A database of hydrogen-deuterium exchange results has been compiled for proteins for which there are published rates of out-exchange in the native state, protection against exchange during folding, and out-exchange in partially folded forms. The question of whether the slow exchange core is the folding core (Woodward C, 1993, Trends Biochem Sci 18:359–360) is reexamined in a detailed comparison of the specific amide protons (NHs) and the elements of secondary structure on which they are located. For each pulsed exchange or competition experiment, probe NHs are shown explicitly; the large number and broad distribution of probe NHs support the validity of comparing out-exchange with pulsed-exchange/competition experiments. There is a strong tendency for the same elements of secondary structure to carry NHs most protected in the native state, NHs first protected during folding, and NHs most protected in partially folded species. There is not a one-to-one correspondence of individual NHs. Proteins for which there are published data for native state out-exchange and φ values are also reviewed. The elements of secondary structure containing the slowest exchanging NHs in native proteins tend to contain side chains with high φ values or be connected to a turn/loop with high φ values. A definition for a protein core is proposed, and the implications for protein folding are discussed. Apparently, during folding and in the native state, nonlocal interactions between core sequences are favored more than other possible nonlocal interactions. Other studies of partially folded bovine pancreatic trypsin inhibitor (Barbar E, Barany G, Woodward C, 1995, Biochemistry 34:11423–11434; Barber E, Hare M, Daragan V, Barany G, Woodward C, 1998, Biochemistry 37:7822–7833), suggest that developing cores have site-specific energy barriers between microstates, one disordered, and the other(s) more ordered.

We describe here an algorithm for distinguishing sequential from nonsequentially folding proteins. Several experiments have recently suggested that most of the proteins that are synthesized in the eukaryotic cell may fold sequentially. This proposed folding mechanism in vivo is particularly advantageous to the organism. In the absence of chaperones, the probability that a sequentially folding protein will misfold is reduced significantly. The problem we address here is devising a procedure that would differentiate between the two types of folding patterns. Footprints of sequential folding may be found in structures where consecutive fragments of the chain interact with each other. In such cases, the folding complexity may be viewed as being lower. On the other hand, higher folding complexity suggests that at least a portion of the polypeptide backbone folds back upon itself to form three-dimensional (3D) interactions with noncontiguous portion(s) of the chain. Hence, we look at the mechanism of folding of the molecule via analysis of its complexity, that is, through the 3D interactions formed by contiguous segments on the polypeptide chain. To computationally splice the structure into consecutively interacting fragments, we either cut it into compact hydrophobic folding units or into a set of hypothetical, transient, highly populated, contiguous fragments (“building blocks” of the structure). In sequential folding, successive building blocks interact with each other from the amino to the carboxy terminus of the polypeptide chain. Consequently, the results of the parsing differentiate between sequentially vs. nonsequentially folded chains. The automated assessment of the folding complexity provides insight into both the likelihood of misfolding and the kinetic folding rate of the given protein. In terms of the funnel free energy landscape theory, a protein that truly follows the mechanism of sequential folding, in principle, encounters smoother free energy barriers. A simple sequentially folded protein should, therefore, be less error prone and fold faster than a protein with a complex folding pattern.

The sequence of apamin, an 18 residue bee venom toxin, encloses all the information required for the correct disulfide-coupled folding into the cystine-stabilized α-helical motif. Three apamin analogs, each containing a pair of selenocysteine residues replacing the related cysteines, were synthesized to mimic the three possible apamin isomers with two crossed, parallel, or consecutive disulfides, respectively. Refolding experiments clearly revealed that the redox potential of selenocysteine prevails over the sequence encoded structural information for proper folding of apamin. Thus, selenocysteine can be used as a new device to generate productive and nonproductive folding intermediates of peptides and proteins. In fact, disulfides are selectively reduced in presence of the diselenide and the conformational features derived from these intermediates as well as from the three-dimensional (3D) structures of the selenocysteine-containing analogs with their nonnatural networks of diselenide/disulfide bridges allowed to gain further insight into the subtle driving forces for the correct folding of apamin that mainly derive from local conformational preferences.

Transient absorbance measurements following laser flash photolysis have been used to measure the rate constants for electron transfer (et) from reduced Anabaena ferredoxin (Fd) to wild-type and seven site-specific charge-reversal mutants of Anabaena ferredoxin:NADP+ reductase (FNR). These mutations have been designed to probe the importance of specific positively charged amino acid residues on the surface of the FNR molecule near the exposed edge of the FAD cofactor in the protein–protein interaction during et with Fd. The mutant proteins fall into two groups: overall, the K75E, R16E, and K72E mutants are most severely impaired in et, and the K138E, R264E, K290E, and K294E mutants are impaired to a lesser extent, although the degree of impairment varies with ionic strength. Binding constants for complex formation between the oxidized proteins and for the transient et complexes show that the severity of the alterations in et kinetics for the mutants correlate with decreased stabilities of the protein–protein complexes. Those mutated residues, which show the largest effects, are located in a region of the protein in which positive charge predominates, and charge reversals have large effects on the calculated local surface electrostatic potential. In contrast, K138, R264, K290, and K294 are located within or close to regions of intense negative potential, and therefore the introduction of additional negative charges have considerably smaller effects on the calculated surface potential. We attribute the relative changes in et kinetics and complex binding constants for these mutants to these characteristics of the surface charge distribution in FNR and conclude that the positively charged region of the FNR surface located in the vicinity of K75, R16, and K72 is especially important in the binding and orientation of Fd during electron transfer.

The urea-induced equilibrium unfolding of the α subunit of tryptophan synthase (αTS), a single domain α/β barrel protein, displays a stable intermediate at ∼3.2 M urea when monitored by absorbance and circular dichroism (CD) spectroscopy (Matthews CR, Crisanti MM, 1981, Biochemistry 20:784–792). The same experiment, monitored by one-dimensional proton NMR, shows another cooperative process between 5 and 9 M urea that involves His92 (Saab-Rincón G et al., 1993, Biochemistry 32:13981–13990). To further test and quantify the implied four-state model, N [rlarr ] I1 [rlarr ] I2 [rlarr ] U, the urea-induced equilibrium unfolding process was followed by tyrosine fluorescence total intensity, tyrosine fluorescence anisotropy and far-UV CD. All three techniques resolve the four stable states, and the transitions between them when the FL total intensity and CD spectroscopy data were analyzed by the singular value decomposition method. Relative to U, the stabilities of the N, I1, and I2 states are 15.4, 9.4, and 4.9 kcal mol−1, respectively. I2 partially buries one or more of the seven tyrosines with a noticeable restriction of their motion; it also recovers ∼6% of the native CD signal. This intermediate, which is known to be stabilized by the hydrophobic effect, appears to reflect the early coalescence of nonpolar side chains without significant organization of the backbone. I1 recovers an additional 43% of the CD signal, further sequesters tyrosine residues in nonpolar environments, and restricts their motion to an extent similar to N. The progressive development of a higher order structure as the denaturant concentration decreases implies a monotonic contraction in the ensemble of conformations that represent the U, I2, I1, and N states of αTS.

Using homology search, structure prediction, and structural characterization methods we show that the C-terminal domains of (1) netrins, (2) complement proteins C3, C4, C5, (3) secreted frizzled-related proteins, and (4) type I procollagen C-proteinase enhancer proteins (PCOLCEs) are homologous with the N-terminal domains of (5) tissue inhibitors of metalloproteinases (TIMPs). The proteins harboring this netrin module (NTR module) fulfill diverse biological roles ranging from axon guidance, regulation of Wnt signaling, to the control of the activity of metalloproteases. With the exception of TIMPs, it is not known at present what role the NTR modules play in these processes. In view of the fact that the NTR modules of TIMPs are involved in the inhibition of matrixin-type metalloproteases and that the NTR module of PCOLCEs is involved in the control of the activity of the astacin-type metalloprotease BMP1, it seems possible that interaction with metzincins could be a shared property of NTR modules and could be critical for the biological roles of the host proteins.

The contribution to the free energy of binding of each of the residues forming the binding site for a human IgG Fc fragment on the surface of the B1 domain of protein G was determined by alanine-scanning mutagenesis. The interface between these two proteins is atypical in that it is smaller than usual, polar in character, and involves two well-defined “knobs-into-holes” interactions. The bulk of the free energy of binding is contributed by three central residues, which make hydrogen bonds across the interface. Of these, the most critical interaction is formed by Glu27, which acts as a charged knob on the surface of the B1 domain, inserting into a polar hole on the Fc fragment. A single alanine mutation of this residue virtually abolishes stable complex formation. Formation of a stable interface between these two proteins is therefore dominated by a small, polar “hot spot.”

The structure and dynamics of the fatty acid binding cavity in I-FABP (rat intestinal fatty acid binding protein) were analyzed. In the crystal structure of apo I-FABP, the probe occupied cavity volume and surface are 539 ± 8 Å3 and 428 Å2, respectively (1.4 Å probe). A total of 31 residues contact the cavity with their side chains. The side-chain cavity surface is partitioned according to the residue type as follows: 36–39% hydrophobic, 21–25% hydrophilic, and 37–43% neutral or ambivalent. Thus, the cavity surface is neither like a typical protein interior core, nor is like a typical protein external surface. All hydrophilic residues that contact the cavity—with the exception of Asp74—are clustered on the one side of the cavity. The cavity appears to expand its hydrophobic surface upon fatty acid binding on the side opposite to this hydrophilic patch. In holo I-FABP the fatty acid chain interactions with the hydrophilic side chains are mediated by water molecules. Molecular dynamics (MD) simulation of fully solvated apo I-FABP showed global conformational changes of I-FABP, which resulted in a large, but seemingly transient, exposure of the cavity to the external solvent. The packing density of the side chains lining the cavity, studied by Voronoi volumes, showed the presence of two distinctive small hydrophobic cores. The MD simulation predicts significant structural perturbations of the cavity on the subnanosecond time scale, which are capable of facilitating exchange of I-FABP internal water.

Lipidation catalyzed by protein prenyltransferases is essential for the biological function of a number of eukaryotic proteins, many of which are involved in signal transduction and vesicular traffic regulation. Sequence similarity searches reveal that the α-subunit of protein prenyltransferases (PTα) is a member of the tetratricopeptide repeat (TPR) superfamily. This finding makes the three-dimensional structure of the rat protein farnesyltransferase the first structural model of a TPR protein interacting with its protein partner. Structural comparison of the two TPR domains in protein farnesyltransferase and protein phosphatase 5 indicates that variation in TPR consensus residues may affect protein binding specificity through altering the overall shape of the TPR superhelix. A general approach to evolutionary analysis of proteins with repetitive sequence motifs has been developed and applied to the protein prenyltransferases and other TPR proteins. The results suggest that all members in PTα family originated from a common multirepeat ancestor, while the common ancestor of PTα and other members of TPR superfamily is likely to be a single repeat protein.

Although it is usually possible to achieve a favorable yield of a recombinant protein in Escherichia coli, obtaining the protein in a soluble, biologically active form continues to be a major challenge. Sometimes this problem can be overcome by fusing an aggregation-prone polypeptide to a highly soluble partner. To study this phenomenon in greater detail, we compared the ability of three soluble fusion partners—maltose-binding protein (MBP), glutathione S-transferase (GST), and thioredoxin (TRX)—to inhibit the aggregation of six diverse proteins that normally accumulate in an insoluble form. Remarkably, we found that MBP is a far more effective solubilizing agent than the other two fusion partners. Moreover, we demonstrated that in some cases fusion to MBP can promote the proper folding of the attached protein into its biologically active conformation. Thus, MBP seems to be capable of functioning as a general molecular chaperone in the context of a fusion protein. A model is proposed to explain how MBP promotes the solubility and influences the folding of its fusion partners.

The phage 434 Cro protein, the N-terminal domain of its repressor (R1–69) and that of phage λ (λ6–85) constitute a group of small, monomeric, single-domain folding units consisting of five helices with striking structural similarity. The intrinsic helix stabilities in λ6–85 have been correlated to its rapid folding behavior, and a residual hydrophobic cluster found in R1–69 in 7 M urea has been proposed as a folding initiation site. To understand the early events in the folding of 434 Cro, and for comparison with R1–69 and λ6–85, we examined the conformational behavior of five peptides covering the entire 434 Cro sequence in water, 40% (by volume) TFE/water, and 7 M urea solutions using CD and NMR. Each peptide corresponds to a helix and adjacent residues as identified in the native 434 Cro NMR and crystal structures. All are soluble and monomeric in the solution conditions examined except for the peptide corresponding to the 434 Cro helix 4, which has low water solubility. Helix formation is observed for the 434 Cro helix 1 and helix 2 peptides in water, for all the peptides in 40% TFE and for none in 7 M urea. NMR data indicate that the helix limits in the peptides are similar to those in the native protein helices. The number of side-chain NOEs in water and TFE correlates with the helix content, and essentially none are observed in 7 M urea for any peptide, except that for helix 5, where a hydrophobic cluster may be present. The low intrinsic folding propensities of the five helices could account for the observed stability and folding behavior of 434 Cro and is, at least qualitatively, in accord with the results of the recently described diffusion-collision model incorporating intrinsic helix propensities.

Maltose binding protein (MBP) is a large, monomeric two domain protein containing 370 amino acids. In the absence of denaturant at neutral pH, the protein is in the native state, while at pH 3.0 it forms a molten globule. The molten globule lacks a tertiary circular dichroism signal but has secondary structure similar to that of the native state. The molten globule binds 8-anilino-1-naphthalene sulfonate (ANS). The unfolding thermodynamics of MBP at both pHs were measured by carrying out a series of isothermal urea melts at temperatures ranging from 274–329 K. At 298 K, values of ΔG°, ΔCp, and Cm were 3.1 ± 0.2 kcal mol−1, 5.9 ± 0.8 kcal mol−1 K−1 (15.9 cal (mol-residue)−1 K−1), and 0.8 M, respectively, at pH 3.0 and 14.5 ± 0.4 kcal mol−1, 8.3 ± 0.7 kcal mol−1 K−1 (22.4 kcal (mol-residue)−1 K−1), and 3.3 M, respectively, at pH 7.1. Guanidine hydrochloride denaturation at pH 7.1 gave values of ΔG° and ΔCp similar to those obtained with urea. The m values for denaturation are strongly temperature dependent, in contrast to what has been previously observed for small globular proteins. The value of ΔCp per mol-residue for the molten globule is comparable to corresponding values of ΔCp for the unfolding of typical globular proteins and suggests that it is a highly ordered structure, unlike molten globules of many small proteins. The value of ΔCp per mol-residue for the unfolding of the native state is among the highest currently known for any protein.

Heterologous gene expression in either (1) the glycosylation-defective, mutant Chinese hamster ovary cell line, Lec3.2.8.1, or (2) the presence of the α-glucosidase inhibitor, N-butyldeoxynojirimycin facilitates the trimming of N-linked glycans of glycoproteins to single N-acetylglucosamine (GlcNAc) residues with endoglycosidase H (endo H). Both approaches are somewhat inefficient, however, with as little as 12% of the total protein being rendered fully endo H-sensitive under these conditions. It is shown here that the combined effects of these approaches on the restriction of oligosaccharide processing are essentially additive, thereby allowing the production of glycoproteins that are essentially completely endo H-sensitive. The preparation of a soluble chimeric form of CD58, the ligand of the human T-cell surface recognition molecule CD2, illustrates the usefulness of the combined approach when expression levels are low or the deglycosylated protein is unstable at low pH. The endo H-treated chimera produced crystals of space group P3121 or P3221, and unit cell dimensions a = b = 116.4 Å, c = 51.4 Å α = β = 90°, γ = 120°, that diffract to a maximum resolution of 1.8 Å.

The monomer–dimer equilibrium for the human immunodeficiency virus type 1 (HIV-1) protease has been investigated under physiological conditions. Dimer dissociation at pH 7.0 was correlated with a loss in β-sheet structure and a lower degree of ANS binding. An autolysis-resistant mutant, Q7K/L33I/L63I, was used to facilitate sedimentation equilibrium studies at neutral pH where the wild-type enzyme is typically unstable in the absence of bound inhibitor. The dimer dissociation constant (KD) of the triple mutant was 5.8 μM at pH 7.0 and was below the limit of measurement (∼100 nM) at pH 4.5. Similar studies using the catalytically inactive D25N mutant yielded a KD value of 1.0 μM at pH 7.0. These values differ significantly from a previously reported value of 23 nM obtained indirectly from inhibitor binding measurements (Darke et al., 1994). We show that the discrepancy may result from the thermodynamic linkage between the monomer–dimer and inhibitor binding equilibria. Under conditions where a significant degree of monomer is present, both substrates and competitive inhibitors will shift the equilibrium toward the dimer, resulting in apparent increases in dimer stability and decreases in ligand binding affinity. Sedimentation equilibrium studies were also carried out on several drug-resistant HIV-1 protease mutants: V82F, V82F/I84V, V82T/I84V, and L90M. All four mutants exhibited reduced dimer stability relative to the autolysis-resistant mutant at pH 7.0. Our results indicate that reductions in drug affinity may be due to the combined effects of mutations on both dimer stability and inhibitor binding.

Homologs of the tumor suppressor p53, called p63 and p73, have been identified. The p63 and p73 family members possess a domain structure similar to p53, but contain variable C-terminal extensions. We find that some of the C-terminal extensions contain Sterile Alpha Motif (SAM) domains. SAM domains are protein modules that are involved in protein–protein interactions. Consistent with this role, the C-terminal SAM domains of the p63 and p73 may regulate function by recruiting other protein effectors.

Ni2+ affinity columns are widely used for protein purification, but they carry the risk that Ni2+ ions may bind to the protein, either adventitiously or at a physiologically important site. Dialysis against ethylenediaminetetraacetic acid (EDTA) is normally used to remove metal ions bound adventitiously to proteins; however, this approach does not always work. Here we report that a bacterial endonuclease, the DNase domain of colicin E9, binds Ni2+ acquired from Ni2+ affinity columns, and appears to bind [Ni(EDTA)(H2O)n]2− at low ionic strength. NMR was used to detect the presence of both Ni2+ coordinated to amino acid side chains and [Ni(EDTA)(H2O)n]2−. Dialysis against ≥0.2 M NaCl was required to remove the [Ni(EDTA)(H2O)n]2−. The NMR procedure we have used to characterize the presence of Ni2+ and [Ni(EDTA)(H2O)n]2− should be applicable to other proteins where there is the possibility of binding paramagnetic metal ions that are present to expedite protein purification. In the present case, the binding of Ni2+ seems likely to be physiologically relevant, and the NMR data complement recent X-ray crystallographic evidence concerning the number of histidine ligands to bound Ni2+.

Computer analysis using profiles generated by the PSI-BLAST program identified a superfamily of proteins homologous to eukaryotic transglutaminases. The members of the new protein superfamily are found in all archaea, show a sporadic distribution among bacteria, and were detected also in eukaryotes, such as two yeast species and the nematode Caenorhabditis elegans. Sequence conservation in this superfamily primarily involves three motifs that center around conserved cysteine, histidine, and aspartate residues that form the catalytic triad in the structurally characterized transglutaminase, the human blood clotting factor XIIIa′. On the basis of the experimentally demonstrated activity of the Methanobacterium phage pseudomurein endoisopeptidase, it is proposed that many, if not all, microbial homologs of the transglutaminases are proteases and that the eukaryotic transglutaminases have evolved from an ancestral protease.

In the past decade or so, the universal dominance of l- over d-amino acids in living organisms has been questioned. This interesting and wide-ranging book summarizes the current state of knowledge on the occurrence, biosynthesis, and roles of d-amino acid containing peptides, with a strong emphasis on those in multicellular organisms. The opening chapter by Scaloni et al. provides a practical guide to the detection and analysis of d-amino acids. The subsequent four chapters describe studies related to the presence of d-amino acids in antimicrobial and opioid peptides in frogs, molluscan neuropeptides, and crustacean hyperglycemic hormones. Although the work could have been summarized more succinctly and there is, as is common with this type of text, some overlap between the chapters, the inclusion of experimental details will be of interest to the specialist.