jurassic to Cretaceous, (2) Main Aluminous Laterite Level, Early Tertiary, (3) Foothill Level, Oligocene to early Miocene, (4) Pediplane Level, Pliocene and (5) Valley Floor Level, Pleistocene to recent (Fig. 3b). The major bauxite and aluminous laterite horizons on the Guiana Shield are related to the well-developed and widespread Main Aluminous Laterite Level (Van Kersen, Reference Van Kersen1956; Wong Reference Wong1989; Aleva & Wong, Reference Aleva and Wong1998).
The age of this palaeosurface is well documented by Paleocene pollen from unconsolidated sediments (arkosic sands or kaolin) below, and Miocene sediments on the top of some of the major economic bauxite deposits in Guyana and Suriname (Van der Hammen et al., Reference Van der Hammen and Wijmstra1964). A long period of non-deposition during the Late Eocene to Oligocene is known as the ‘Bauxite hiatus’, during which intense weathering resulted in bauxitisation of the upper part of the Onverdacht Formation (Aleva & Wong, Reference Aleva and Wong1998; Wong et al., Reference Wong, De Kramer, De Boer, Langereis and Sew-A-Tjon2009).
In Suriname, bauxite deposits formed on two different types of parent rock:
-
1 Sedimentary parent rocks in the coastal area (Coastal plain or Lowland bauxites).
The Coastal plain or Lowland bauxites formed at the expense of Cenozoic sediments in a bauxite belt running subparallel to the ‘Old coastal plain’, an accumulation of continental sediments that were deposited along a paleo-coastline during Early Cenozoic times (Valeton, Reference Valeton1983; Aleva & Wong, Reference Aleva and Wong1998). As such, they belong to the global elongate belts of lateritic bauxite deposits in Cretaceous and Tertiary coastal plains, following Lower Tertiary shorelines of India and South America (Valeton, Reference Valeton1983). The Surinamese Coastal plain bauxites have an average thickness of 6 m, a relatively low Fe2O3 content (2%), a SiO2 content of 5–7% and an average available alumina content of more than 50%. They can be subdivided into (i) surface bauxite deposits with less than 5 m overburden and (ii) buried or deep-seated bauxite deposits with up to 40 m overburden.
-
2 Crystalline parent rocks in the hinterland (Plateau or Highland bauxites).
The Plateau or Highland bauxites are mostly developed on intermediate to basic Precambrian igneous or metamorphic rocks of the Guiana Shield (Van Kersen, Reference Van Kersen1956; Bárdossy & Aleva, Reference Bárdossy and Aleva1990) (Fig. 1). They are found on plateaus (250–650 m above mean sea level) and have an average thickness of 4 m with little or no overburden (<1 m). The deposits are relatively Fe2O3 rich (15–20%) and SiO2 poor (2–4%), and have an average available alumina content of 45%.
Coastal plain deposits
Coermotibo bauxite deposit
The Coermotibo bauxite, named after the Coermotibo River, is a buried deposit belonging to the Moengo–Ricanau–Jones bauxite district, also known as the Moengo Group of deposits (Bárdossy & Aleva, Reference Bárdossy and Aleva1990) (Fig. 4A, B), located in the eastern part of the Guiana Coastal Plain at 5°32ʹN, 54°18ʹW. Here, a bauxite-capped plateau with a total surface area of approximately 20 km2 is split over 25 hills, varying in size between 0.03 and 7 km2. The bauxite layer is 3–6 m thick. All deposits but one (Coermotibo) stood out 25–70 m above the surrounding plain. The original geological reserve was approximately 127 Mt, and all of the exposed flat-topped bauxite hills are currently mined out except for the Coermotibo deposit, which has a reserve of 18–37 Mt. This bauxite deposit, with an overburden of approximately 40 m, was discovered in June 1959 during reconnaissance core drilling along the Coermotibo River, but was neglected due to its high sulfide content and resilication (Bárdossy & Aleva, Reference Bárdossy and Aleva1990) despite a high average Al content (51%) and a low average Fe2O3 content (4%). The high sulfur content of the bauxite is linked to large quantities of marcasite (FeS2). Much of the deposit is located beneath a swamp, which probably created the reducing conditions favourable for marcasite formation in the grey bauxite.
A. Distribution of the bauxite deposits in the Moengo–Ricanau–Jones district. Mined hills are highlighted in blue and the Coermotibo deposit in red (modified after Bárdossy & Aleva, Reference Bárdossy and Aleva1990); B. Cross-section through the bauxite deposits in the Moengo–Ricanau–Begi Gado–Jones district (modified after Bárdossy & Aleva, Reference Bárdossy and Aleva1990).
Successor Mines (Klaverblad, Kaaimangrasi, Caramacca)
The Klaverblad, Kaaimangrasi, Caramacca bauxite deposits, better known as the Successor Mines, are located in the vicinity of the Paranam–Onverdacht–Lelydorp bauxite district (5°20ʹN, 55°20ʹW; Fig. 5A). Only five of the 13 deposits of the Paranam–Onverdacht–Lelydorp bauxite district had outcrops (1, 3, 5, 6 and 7 in Fig. 5A), whereas the remaining deposits were covered by a thick packet of sediments. Most the bauxite-capped hills are underlain by Early Eocene and Paleocene sediments. Exploration of this bauxite district started in 1939, while mining commenced in 1941. The district originally consisted of 13 bauxite deposits, several of which are currently mined out. The original reserves of 100 Mt were based on a cutoff grade of Fe2O3 < 30% and TSiO2 < 15%.
A. Location of the original bauxite deposits in the Paranam–Onverdacht–Lelydorp bauxite district (indicated in blue). The Successor Mines are highlighted in red (modified after Bárdossy & Aleva, Reference Bárdossy and Aleva1990); B. Schematic relative position of the bauxite deposits of Successor Mines in a south–north section; C. Weathering profile in the Klaverblad deposit.
The Klaverblad (KLB), Kaaimangrasie (KMG) and Caramacca (CRM) deposits were discovered during the Brokopondo bauxite exploration campaign in the early 1960s and 1970s (Fig. 5B). The overburden at KLB was approximately 15 m thick and consisted of Neogene and Quaternary sediments, while the sedimentary cover of the KMG and CRM deposits consisted of Quaternary sediments with thicknesses of 4 and 9 m, respectively (Successor Mines Project feasibility study, unpub.) (Fig. 5B, C). Mining of the Successor Mines started in 2004, and the remnants of the Caramacca deposit were mined in 2015. The initial reserve of the Successor Mines was 16 Mt.
Plateau deposits
Bakhuis Mountains
The Bakhuis Mountains form a chain of strongly dissected plateaus in the district of Sipaliwini (4°45ʹN, 56°40ʹW). They are an expression of a 25 km wide and 95 km long NE-SW striking horst (Fig. 2a) (Kroonenberg & de Roever, Reference Kroonenberg and De Roever1975; Kroonenberg, Reference Kroonenberg1976). It covers an area of approximately 2400 km2 (Fig. 6A). Hilltops reach a height of approximately +480 m MSL. The climate is tropical humid with an average temperature of 27.5°C and 1700–2200 mm of rainfall, divided over a long and a short rainy season. The basement of the Bakhuis Mountains consists of high-grade metamorphic rocks which includes banded (mafic and intermediate) granulites, sillimanite gneisses with mafic and felsic intrusive bodies (Fig. 2a) (De Roever et al., Reference De Roever, Kieft, Murray, Klein and Drucker1976, Reference De Roever, Lafon, Delor, Cocherie, Rossi, Guerrot and Potrel2003; Klaver et al., Reference Klaver, De Roever, Nanne, Mason and Davies2015; Kroonenberg et al., Reference Kroonenberg and De Roever2015). The banded granulites and sillimanite gneisses underwent high-grade (UHT) metamorphism between 2.055 and 2.072 Ga (de Roever et al., 2003). The charnockite intrusions in the southwest part of the horst are formed at 1984.4 to 1992.5 Ma (Klaver et al., Reference Klaver, De Roever, Nanne, Mason and Davies2015).
A. Geological map of the Bakhuis Mountains horst (modified after Klaver et al., Reference Klaver, De Roever, Nanne, Mason and Davies2015); B. Approximately 2.4 km long west–east profile in Area 10. Note the highly variable grade and ore thickness in the horizontal direction (modified after Janssen, Reference Janssen1963).
Variable compositions of bauxite weathering profiles reflect the large diversity of parent rocks (Aleva & Hilversum, Reference Aleva, Hilversum and Jacob1984) (Fig. 6B), which, together with different drainage conditions, is also responsible for the variable thicknesses of the bauxite body. Locally, lenses of kaolinite-rich material occur within the bauxite horizon, and lenses and boulders of bauxite material within the kaolinitic saprolite (Fig. 6B) (Pollack, Reference Pollack1981; Aleva & Hilversum, Reference Aleva, Hilversum and Jacob1984). Exposures of fresh bedrock and boulders along slopes, hill tops, creek beds and within the lateritic bauxite body are common. The bauxite resources of the Bakhuis Mountain are estimated to be larger than 500 Mt and contain an average of 34% available alumina and 2% reactive silica (www.bauxietinstituut.com).
Nassau Mountains
The Nassau Mountains in the Marowijne district in northeast Suriname (4°46ʹ–4°54ʹN, 54°30ʹ–54°38ʹW) form an isolated, U-shaped mountain ridge (20 × 20 km2), which is bordered by the Professor W.J. Van Blommenstein Lake to the west and the Marowijne River to the East (Fig. 7). The ridge comprises four steep-sided, laterite-capped plateaus (A–D) at elevations between 500 and 564 m above mean sea level (Alonso & Mol, Reference Alonso and Mol2007). The mountains receive some of the highest rainfall in the country (2750–3000 mm/year, even more on the plateaus) due to orographic effects and mist interception (Alonso & Mol, Reference Alonso and Mol2007 and references therein).
Elevation map of the Nassau Mountains showing plateaus and concession limits (Van den Bergh, Reference Van den Bergh2011).
The Nassau Mountains and surrounding areas belong to the NW-SE striking Trans-Amazonian Marowijne Greenstone Belt with zircon ages between 2.26 and 2.10 Ga (Delor et al., Reference De Roever, Lafon, Delor, Cocherie, Rossi, Guerrot and Potrel2003; Klaver et al., Reference Klaver, De Roever, Nanne, Mason and Davies2015; Kroonenberg et al., Reference Kroonenberg and De Roever2015). The Nassau Mountain contains rocks from the Paramaka formation, which consists of metabasalts, metagabbro, meta-andesites, meta-cherts and other intermediate and felsic metavolcanic rocks (De Vletter, Reference De Vletter and De Vletter1984; De Vletter et al., Reference De Vletter, Aleva, Kroonenberg, Wong, De Vletter, Krook, Zonneveld and van Loon1998; Bárdossy & Aleva, Reference Bárdossy and Aleva1990).
The presence of pure bauxite in the midst of highly hematitic laterite was discovered in 1918 by Douglas and Beems (Doeve, unpub.). The deposit belongs to the Nassau bauxite district, which also includes other bauxite-laterite-covered high plateaus (Brownsberg, Wintiwaai and Lely Mountains) in eastern Suriname (Bárdossy & Aleva Reference Bárdossy and Aleva1990, and references therein). These mountains are tentatively attributed to an early Tertiary surface (King et al., unpub.).
It has been estimated that the Nassau deposit contains about 40 million dry tonnes of bauxite, most of which is located in c. 1.7 m thick lateritic deposits below an overburden with an average thickness of 1.5 m. The most promising mining areas are Plateaus A and C (Fig. 7). The Nassau deposit would be sufficient to supply the Paranam refinery with 4.2 million dry tonnes per year during 8 years (Van den Bergh, Reference Van den Bergh2011). Current obstacles to extract this deposit are the absence of infrastructure to transport the bauxite to Paranam, and environmental concerns about the presence of critically endangered endemic species of catfishes and frogs in these mountains (Ouboter et al., Reference Ouboter, Jairam, Wan Tong, Alonso and Mol2007; Alonso & Mol, Reference Alonso and Mol2007).
Comparison of Guiana Shield (Surinamese) and West African bauxite deposits
Large parts of South America and Africa are covered by a thick lateritic mantle (Tardy et al., Reference Tardy, Kobilsek and Paquet1991; Tardy, Reference Tardy1997; Fig. 8), which includes bauxites, ferricretes and nodular soils. The continents were separated in Cretaceous times during the break-up of Pangea (Pletsch et al., Reference Pletsch, Erbacher, Holborn, Kuhnt, Moullade, Oboh-Ikuenobede, Söding and Wagner2001). There are conspicuous similarities and differences between the Surinamese and West African bauxite deposits.
Distribution of bauxite in South America and Africa (depicted in blue) since Jurassic times (modified after Tardy et al., Reference Tardy, Kobilsek and Paquet1991). The location of Suriname is highlighted in red.
Similarities and differences between Surinamese and West African bauxites
-
1 Most bauxites on both sides of the Atlantic are Paleocene–Eocene–Oligocene in age (Prasad, Reference Prasad1983; Bárdossy & Aleva, Reference Bárdossy and Aleva1990; Théveniaut & Freyssinet, Reference Théveniaut and Freyssinet2002; Chardon et al., Reference Chardon, Chevilotte, Beauvais, Grandin and Boulangé2006) and formed during a bauxitisation phase when conditions were favourable worldwide (Fig. 9).
Fig. 9.Periods of worldwide lateritic bauxite formation (Bárdossy & Aleva, Reference Bárdossy and Aleva1990).
-
2 In both cases the bauxites are related to planation surfaces, in Suriname to the Main Aluminous Laterite Level (Fig. 3B) and in West Africa to the African Level (King et al., unpub.; Aleva, Reference Aleva1994; Wong et al., Reference Wong, Krook, Zonneveld, Wong, de Vletter, Krook, Zonneveld and van Loon1998).
-
3 The plateau bauxites of Suriname and most of the West African countries have a metamorphic Proterozic parent rock (Prasad, Reference Prasad1983; Mutakyahwa et al., Reference Mutakyahwa, Ikingura and Mruma2003; Chardon et al., Reference Chardon, Chevilotte, Beauvais, Grandin and Boulangé2006).
-
4 An important difference is the mineralogical signature of the bauxites, as the Surinamese bauxites are dominantly gibbsitic with traces of boehmite in some deposits (e.g. in the Nassau deposit), while the West African bauxites are also characterised by high gibbsite contents but generally have higher boehmite contents (Fig. 10). The boehmite content in the West African bauxite deposits increases northwards towards the warmer and more arid conditions of the Sahara (Tardy et al., Reference Tardy, Kobilsek and Paquet1991).
Fig. 10.Mineralogical composition of the West African bauxites (based on data from Tardy, Reference Tardy1997).
-
5 Mineralogical changes from gibbsite and goethite into boehmite and hematite are accompanied by the formation of nodular and pisolitic structures and induration of ferricretes and bauxites (Bárdossy & Aleva, Reference Bárdossy and Aleva1990; Tardy et al., Reference Tardy, Kobilsek and Paquet1991). This explains the frequent pisolitic texture of the West African bauxites compared to the generally massive texture of the Surinamese bauxites.
Climate control on bauxite distribution and mineralogy
The most favourable climatic conditions for bauxite formation are in tropical to humid subtropical zones with a mean annual temperature higher than 20°C, a mean annual rainfall of more than 1700 mm and less than 4 months of dry season, which are currently located in a latitudinal belt approximately between 300°N and 300°S (McFarlane, Reference McFarlane, Goudi and Pye1983; Valeton, Reference Valeton1983; Bárdossy & Aleva, Reference Bárdossy and Aleva1990). Bauxite deposits worldwide have formed in hot and humid (paleo-)tropical or (paleo-)equatorial regions since Devonian times (Valeton, Reference Valeton1972; Patterson et al., Reference Patterson, Kurtz, Olson and Neeley1986; Bárdossy & Aleva, Reference Bárdossy and Aleva1990; Tardy et al., Reference Tardy, Kobilsek and Paquet1991; Tardy, Reference Tardy1997). Bauxites have been retained on separate fragments of post-Gondwanan surface in South America, Africa and India, i.e. in the present hot and humid tropical zone (Prasad, Reference Prasad1983).
West African bauxites in humid zones (Guinea, Nigeria and Cameroon) and in drier areas (Burkina Faso) are considered to have formed during Jurassic, Cretaceous or Eocene times, when conditions were generally more humid than today (Tardy et al., Reference Tardy, Kobilsek and Paquet1991).
Contrasting chemical, mineralogical and textural characteristics of laterites on the African and South American continents can be attributed to latitudinal differences in present-day climates as well as to separate paleoclimatic histories since the opening of the Atlantic Ocean (Tardy et al., Reference Tardy, Kobilsek and Paquet1991). From Jurassic to present times, the previously arid climates of South America became progressively more humid whilst the formerly humid climates of West Africa progressively became more arid. In Africa the development of ferricretes gradually decreased northwards, as humidity decreased. The Saharan influence increased and altitude increased. Fossil ferricretes occur in the Sahara, providing evidence for more humid ancient climates than today (Tardy et al., Reference Tardy, Kobilsek and Paquet1991 and references therein).
This mineralogical composition of bauxite can also be controlled by climate, as boehmite and hematite (dehydrated minerals) are often associated with relatively arid climates, while gibbsite and goethite (hydrated minerals) are related to constantly humid climates (Bárdossy & Aleva, Reference Bárdossy and Aleva1990; Tardy, Reference Tardy1997).
During the paleoclimatic history of West Africa, boehmite formation could be considered as secondary and contemporaneous to hematite (Tardy et al., Reference Tardy, Kobilsek and Paquet1991). In tropical climates with a marked dry season and relatively high temperatures, humidity is usually sufficient to induce a strong weathering during rainfall but the temporary aridity of the dry season results in dehydration of gibbsite and goethite into boehmite and hematite, respectively (Tardy et al., Reference Tardy, Kobilsek and Paquet1991; Tardy, Reference Tardy1997).
Bauxite and alumina production in Suriname and the economic outlook
Bauxite has been one of the most important sources of income for Suriname since 1930 (Aleva & Wong, Reference Aleva and Wong1998; www.bauxietinstituut.com). Bauxite was exported as a raw material till 1985, whereas the export of aluminum as an end product started in 1965 and ceased in 2000. The export of alumina, the intermediate refinery product of bauxite, also commenced in 1965 and ceased in 2015 (Fig. 11A). The leading geological commodities (alumina, gold and petroleum) contribute 95% to the total export and accounted for 35% of the country's revenues, making the Surinamese economy highly vulnerable to market price volatility (Fig. 11A). The bauxite sector in Suriname lost its position as the main foreign exchange earner in 2004. Mining activities were significantly affected by the global economic recession that started in 2008. Bauxite revenues declined (Fig. 11B) following a drop in alumina demand and market prices (Central Bank of Suriname (www.cbvs.sr), 2015).
A. Real total export of commodities and real gross domestic product of Suriname, 1960–2010. B. Mining export between 2007 and 2013 expressed in millions of US dollars. Modified from Hoefdraad, G., Reference Hoefdraad2014.
Most of the bauxite deposits were discovered during the early 1950s when the Surinamese government carried out extensive exploration programmes across the country. Other Surinamese bauxite deposits that had already been discovered have not been mined to date because ore grade and other economic parameters did not allow a profitable extraction. These unexploited bauxite deposits have a total reserve of 580 Mt (www.bauxietinstituut.com; Lee Bray, Reference Lee Bray2015).
The future economic potential of bauxite in Suriname is uncertain and will be determined by the quality and size of the reserves, geological conditions, available production technology, targeted locations in relation to transport facilities, world market price and political factors. Existing Surinamese bauxite deposits have not been mined yet for different reasons. The Coermotibo deposit has not been economically attractive due to the high sulfur content in the bauxite and the 40-m thick overburden. The heterogeneous properties of the bauxite within the Bakhuis and Nassau bauxite deposits will make it necessary to drill a very close-spaced grid for mine planning. The remote location of the Nassau Mountains is also an economic and strategic problem. Political and economic factors have hampered mining of the Bakhuis deposit. A final and most sensitive obstacle is the environmental impact, as the Nassau Mountains have a unique flora and fauna, including critically endangered endemic species (Ouboter et al., Reference Ouboter, Jairam, Wan Tong, Alonso and Mol2007; Bánki et al., Reference Bánki, Ter Steege, Jansen-Jacobs and Raghoenandan2008; Alonso & Mol, Reference Alonso and Mol2007).
Concluding remarks
The lateritic bauxites of Suriname are derived from a variety of sedimentary and crystalline parent rocks. A diversity of geological conditions has yielded a multitude of bauxite deposits with variable quality, grade and accessibility, which are scattered across Cenozoic sediments of the coastal lowlands and Precambrian basement rocks of the interior highlands. During a century-long mining history and associated refining operations, the country became one of the world's leading producers of bauxite, alumina and aluminum. The Al-based mineral commodities were a central pillar of Suriname's economy for many decades. At present, the high-grade deposits of the coastal lowlands are virtually mined out and significant reserves are restricted to occurrences in the more remote highlands. Despite a continuous growth of the annual global production of primary aluminum in recent years, Suriname's production of alumina is currently in decline, largely due to unfavourable economic conditions. The future of the bauxite industry in Suriname is therefore uncertain.
Acknowledgements
This work was supported by the Suriname Environmental and Mining Foundation (SEMIF).The author would like to thank Manfred van Bergen and two anonymous reviewers for their valuable comments and suggestions to improve this manuscript.
Websites
www.alcoa.com (accessed 15 January 2014)
www.bauxietinstituut.com (accessed 20 October 2014)
www.cbvs.sr (accessed 11 March 2015)
www.staatolie.com (accessed 17 December 2014)
