Choosing the LAI dose

The dose equivalence of oral to LAI antipsychotic formulations is well defined for some but not all of the LAI options. Choosing the appropriate LAI dose is best accomplished by understanding the current extent of medication exposure—in other words, by obtaining plasma antipsychotic levels.Reference Meyer and Stahl¹⁷ Prior to switching to an LAI, plasma antipsychotic levels should be obtained as 12-hour morning trough values for oral medications at steady state.Reference Meyer and Stahl¹⁷ If antipsychotic plasma levels are low, repeating the trough plasma level can help determine whether this is due to an adherence issue or a pharmacokinetic one: fluctuations of more than 30% typically represent poor adherence, assuming the levels were drawn at comparable times.Reference Meyer and Stahl¹⁷

Initial dosing

When converting from an oral antipsychotic to an LAI, for most formulations, one must either adequately load the dose or provide oral supplementation. A loading dose is the dose required to immediately achieve a plasma concentration that is equivalent to the steady-state concentration.Reference Meyer and Stahl¹⁷ Dose loading is possible for many but not all of the available LAI formulations; when not available, oral supplementation is required. The failure to adequately load the dose or provide oral supplementation can lead to subtherapeutic antipsychotic plasma levels for weeks or months.

Maintenance dosing

Obtaining antipsychotic plasma levels can be beneficial not only for initiating the dosing of an LAI, but also during maintenance treatment. Because plasma antipsychotic levels increase gradually over time, dose requirements may eventually decrease, making it valuable, when possible, to obtain periodic plasma levels to prevent unnecessary plasma level creep. The appropriate time to get a blood level for patients receiving an LAI is the morning of the day they will receive their next injection; however, levels can be obtained up to 72 hours prior to the next injection.Reference Meyer and Stahl¹⁷

Risperidone microspheres: Consta and Rykindo

Risperidone microspheres are administered intramuscularly. The lag time in active release means that maximum concentration is not achieved until 14–17 days for Rykindo and 21 days for Consta.Reference Ereshefsky and Mascarenas³² However, the terminal half-life with multiple doses is 3 to 6 days, which is why these LAIs need to be dosed every 2 weeks.^{28, 29} Steady state is achieved after 4 injections, at 6 weeks.

Risperidone microspheres cannot be loaded, so oral supplementation is required to maintain therapeutic plasma levels (Table 1). Consta requires 21 days of oral overlap, while Rykindo requires 7 days of oral coverage.^{28, 29} Plasma concentrations can be estimated as approximately 7 times the oral dose, which can in turn be used to predict the appropriate long-acting dose (Table 2).Reference Meyer and Stahl¹⁷ For example, a 2-mg oral dose should correspond to an active moiety plasma level of approximately 14 ng/mL, which in turn corresponds to 25 mg of risperidone microspheres. However, this is an average and can vary by individual patient, so obtaining plasma levels is ideal when deciding on the maintenance dose of the LAI formulation.

The usual maintenance dose range is 12.5–50 mg every 2 weeks, with 50 mg per vial as the highest available dosing option.^{28, 29} Changes in blood levels due to dosage changes (or missed dose) are not apparent for 3–4 weeks; if dose adjustments are needed after a patient has started risperidone microspheres, titration should occur at intervals of no less than 4 weeks.Reference Meyer and Stahl¹⁷ If a dose is missed by 2 or more weeks, then oral coverage while reinitiating injections may be necessary.

Risperidone subcutaneous: Uzedy

Although there are two approved subcutaneous risperidone formulations, one (Perseris) is no longer being marketed.^{30, 39} With the copolymer technology utilized for subcutaneous risperidone, the delivery system is applied as a liquid and hardens upon contact with bodily fluids.Reference Meyer and Stahl^{17, 30, 39} This allows for an initial release of the active drug that reaches therapeutic plasma levels within 24 hours, thus obviating the need for oral coverage or a second loading injection, followed by controlled release for up to 2 months.Reference Meyer and Stahl^{17, 30, 39}

The injection volumes are smaller than with the intramuscular formulations (typically less than 1 ml); this allows for less-invasive injection sites (abdominal or upper arm rather than gluteal or deltoid).Reference Meyer and Stahl^{17, 30} There are two absorption peaks: the first occurs within 6–24 hours due to an initial release of the active drug during the depot formation process.Reference Gomeni, Heidbreder, Fudala and Nasser^35–Reference Perlstein, Merenlender Wagner and Gomeni³⁸ The second occurs 8–14 days after the injection, with similar magnitude and at levels that approach steady state (Table 1).Reference Gomeni, Heidbreder, Fudala and Nasser^35–Reference Perlstein, Merenlender Wagner and Gomeni³⁸ Steady state is reached in 2 months.

Uzedy can be administered every month (50–125 mg) or every two months (100–250 mg) in either the abdomen or the upper arm.³⁰ The average exposure values over the dosing period are comparable for once-monthly and once every two months administration at corresponding doses.

1-month paliperidone palmitate (Invega Sustenna and Erzofri)

For patients switching from oral medication or who are not on active medication, the 1-month formulation of paliperidone palmitate can be loaded, with a standard loading schedule of 234 mg on day 1 and 156 mg on day 8, plus or minus 2 days (Sustenna).²⁴ In 2024, another formulation of 1-month paliperidone palmitate (Erzofri) was approved, which has a single initiation loading dose of 351 mg.²⁵ The initiation dose for either 1-month formulation must be administered in the deltoid muscle, as deltoid absorption is 28% greater than gluteal absorption. The maintenance dose should start 4 weeks after the second loading injection, but the dosing window is flexible and can vary by plus or minus 1 week.^{24, 25} Patients who are switching from an LAI antipsychotic do not require the 1-week dose initiation schedule and instead can receive the first injection of paliperidone palmitate in place of their next scheduled depot injection.

The maintenance dose of 1-month paliperidone palmitate is determined based on the oral dose (Table 3), although ideally plasma levels would be obtained. The therapeutic threshold is 20 ng/ml; point of utility is not well established for paliperidone, and instead, the risperidone level is generally used as the best guide.Reference Meyer and Stahl^17, Reference Schoretsanitis, Spina, Hiemke and de Leon⁴¹

Table 3.

Dose equivalence for paliperidone formulations^23–25, Reference Perlstein, Merenlender Wagner and Gomeni^{38, 39}

Three-month paliperidone palmitate (Invega Trinza)

Three-month paliperidone palmitate is only for patients who have received adequate treatment with 1-month paliperidone for at least 4 months.²⁶ The last 2 doses of 1-month paliperidone should ideally be the same dosage strength, so that a consistent maintenance dose is established prior to starting the 3-month formulation. The injection of 3-month paliperidone palmitate is given in place of the next-scheduled 1-month injection, with dosing based on the previous 1-month injection dose (Table 3). The dosing window is also flexible for the 3-month formulation, and it can be given up to 2 weeks before or after the 3-month time period. Dose adjustments can be made every 3 months if needed.

If a dose is missed for 4–9 months, a reinitiation schedule with the 1-month formulation must be followed (Table 4).²⁶ If more than 9 months has passed since the last dose, treatment must be reinitiated with the 1-month formulation according to its prescribing information;^{24, 25} patients can convert to the 3-month formulation once they have been adequately treated with the 1-month LAI for at least 4 months.

Table 4.

Reinitiation schedule for 3-month paliperidone palmitate (4–9 months since last dose)²⁶

Six-month paliperidone palmitate (Invega Hafyera)

The injection of the 6-month formulation of paliperidone palmitate is given in place of the next-scheduled 1-month or 3-month injection, with dosing based on the previous 1-month or 3-month product (Table 3).²⁷ When switching from the 1-month LAI, the last two 1-month doses should be the same dosage strength so that a consistent maintenance dose is established prior to starting the 6-month formulation. When switching from the 3-month LAI, the 6-month injection can be given up to 2 weeks before or after the next-scheduled 3-month dose. Dose adjustments can be made every 6 months if needed; response to an adjusted dose may not be apparent for multiple months.

Patients taking the 6-month formulation can receive their next injection up to 2 weeks before or 3 weeks after the next-scheduled 6-month dose. If more than 6 months and 3 weeks has passed since the last dose, reinitiation with 1-month Sustenna is necessary (Table 5).²⁷

Table 5.

Reinitiation schedule for 6-month paliperidone palmitate (at least 6 months and 3 weeks since last dose)²⁷

Aripiprazole monohydrate: Maintena and Asimtufii

Aripiprazole monohydrate is available in a 1-month (Maintena) and a 2-month (Asimtufii) formulation. Aripiprazole monohydrate is poorly soluble, resulting in slow and prolonged dissolution and absorption, with maximum concentration achieved after about a week with Maintena and after 28 days with Asimtufii.Reference Meyer and Stahl¹⁷ Until recently, it could not be loaded and thus required oral coverage for the first 14 days; however, it is now an option to use a 2-injection loading strategy in lieu of oral coverage (Table 1).^{15, 16}

The 1-day initiation of Maintena requires two separate 400-mg injections with a single oral dose of 20 mg aripiprazole. The other option is a 14-day initiation, which requires an initial injection of 400 mg along with 14 days of overlapping oral antipsychotic. The maintenance dosing schedule is typically 300 to 400 mg every 4 weeks.¹⁵ The maximum dose, 400 mg, is equivalent to 20 mg of oral aripiprazole, which generally corresponds to a plasma level in the 200s.^15, Reference Meyer and Stahl¹⁷ Steady state is achieved after 4 monthly injections. In the event of a missed dose (more than 5 weeks between doses if steady state is not yet achieved and more than 6 weeks between doses once steady state is achieved), it is necessary to restart treatment with either the 1-day initiation or the 14-day initiation.¹⁵

Asimtufii can be initiated in patients receiving oral antipsychotic. The 1-day initiation requires one injection of 960 mg Asimtufii, one injection of 400 mg Maintena, and a single oral dose of 20 mg aripiprazole. Alternatively, the 14-day initiation requires one initial injection of 960 mg Asimtufii and oral antipsychotic coverage for 14 days. When converting from Maintena to Asimtufii, a 960-mg Asimtufii injection should be administered in place of the next-scheduled Maintena injection.¹⁶

The maintenance dose of Asimtufii is 720 mg or 960 mg every 2 months. The dosing window is flexible, and the next injection can be given up to 2 weeks before or after the 2-month time period.¹⁶ If more than 14 weeks has elapsed between injections, it is necessary to restart treatment with either the 1-day initiation or the 14-day initiation.¹⁶

Aripiprazole monohydrate cannot be used with strong cytochrome 450 (CYP) 3A4 inducers and requires dose adjustment in the presence of CYP2D6 and CYP3A4 inhibitors, as well as in patients who are poor CYP2D6 metabolizers (Table 6).^{15, 16}

Table 6.

Dose adjustments for aripiprazole monohydrate due to CYP interactions^{15, 16}

Aripiprazole lauroxil: Aristada and Aristada Initio

Aripiprazole lauroxil is a prodrug formulation, which allows for the formation of crystals that dissolve slowly. Once the prodrug is released from the crystal, it is immediately cleaved by hydrolysis, releasing active aripiprazole that reaches maximum concentration after 44 to 50 days, with four monthly injections required to reach steady state.¹³ There are two options for how to initiate treatment: (1) oral coverage for the first 21 days or (2) use of the 675-mg single-dose initiation injection in combination with a 30-mg dose of oral aripiprazole (Table 1).¹⁴ The first maintenance aripiprazole lauroxil injection can be administered on the same day as the single-dose injection or up to 10 days later. One should avoid injecting both the single-dose injection and maintenance-dose injection into the same deltoid or gluteal muscle.¹⁴

The dosing equivalence of oral aripiprazole to aripiprazole lauroxil is well defined (Table 7).¹³

Table 7.

Dose equivalence for aripiprazole lauroxil¹³

Dose adjustments are needed in the presence of CYP2D6 inhibitors, CYP3A4 inhibitors, and CYP3A4 inducers (Table 8).¹³ However, dose adjustments are not possible for the single-dose injection, so this treatment initiation option should be avoided in patients who are known CYP2D6 poor metabolizers or who are taking strong CYP3A4 inhibitors, strong CYP2D6 inhibitors, or strong CYP3A4 inducers.¹⁴

Table 8.

Dose adjustments for aripiprazole lauroxil due to CYP interactions¹³