2. Selected sample

2.2. Search for variable stars

As the first pilot tile to perform the search and analysis of binary system candidates, we selected tile d040 (upper panel of Figure 1) in the outermost Galactic disc region of the VVV Survey. This tile is centered at RA $_{2000}$ = $11^{\rm h} 58^{\rm m} 14.16^{\rm s}$ , DEC $_{2000}$ = $-62^{\circ} 48' 15.12''$ (Galactic coordinates l = $296.8962^{\circ}$ , b = $-0.5576^{\circ}$ ), covering a field of view of 1.64 square degrees (see Minniti et al. Reference Minniti2010, for the tile distribution and nomenclature). The extinction and reddening in tile d040 are comparatively lower than in the surrounding regions (A $_{K_s}$ = 0.62 $\pm$ 0.10 mag, E( $J-K_s$ ) = 0.86 $\pm$ 0.14), so tile d040 serves as a NIR window to search for previously ‘hidden’ objects (see, e.g., Minniti et al. Reference Minniti2018). Although the procedure for the detection of variables and the determination of light curves is explained in detail in Alonso-García et al. (2015a), we will briefly introduce it here.

Figure 1.

Upper panel: finding chart of VVV tile d040. Black filled circles represent the EB systems studied in this work, while the region below indicates the tile coloured by its star density. Lower panel: NIR CMD from the deep PSF photometry built with a procedure similar to Surot et al. (Reference Surot2019). The EBs are depicted with black filled circles, while the Hess diagram for the underlying population of the whole d040 tile is shown in colours. There is a clear predominance of disc main sequence stars, with a population of bright and red giants also visible in the upper right portion of the diagram.

Our first step in the search for variable stars consisted in performing a blind variability exam. Tile d040 includes $1.6 \times 10^6$ detected sources. Many of those sources with supposed light variations were pre-selected using Stetson variability statistics (Stetson Reference Stetson1996). As a result of applying this statistics, about 3 100 clearly variable stars were detected in the tile d040. As in Palma et al. (Reference Palma, Minniti, Dékány, Clariá, Alonso-García, Gramajo, Ramírez Alegría and Bonatto2016), we then subjected this first sample of observed variables to a frequency analysis. Two known algorithms were used to perform the signal detection: the Generalized Lomb-Scargle and the Phase Dispersion Minimization (GLS and PDM, respectively, Zechmeister & Kürster Reference Zechmeister and Kürster2009; Stellingwerf Reference Stellingwerf1978). Once the phase-folded light curves with their preliminary periods were obtained, such light curves were visually examined in order to choose the possible binary system candidates and to eliminate spurious signals. At this stage, about 400 EB candidates were chosen. Then, for this selected sample, we refined the periods iteratively to optimize the light curve fits by using a non-linear Fourier fit, with the first estimated periods obtained from the GLS and PDM analyses. We visually optimized for each source the number of the Fourier order. Finally, we obtained the corresponding light curves for the variable stars, their mean apparent $K_s$ magnitudes, and the total amplitudes in the $K_s$ -band. For full details of the applied procedure, see Alonso-García et al. (Reference Alonso-García, Dékány, Catelan, Contreras Ramos, Gran, Amigo, Leyton and Minniti2015b) and Palma et al. (Reference Palma, Minniti, Dékány, Clariá, Alonso-García, Gramajo, Ramírez Alegría and Bonatto2016).

Table 1.

Excerpt of basic parameters and solutions derived from the variability analysis for a hundred EB system candidates. The complete version of this table can been seen in the online version of this paper

^aParallaxes and their errors from Gaia-DR2.

^bDistance values from Bailer-Jones et al. (Reference Bailer-Jones, Rybizki, Fouesneau, Mantelet and Andrae2018).

2.3. Identification of eclipsing binary candidates

Visual inspection of the phased light curves enabled us to select a hundred good quality EB candidates. This selection was made by choosing those variables whose light curves exhibit a low or moderate point dispersion and those in which the two minima and a good portion of the maximum can be clearly distinguished. We present in Table 1 the selected sample of EB system candidates, together with some parameters associated with each object: equatorial coordinates (J2000), mean $K_s$ -band magnitudes, $J-K_s$ and $H-K_s$ colours, periods in days, $K_s$ -band amplitudes, parallaxes in arcsec from the Gaia-DR2 data, and the distance d in kpc from Bailer-Jones et al. (Reference Bailer-Jones, Rybizki, Fouesneau, Mantelet and Andrae2018). The last two parameters correspond only to the sources that we found in common with the Gaia-DR2 data. In our sample, we found 55 sources in common with Gaia-DR2 catalogue. However, only 40 of them have well-determined parallaxes. Table 1 is only partially presented here as guidance in its form and content. The complete version of the table can be found in the online version of this article. The lower panel of Figure 1 shows the colour-magnitude diagram (CMD) of VVV tile d040, along with the EBs selected for this study. Most of the EB system candidates appear to be located in the region of the main sequence stars, although a handful of them may be evolved red giant stars. As we can see from our sample, none of the detected EBs have mean Ks magnitudes fainter than 16 mag. This is due to the large photometric errors associated to the faintest stars, and thus interfere in the first detection made by Stetson index.

Our studied sources were matched with different variable catalogues, such as the ASAS-SN (Jayasinghe et al. Reference Jayasinghe2020b), the General Catalogue of Variable Stars (GCVS) (Samus’ et al. Reference Samus’, Kazarovets, Durlevich, Kireeva and Pastukhova2017), the Optical Gravitational Lensing Experiment (OGLE) (Soszyński et al. Reference Soszyński2016), the WISE variable (Chen et al. Reference Chen, Wang, Deng, de Grijs and Yang2018a), and CDS X-Match Service1.Footnote a We found a total of 19 stars in our sample that had been previously detected as variable stars (Table 2). Out of these, four were classified as $\beta$ Lyrae EBs candidates and eight as Algol and WUma systems. Finally, seven EBs were classified only as variables or unclassified correctly without a determined period. Table 2 also shows 12 stars classified as binary systems, with periods in agreement with the ones determined in this work (see Table 1).

Table 2.

Determined parameters for those EB candidates from our sample included in variable star catalogues

^aPeriod obtained by Jayasinghe et al. (Reference Jayasinghe2020b).

^bVariable Class determined by (Soszyński et al. Reference Soszyński2016), or Jayasinghe et al. (Reference Jayasinghe2020b), where are defined EA: Algol-type, EB: $\beta$ Lyrae and EW: W Ursae Majoris-type binaries, Var: Variable star, ROT: rotating variable star, SR: Semi-regular variable star.

References: (1) Jayasinghe et al. (Reference Jayasinghe2020b), (2) Kholopov (Reference Kholopov1987), (3) Duquennoy & Mayor (1981), (4) (Soszyński et al. Reference Soszyński2016).

3. Determination of physical and geometric parameters

Once we obtained the observed light curves of the new EB candidates as well as their final amplitudes and periods, we visually classified them as detached, semi-detached, or contact binary types, based on the shape of their light curves and on their Roche lobe overflows. Finally, we obtained 50 detached, 13 semi-detached, and 37 contact EBs. As expected, the number of contact and detached binary systems is higher than that of semi-detached ones (see, e.g., Paczyński et al. Reference Paczyński, Szczygieł, Pilecki and Pojmański2006). From the variety of currently available codes for binary system modelling, we opted for the PHysics Of Eclipsing BinariEs (PHOEBE 1.0, Prša & Zwitter Reference Prša and Zwitter2005) code, which is released under the GNU public license. This is a graphical front end to the Wilson-Devinney code (WD, Wilson Reference Wilson1994a, Reference Wilson1994b, Reference Wilson2001, Reference Wilson, Aerts and Sterken2006) that has proven to be a very useful tool for EBs analysis.

The PHOEBE code fits the light curves in two different steps: a subjective iteration (LC: Light Curve process) and an objective iteration (DC: Differencial Correction process). In the LC procedure, we can include all known parameters that can be obtained from the theory or observations (Wilson Reference Wilson1994a, Reference Wilson1994b, Reference Wilson2001, Reference Wilson, Aerts and Sterken2006), while the DC process is the differential calculus with which the physical and geometric parameters are better determined. This process permits to estimate the errors associated with parameters obtained from the light curves modelling. Then, we first analysed the light curves through the LC procedure using the period inferred from the Fourier analysis. The output of the LC procedure was then used as the input for the DC process.

To obtain the best-fitting light curve to the observed $K_s$ magnitude values in the LC procedure, we varied other physical parameters like the effective temperatures of the two components ( $T_1$ and $T_2$ ), the mass ratio q ( $M_2$ / $M_1$ ), the orbital inclination i of the system, where i = 90 $^{\circ}$ means that the observer lies in the plane of the orbit and the orbital eccentricity value. The relative size of the two components ( $R_1$ / $R_2$ ) must also be taken into account. This ratio, however, is not directly modelled but derived from the modelling of the other parameters. In order to model the light curves, it is necessary to assign initial values to the previously mentioned parameters (Prša & Zwitter Reference Prša and Zwitter2005).

After the first light curve model through the LC procedure was obtained, we applied the DC process through which physical parameters are derived. After some iterations, the best fit of the observed light curve was reached. The precision of the fit can be estimated by the $\chi^2$ value, which measures the discrepancy between the observational data and the adopted model. Next, within each iteration, the parameters resulting from each improved fit could be adopted. In every case, there had to be a visual inspection of the obtained results. In case no reasonable agreement was achieved, the corresponding parameters had to be properly changed before the next iteration was made. In some cases, when a wrong EB type was adopted, a final result could not be obtained. Once a possible final solution was achieved, we estimated the uncertainty associated with each of the obtained parameters. Although the WD method allows quite a good precision modelling for the parameters, the associated uncertainties increase in the number of variable parameters added in the process of modelling (see, e.g., (see, e.g., Prša & Zwitter Reference Prša and Zwitter2005).

Figure 2.

Modelling results for the system EBD040-026. The upper panel shows the best modelling fit with the parameters listed in Table 3. The middle panel displays the corresponding error dispersion. The bottom panel recreates the shape that the resulting system should have according to the obtained fundamental parameters.

In order to reach a converging solution, the input parameters should have a value fairly close to the final ones, i.e., the iteration process must be started using a reasonable value of the parameter to be modelled. To do so, we take as initial values of the period, the colour, and the mean $K_s$ magnitudes, those obtained from the analysis described in Section 2.3 (see Table 1). With these values, we build the NIR CMD of tile d040 (lower panel of Figure 1), from which it is possible to estimate an approximate spectral type or the initial value of an effective temperature of the EB candidates. In addition to the mentioned physical parameters, we also modelled the parameters such as the eccentricity and the orbital inclination of the system for which we adopted as initial values 0 $^{\circ}$ and 90 $^{\circ}$ , respectively. In general, we find that all types of EB light curves modelling show a high sensitivity to the mass ratio parameter, for which we had more caution in the modelling process.

Summing up, the light curve modelling using PHOEBE was performed by starting with the LC procedure trying to make the theoretical light curve fairly similar to the observed one. Then, in the following iterations, we visually inspected each fit and its corresponding parameters. The final solution is reached when $\chi^2$ is both low and stable, while the resulting parameters must have physical meaning. An example of the modelled results for the EBD040-026 system is shown in Figure 2. This figure exhibits the modelled results and also the dispersion of the errors and shape of the system according to the adopted parameters, respectively. Figures 3, 4, and 5 show the modelled results for some of the detached, semi-detached, and contact EBs, respectively.

The values derived from the modelling of ten of the studied systems are presented in Table 3, together with their associated errors. The complete table is available in the online version of the journal.

4. Analysis and discussion of results

We have modelled 100 EBs in the VVV tile d040, obtaining their physical and geometric parameters. This tile has a relatively lower reddening than its surroundings, i.e., we can see deeply into the Galactic plane (see, Minniti et al. Reference Minniti2018). The modelled EBs have mean NIR $K_s$ magnitudes in the range $11.2<K_s<15.6$ , with a mean light curve amplitude of 0.80 mag, and relatively short periods in the $0.4 < P $ (days) $< 15.2$ range. Figure 4 shows that most of the EBs present periods $P\sim 1.0$ days, the median period being $1.22$ days. Our EB distribution of the normalized period histogram, shown in the upper panel of Figure 4, turned out to be similar to the one obtained by North et al. (Reference North, Gauderon, Barblan and Royer2010) for the Small Magellanic Cloud, as well as to the distribution obtained by Paczyński et al. (Reference Paczyński, Szczygieł, Pilecki and Pojmański2006). North et al. (Reference North, Gauderon, Barblan and Royer2010) used radial velocity curves from the VLT and photometric light curves from OGLE, while Paczyński et al. (Reference Paczyński, Szczygieł, Pilecki and Pojmański2006) analysed a large sample discovered with ASAS. On the other hand, Soszyński et al. (Reference Soszyński2016) analysed OGLE data for a sample of $\sim450\,600$ eclipsing and ellipsoidal binaries in the Galactic bulge. They found a period distribution within a range of $0.05 < P $ (days) $< 26.00$ peaking at $0.4$ days, while our sample peaks at $P\sim 1.0$ day, with our lower limit (0.4 days) coinciding with the peak of Soszyński et al. (Reference Soszyński2016). Might this result suggest a difference between bulge and disc populations? Since we have only 100 EBs analysed homogeneously at the moment, we cannot reach a sound conclusion. In further studies, based on a statistically significant EB sample, we hope to address this question properly. We can see in the bottom panel of Figure 4 the corresponding cumulative period distributions of our studied EB sample. Such distribution varies according to the EB type, where in general contact binaries exhibit shorter periods, as expected, with a median value of 0.77 days. This value, however, is larger than one would expect for contact EBs, which may be due to a bias associated either with the tile or with the selection of the sample. Also, we classified two EBs (sources EBD040047 and EBD040062) as contact type that have a period larger than 5 days, with an observational error of $\sim0.02$ mag in Ks magnitudes and small amplitude ( $0.24$ and $0.32$ mag, respectively). In agreement with Jayasinghe et al. (Reference Jayasinghe2020b), we suggest that these two sources might be $\beta$ Lyrae type. For the detached and semi-detached EBs, we obtained values for the median period a bit higher (1.71 days and 1.41 days, respectively).

On the other hand, the modelling shows that eccentricity values are relatively small and that the orbits are preferentially circular. We found an average value of $\sim0.004$ , within the $0.00 < e < 0.04$ range. For the contact EBs, we derived a median value of the eccentricity of $e\sim 0.0027$ , as expected for short-period systems (see, e.g., Chen et al. Reference Chen, Deng, de Grijs, Wang and Feng2018b; Jayasinghe et al. Reference Jayasinghe2020b). For the detached and semi-detached EBs, we obtained eccentricities of $e\sim 0.0047$ and $e\sim 0.0058$ , respectively. Only two detached EBs, sources EBD040048 and EBD040083, were found to have relatively larger eccentricity values of $e\sim 0.041$ and $e\sim 0.032$ , respectively.

We analysed the relation among the parameters i, P, and e. The results can be seen in Figure 7. Contact EBs with small eccentricities have short to intermediate periods and inclinations lower than $80^{\circ}$ . Detached and semi-detached systems present inclinations higher than $70^{\circ}$ and periods distributed along the entire range, although the vast majority of them are shorter than 5 days. Moreover, sources with high eccentricity present inclinations of about $80^{\circ} - 90^{\circ}$ and periods between 1 and 5 days.

Table 3.

Excerpt of physical parameters for different types of studied EBs

^aEclipsing Binary class = D: detached, SD: semi-detached, C: contact.

Figure 3.

Modelled light curves of some of the detached EB candidates.

Figure 4.

Same as Figure 3 for six semi-detached EB candidates.

As we mention in Section 2, we matched our EB sample to other catalogues of variable stars and confirmed that 19 were previously observed. In general, the classification of these systems in other catalogues is similar to ours. In particular, our periods exhibit good agreement with those derived by Jayasinghe et al. (Reference Jayasinghe2020b). The mass ratio parameter of our total sample lies within the 0.30 $< q <$ 3.74 range. In order to detect any possible variations in the mass ratio value for different EB types, we included in Figure 5 the cumulative mass ratio distributions for our EB candidates. Note in this figure that the contact EBs present q values lower than 1, with a mean q value of $\sim0.44$ . However, if we consider the contact and semi-detached systems together, then the mean value of the mass ratio turns out to be q $\sim$ 0.53, i.e., a little lower than the one derived by North et al. (Reference North, Gauderon, Barblan and Royer2010). On the other hand, the semi-detached EBs present q values higher than 1, a tendency that may be due to a selection effect, i.e., which component of each EB is the mass donor.

Figure 5.

Same as Figure 3 for six contact EB candidates.

Other parameters that can be highlighted are the temperatures $T_1$ and $T_2$ of each component, also derived from the PHOEBE model. The upper panel of Figure 6 shows the temperature distribution of each component, with peaks at $\sim$ 5 800 and $\sim$ 4 000 K for $T_1$ and $T_2$ , their mean values being 5 700 and 4 900 K, respectively, typical of main sequence stars. The distribution of the temperature difference ( $T_1 - T_2$ ) derived for the EBs of our sample as a function of the light curve amplitude can be observed in the lower panel of Figure 6. Different colours indicate their corresponding inverted mass ratio values (1/q), whereas different symbols represent different types of EBs. Though no clear trend is observed in these distributions, the temperature difference in the contact EBs is, on average, smaller than in the detached systems (with a mean value of $\sim$ 700 and $\sim$ 1 300 K, respectively), while their amplitudes are almost all smaller than 1 mag. The sample of semi-detached EBs includes only 13 of them; however, it is noted that the temperature difference between the components covers almost entirely the temperature range with a mean value around $\sim$ 2 600 K. These systems present, in general, smaller values for the radii ratio. This means that the semi-detached EBs have almost similar radii even if they may have significant temperature differences in their respective components ( $\sim6\,000$ K). Such result could be explained if the different types of semi-detached EBs are taken into consideration. One example is the classification made by Malkov (Reference Malkov2020) in Hot SD, Classical Algols, and Cool SD, which also incorporates the possibility of having the inverted components parameters (mass, radius, luminosity) in a sample of 119 semi-detached EBs with the parameters photometrically and spectroscopically determined. However, we have to take into account that the errors associated with the determination of temperatures of our semi-detached sample increase with larger temperature differences.

Figure 6.

The upper panel shows the normalised period histogram of the studied EB sample, while the bottom panel presents its cumulative probability distribution. Subsamples of different types of EBs are represented by dashed lines of different colours: detached EBs in blue, semi-detached EBs in green, and contact EBs in red. The total sample is shaded in grey in the upper panel and represented by a grey dashed line in the bottom panel.

Figure 7.

Distribution of orbital inclinations as a function of the period for detached (open circles), semi-detached (boxes), and contact (filled triangles) EB candidates. Different colours represent the corresponding eccentricity.

Figure 8.

The cumulative distribution of the mass ratio q for the EB candidates. Different colours correspond to different subsamples, i.e., the complete sample (grey), detached EBs (blue), semi-detached EBs (green), and contact EBs (red). The obtained distributions show that contact EBs have q values lower than 1, while semi-detached binaries have mass ratios within a wide range of values. These results may depend on which component has filled its Roche lobe.

Figure 9.

Upper panel: Temperature distributions ( $T_1$ and $T_2$ ) derived for the EBs of the studied sample. Lower panel: Distribution of light curve amplitudes as a function of the temperature difference of the components. Symbol colours represent the corresponding EBs mass ratio values (1/q).

Figure 10.

Distance histograms for the studied EBs with known parallaxes from Gaia-DR2 (d1) and Bailer-Jones et al. (Reference Bailer-Jones, Rybizki, Fouesneau, Mantelet and Andrae2018). (d2).

Figure 10 shows the distance distribution measured by Gaia-DR2 (Gaia Collaboration et al. 2016, 2018), using the parallaxes listed in Table 1. We notice a wide distribution in distances, while the VVV EBs probe very deep into this region of the Galactic disc. The distances inferred directly by inverting Gaia-DR2 parallaxes (blue line histogram) have been included in this figure, as well as the Gaia distances corrected by Bailer-Jones et al. (Reference Bailer-Jones, Rybizki, Fouesneau, Mantelet and Andrae2018) in the shaded histogram. While the two distance distributions are not the same, the difference between them is small. These distances derived from Gaia parallaxes must be seen with caution, since the parallaxes errors of some of our sources are as large as the parallaxes measurements themselves (see Table 1). We derived $K_s$ absolute magnitudes of each EB from the Gaia-DR2 parallaxes by applying the corresponding corrections from Bailer-Jones et al. (Reference Bailer-Jones, Rybizki, Fouesneau, Mantelet and Andrae2018). These $K_s$ absolute magnitudes were used to analyse the P-L relation including a final sample of 40 sources. Out of these 40 sources, we have only 12 contact EBs for our analysis. A more thorough study of the P-L relation should take into account two possible EB groups: the early-type and the late-type contact EBs. The possibility of a contact binary belonging to one or the other group can be inferred from its location in the effective temperature vs. period (T-P) diagram. Nevertheless, once this T-P diagram was built, many systems of our sample could not be clearly placed in either group. This fact, together with the few EB candidates available for the analysis, did not allow us to reach a clear result for the P-L relationship. It is our aim to expand this study to different regions of the VVV so as to significantly increase the contact EB sample with which carry out a deeper and more reliable study of the P-L relation.

5. Summary and conclusions

We presented here the light curves and the determination of geometric and physical parameters for a sample of 100 EB system candidates projected on a NIR photometric window in the southern part of the Galactic disc. The EB sample was selected from the VVV database. The comparatively low reddening in the studied region allowed us to obtain precise and deep photometric measurements and light curves in the $K_s$ -band. Using the PHOEBE code, we calculated the physical and geometric parameters of the detected EBs. The total EB sample is found to be composed of 50 $\%$ detached, 13 $\%$ semi-detached, and 37 $\%$ contact binary systems. Their median period is $1.22$ days with an average $K_s$ amplitude of $0.8$ mag. The average period of our EB sample turned out to be higher than the one obtained in the bulge by Soszyński et al. (Reference Soszyński2016). Probably, this result may be associated to selection effects, e.g., different wavelengths in which the EBs were observed in the VVV and in the OGLE surveys, respectively. We derived the temperature distributions of each component, which peak at 5 800 and 4 000 K for $T_1$ and $T_2$ , respectively, with mean values of 5 700 and 4 900 K, typical of main sequence stars. In particular, we observed that the differences between the temperature components ( $T_1-T_2$ ) are, on average, smaller in the contact EBs than in the detached systems, while almost all of their respective Ks amplitudes are smaller than 1.0. The cross-matching with Gaia-DR2 data yielded a sample of 40 EBs and only 12 contact systems, so we hope to have a larger contact EB sample to perform a statistically significant study. This new Galactic disc sample is a first approach to the massive study of NIR EB systems. Larger samples of EB system candidates are currently under study, which could lead to a larger statistical EB sample. The method applied here for VVV tile d040 can indeed be used to analyse the remaining tiles of the VVV NIR Survey (196 tiles in the Galactic bulge and 152 in the disc), in which we expect to measure the parameters of thousands of still unknown EB stars. In addition, the future release of Gaia optical light curves for the objects in common with our sample would help to improve the accuracy of their parameters.