The aim of this study was to determine the in vitro digestibility and in sacco disappearance of dry matter (DM) and neutral detergent fibre (NDF) in total almond hulls (TAH), pure almond hulls (PAH) or Debris. The TAH were used because there are no data on the effect of debris (non-hull material) on the nutritional value of almond hulls. Twelve samples of commercial almond hulls were used, with one subsample representing the TAH and the other subsample hand sorted to separate the hulls (PAH) from Debris. Gas production and Ankom Daisy method were used to determine in vitro digestibility, while two rumen-fistulated cows were used to measure in sacco disappearance of PAH and TAH. For in vitro digestibility, both PAH and TAH were more digestible and had greater gas production than Debris. The PAH had greater in vitro true digestibility on a DM basis and NDF digestibility at 48 and 72 h compared with TAH. Nonpareil hulls provided greater metabolizable energy (ME) concentration when compared with other almond varieties, with PAH supplying numerically more ME than TAH for both varieties. For in sacco disappearance, PAH had greater DM and NDF disappearance along with a greater rate of disappearance for NDF compared with TAH. This research demonstrated that Debris is highly indigestible; therefore, hulling, agronomic and harvesting practices should be focused on reducing Debris in commercial almond hulls to improve their nutritive value as a feedstuff for livestock.

The Dark Energy Survey is undertaking an observational programme imaging 1/4 of the southern hemisphere sky with unprecedented photometric accuracy. In the process of observing millions of faint stars and galaxies to constrain the parameters of the dark energy equation of state, the Dark Energy Survey will obtain pre-discovery images of the regions surrounding an estimated 100 gamma-ray bursts over 5 yr. Once gamma-ray bursts are detected by, e.g., the Swift satellite, the DES data will be extremely useful for follow-up observations by the transient astronomy community. We describe a recently-commissioned suite of software that listens continuously for automated notices of gamma-ray burst activity, collates information from archival DES data, and disseminates relevant data products back to the community in near-real-time. Of particular importance are the opportunities that non-public DES data provide for relative photometry of the optical counterparts of gamma-ray bursts, as well as for identifying key characteristics (e.g., photometric redshifts) of potential gamma-ray burst host galaxies. We provide the functional details of the DESAlert software, and its data products, and we show sample results from the application of DESAlert to numerous previously detected gamma-ray bursts, including the possible identification of several heretofore unknown gamma-ray burst hosts.

A K-band (18-25 GHz) reflected-wave ruby maser (Moore and Clauss 1979) has been borrowed from the National Radio Astronomy Observatory for radio astronomy use on the NASA 64-m antenna of the Deep Space Network at the Tidbinbilla Tracking Station, near Canberra. The purpose of the installation is to provide additional sensitive spectral line, continuum, and VLBI capabilities in the southern hemisphere. Previous measurements at 22.3 GHz (λ = 13.5 mm) determined that the Tidbinbilla 64-m antenna has a peak aperture efficiency of ˜22%, a well-behaved beam shape and consistent pointing (Fourikis and Jauncey 1979). Before installing the maser on the antenna a cooled (circulator) switch was added to provide a beam-switching capability, and a spectral line receiver following the maser was incorporated. The system was assembled and tested at JPL in late 1980 and installed at Tidbinbilla early in 1981. We give here a brief description and present some of the first line observations made in February and March 1981. Extensive line and continuum observations are planned with the present system and a program is under way to determine the telescope pointing characteristics.

Young children readily acquire new words with consonants and syllable structures already used accurately (IN words). They have more difficulty acquiring new words with consonants or syllable structures never before produced or attempted (OUT words). In the present study, we examined children's acquisition of a third type of word, containing consonants the children had attempted in the past but never produced accurately (ATTEMPTED words). IN, OUT and ATTEMPTED words and their object referents were presented to 11 young children in a series of play sessions. The children's production and comprehension of the words were then assessed. No comprehension differences among the three types of words were observed. However, ATTEMPTED words as well as OUT words were less likely to be acquired in production than IN words. Some revisions in models of child phonology are proposed to accommodate these findings.

High hydrostatic pressure disruption of casein micelle isolates was studied by analytical ultracentrifugation and transmission electron microscopy. Casein micelles were isolated from skim milk and subjected to combinations of thermal treatment (85°C, 20 min) and high hydrostatic pressure (up to 676 MPa) with and without whey protein added. High hydrostatic pressure promoted extensive disruption of the casein micelles in the 250 to 310 MPa pressure range. At pressures greater than 310 MPa no further disruption was observed. The addition of whey protein to casein micelle isolates protected the micelles from high hydrostatic pressure induced disruption only when the mix was thermally processed before pressure treatment. The more whey protein was added (up to 5 g/l) the more the protection against high hydrostatic pressure induced micelle disruption was observed in thermally treated samples subjected to 310 MPa.

We report here a procedure for the functioalization of SiO2-coated, SiONx waveguides for biological assays. Surface functionalization occurs by self-assembly of an amine-terminated silane monolayer on the waveguide, followed by partial chemical modification with functionalized polyethylene glycol (PEG) groups. Functionalized surfaces were characterized by atomic force microscopy and contact angle measurements. When combined with a BSA blocking step, these functional PEG surfaces significantly reduced non-specific binding and allowed for specific binding to occur. An antibody sandwich assay for detection of Bacillus anthracis protective antigen was used to validate these surfaces for sensing applications.

The efficiency of part lactation test day (TD) records in first parity for the genetic evaluation of bulls and cows using a random regression model (RRM) and a fixed regression model (FRM) was studied, modelling the random and fixed lactation curves by Legendre polynomials. The data set consisted of 9 242 783 TD records for first lactation milk yield of 1 134 042 Holstein Friesian heifers. The efficiency of both models with part lactation TD records was examined by comparing predicted transmitting abilities (PTAs) for 305-day milk yield for 114 bulls and their 4697 daughters, from analyses where the maximum number of TD records of these daughters was restricted to the initial 2, 4 or 6 TDs with those estimated from 10 TDs. The correlations of PTAs estimated from 2, 4 or 6 TDs with those from 10 TDs computed for cows and bulls within each model were very similar. A rank correlation of 0·91 (0·92 FRM) was obtained for cows between PTAs based on 2 TDs and those from 10 TDs. The correlation increased to 0·96 with 4 TDs and 0·98 with 6 TDs. For bulls, correlations between PTAs estimated from 4 or 6 TDs with those estimated from 10 TDs were high at 0·98 and 0·99 respectively. With 2 TDs, the correlation was 0·95. The average under-prediction of PTAs with 2, 4 or 6 TDs relative to 10 TDs was generally higher and more variable with a FRM compared with a RRM for highly persistent cows and bulls. A similar trend was observed for mean over-prediction of PTAs, except for the initial predictions based on 2 TDs when the RRM gave a higher mean over-prediction for bulls and their daughters with low persistency but high initial TD records. The range of over and under-predictions were large (up to 200 kg milk) for some bulls when only 2 TDs were included in both models. A moderate correlation of 0·64 was obtained between persistency evaluations estimated from 10 TDs with those estimated from 2 TDs. The correlation increased to 0·71 with 4 TDs included and 0·85 with 6 TDs. The moderately high correlation between 6 TDs and 10 TDs of 0·85 was unexpected given the high correlation of 0·99 between PTAs for yield estimated from 6TDs with those estimated from 10 TDs.

Genetic evaluations in the United Kingdom (UK) for Somatic Cell Count (SCC) are currently based on a single trait repeatability model using the first five lactations. Only cows with completed lactations are included. However, to utilise information from cows with part lactation records and to achieve a better correction for environmental effects, a test day model (TDM) evaluation would be preferred. The objective of this study is to estimate genetic parameters needed for such a TDM evaluation by utilising a random regression (RR) approach.

Longevity or lifespan has proved to be an important trait when it comes to profitability for the dairy farmer. Selecting for longer herdlife not only reduces the replacement rate and thereby the replacement cost, but also gives the opportunity to cull for low production (as opposed to health problems) and increases the milk yield through a higher proportion of mature cows in the herd. Predicted Transmitting Abilities (PTA's) for LS are calculated from a bivariate analysis including indirect information in the form of a phenotypic index of four linear type traits (fore udder attachment, foot angle, udder depth and teat length) closely related to longevity, and from direct lactation information, i.e. survival measured in number of lactations corrected for milk yield (Brotherstone et al., 1998). Genetic evaluations for LS were introduced in the United Kingdom (UK) in August 1998 (Mrode et al., 1999).

The Animal Data Centre (ADC) is responsible for producing linear type evaluations for the Ayrshire, Shorthorn, Jersey, Guernsey, Jersey Island and Guernsey Island breeds. Along with publication of breeding values (BV's), it is important to provide farmers and organisations in the industry with information on genetic trends in conformation to establish the effect of selection and determine future selection strategies. As selection goals in conformation are not as clear as in production traits, it is important to analyse each trait to find out how breeds are developing. The objective of the study was therefore to analyse linear type evaluations in order to determine the trends in the traits classified.

Somatic cell count (SCO data collected on individual cows since 1991 were obtained from National Milk Records. Following validation genetic and phenotypic parameters were estimated from the lactation average SCCfor 63 424 Holstein/Friesian (HOD, 7966 Ayrshire (AYR) and 14 509 Jersey (JER) animals. The first three lactations were included in the analyses. The heritabilities (h2) for first lactation log SCC (LSCC) were 0·11 (s.e. 0·01), 0·12 (s.e. 0·02) and 0·09 (s.e. 0·03) for the HOL, JER and AYR breeds respectively. Estimates for herd sire interaction (c2) effects ranged from 0·01 to 0·02. Analysis of the first three lactations with a repeatability model produced similar h2 and c2 estimates. Permanent environment estimates ranged from 0·21 to 0·25. Heritabilities of individual test day LSCC ranged from 0·04 (s.e. 0·02) to 0·10 (s.e. 0·03). Genetic correlations between SCC and milk, fat and protein yield for the HOL breed were 0·06 (s.e. 0·05), 0·14 (s.e. 0·06) and 0·09 (s.e. 0·06) respectively. Genetic evaluations were obtained for 666 595 and 9136 animals for Holsteins and Ayrshires, providing evaluations on 13 525 and 1713 bulls respectively in each breed. The range of LSCC predicted transmitting abilities (PTA) was ±25% although the proportion of bulls with reliability > 0·50 was low at 0·17 and 0-05 for HOL and AYR respectively. The correlations between the LSCC PTAs for HOL bulls with at least 50 daughters and their genetic evaluations for linear type were essentially zero for body and some udder traits. Significant negative correlations were obtained for a number of traits including foot angle (0·14), fore-udder attachment (0·19) and udder depth (0·19) and a positive correlation for teat length (0·15). SCC evaluations will be implemented by the Animal Data Centre. Reliabilities will be lower than production because of the lower h2 for SCC and the lower progeny group size since only 0·80 of recorded cows have SCC records.

It is important for the dairy industry to be aware of the consequences of past selection policies. This can provide guidance on how to improve or change current breeding schemes. In addition it is important to know how much of current progress is due to breeding and how much to management. The objective of the study was to analyse genetic and phenotypic trends for the production traits (milk, fat and protein) using the results from the latest UK Individual Animal Model evaluations.

This new architectural class of macromolecules has received substantial attention during the past decade. Three dendritic subclasses, which include (a) random hyperbranched (i.e., one-pot ABx, polymerizations), (b) dendritic grafted (i.e., Combburst® polymers) and (c) regular dendrons/dendrimers (e.g., Starburst® dendrimers) have been synthesized and characterized at a well-defined level in our laboratory. It is clear that their precisely controlled, nanoscale dimensions and architecture play critical roles in influencing physical properties and performance characteristics. Furthermore, these parameters have also distinguished dendrimers as fundamental modules for many nanotechnology applications, as well as for the construction of a new class of larger nanoscale entities which we have termed core-shell tecto(dendrimers). This account will overview these activities and focus on certain unique de Gennes dense packing (or congestion phenomena) and nanoscale container properties that have emerged from this novel architecture.

Countries, which import a significant amount of semen, embryos and animals, are faced with the problem of how properly to evaluate the animals in the national evaluation system when information on the foreign parents is generally missing. Additional problems arise when the foreign parents obtain an evaluation, usually on the basis of progeny, in the country of import with the result that there are two published evaluations for the animals in question. This paper presents a post-iterative method of incorporating foreign information into home country evaluations. The foreign information is initially converted to the same scale and base as in the home country using procedures recommended by the International Bull Evaluation Service. The method consists essentially of calculating a combined evaluation for animals with home and foreign information as a weighted average of yield deviations, parent averages and progeny contributions from the foreign and home countries. The combined evaluations are used to adjust the evaluations of progeny on the basis of formulae derived from the usual mixed model equations. The same principles were used to combine reliabilities from the respective home and foreign reliabilities. The results from the application of the method to the United Kingdom (UK) Holstein Friesian population are presented. There was re-ranking of both bulls and cows, especially foreign bulls with few UK daughters.

Mastitis is one of the most costly health problems of dairy cattle. Herd average somatic cell counts (SCC) have been measured and used since 1977 as a means of identifying high levels of mastitis in herds. Although good management is an effective means of reducing mastitis the costs and penalties introduced in payment schemes, for high cell counts, has focused attention on breeding to reduce the incidence of mastitis through indirect selection for lower SCC. Optional, individual cow SCC recording commenced in 1991 and approximately 0.80 of all cows are now recorded. This paper presents the results of SCC evaluations for three dairy breeds.

Mastitis constitutes a major source of economic loss in the national dairy herd. Although good management practices can produce a major reduction in mastitis, there is considerable interest in the reduction of mastitis through breeding. Somatic cell counts (SCC) have been used as a way of indirectly measuring sub-clinical mastitis within a herd. Since 1991, average cell count is obtained for all herds and this is used to adjust milk payments.

Milk recording organisations introduced a cow cell count service in 1990. The data are now available for the preliminary analysis of the usefulness of somatic cell counts. The objective of this study was to estimate genetic parameters for SCC for three major breeds in the UK.

Monolithic Nb5Si3 films and microlaminates consisting of alternating, equally thick layers of Nb and Nb5Si3 were synthesized by magnetron sputtering. Thick monolithic Nb5Si3 films (25,000 nm) were deposited on a sapphire substrate to set process parameters and evaluate the microstructure and mechanical properties of as-deposited crystalline films. Nb5Si3/Nb micro-laminates with modulation wavelengths (i.e., bilayer thickness) of 40 and 200 nm were deposited on Nb substrates. Mechanical properties (elastic modulus, microhardness, compressive yield strength) of the films and microlaminates were studied using the nanoindentation method and Vickers microhardness. Mechanical property test results are presented.

The temperature and field dependence of the de Haas-van Alphen oscillations in θ- (BEDT-TTF)2l3 is analyzed. The cyclotron masses are estimated to be 2.0 Me and 3.6 me for slow and fast oscillations, respectively. The indication of magnetic breakdown effect is discussed in terms of the geometry of the Fermi surface. The results are compared with those of the infrared reflectance spectra.

Observations of Shubnikov-de Haas(SdH) and de Haas-van Alphen(dHvA) oscillations in organic metals (BEDT-TTF)2X, with X=KHg(SCN)4, θ-I3 and β″-AuBr2. are reported. In KHg(SCN)4 salt, in addition to the SdH oscillations with fundamental frequency of 670 T corresponding to about 16% of the first Brillouin zone(FBZ), we observed splitting of each SdH peak which we ascribed to “spin-splitting” We have also found that the ground state of this salt is not a simple metal but has some magnetic character. In θ-l3 salt we have succeeded in an observation of dHvA oscillations for the first time. We observed a “saw-tooth” dHvA oscillation characteristic to a highly two-dimensional and extraordinary clean electronic system. In addition to the fundamental frequency of 4170 T corresponding to 50.4 % of the FBZ and its higher harmonics, we observed an oscillation with lower frequency of 730 T corresponding to about 8.8 % of the FBZ. A new Fermi surface topology for θ-l3 salt is proposed based on the analysis of the dHvA effect. In β″-AuBr2, we observed complex dHvA oscillations, which can be explained in terms of the mixing of two fundamental frequencies of 47 and 268 T, suggesting the presence of very small pockets corresponding to 0.6 and 2.9 % of the FBZ.