Poor posture is a significant concern due to its detrimental effects on health and productivity. This article presents a collar-clipped device called PostureClip, designed to restrict users from sitting and working at a bent angle, by blacking out the screen and resuming on correcting posture, thereby promoting better posture. The device integrates sensors and feedback mechanisms to provide real-time posture feedback to users. To evaluate the effectiveness of PostureClip, a controlled experiment was conducted with participants (n = 165) who were working on a laptop/PC for over 6 hours per day. The participants were randomly assigned to both the intervention group (IG1, n = 54; IG2, n = 55), which used the collar-clipped device, and the control group (CG, n = 56), which did not use the device. IG1 did not get feedback, while IG2 got feedback from the device by notifying and further darkening the screen. The study was conducted in the office environment of the participants, for 4 weeks, and metrics such as posture angle, duration of bent angle, and user feedback were collected. Analysis revealed significant improvements in posture angle (p < .001) and a significant reduction in bent angle duration (p < .01) for the participants’ group using PostureClip with feedback and compared to the group without feedback and the control group (who were not intervened). The qualitative analysis of user feedback highlighted the device’s ease of use, effectiveness in providing timely feedback, and positive impact on participants’ awareness and habits regarding posture. These results indicate that PostureClip is an effective tool for promoting better posture during sedentary work.

Accurate estimation of finger joint stiffness is important in assessing the hand condition of stroke patients and developing effective rehabilitation plans. Recent technological advances have enabled the efficient performance of hand therapy and assessment by estimating joint stiffness using soft actuators. While joint modular soft actuators have enabled cost-effective and personalized stiffness estimation, existing approaches face limitations. A corrective approach based on an analytical model suffers from actuator–finger and inter-actuator interactions, particularly in multi-joint systems. In contrast, a data-driven approach struggles with generalization due to limited availability of labeled data. In this study, we proposed a method for energy conservation-based online tuning of the analytical model using an artificial neural network (ANN) to address these challenges. By analyzing each term in the analytical model, we identified causes of estimation error and introduced correction parameters that satisfy energy balance within the actuator–finger complex. The ANN enhances the analytical model’s adaptability to measurement data, thereby improving estimation accuracy. The results show that our method outperforms the conventional corrective approach and exhibits better generalization potential than the purely data-driven approach. In addition, the method also proved effective in estimating stiffness in human subjects, where errors tend to be larger than in prototype experiments. This study is an essential step toward the realization of personalized rehabilitation.

Lightweight, adjustable, and affordable devices are needed to enable the next generation of effective, wearable adjuncts for rehabilitation. Used at home or in a rehabilitation setting, these devices have the potential to reduce compound pressures on hospitals and social care systems. Despite recent developments in soft wearable robots, many of these devices restrict the range of motion and lack quantitative assessment of moment transfer to the wearer. The decoupled design of our wearable device for upper-limb rehabilitation successfully delivers almost the full range of motion to the user, with a mean maximum flexion angle of 149° (SD = 8.5). In this article, for the first time, we show that in tests involving a wide range of participants, 82% of the moment produced by the actuator is applied to the wearer. This testing of elbow flexion moment transfer supports the effectiveness of the device. This research is a step toward effective pneumatic soft robotic wearable devices that are adaptable to a wide range of users – a necessary prerequisite for their widespread adoption in health care.

State-of-the-art controllers for active back exosuits rely on body kinematics and state machines. These controllers do not continuously target the lumbosacral compression forces or adapt to unknown external loads. The use of additional contact or load detection could make such controllers more adaptive; however, it can be impractical for daily use. Here, we developed a novel neuro-mechanical model-based controller (NMBC) that uses a personalized electromyography (EMG)-driven musculoskeletal (MSK) model to estimate lumbosacral joint loading. NMBC provided adaptive, subject- and load-specific assistive forces proportional to estimates of the active part of biological joint moments through a soft back support exosuit. Without a priori information, the maximum assistive forces of the cable were modulated across weights. Simultaneously, we applied a non-adaptive, kinematic-dependent, trunk inclination-based controller (TIBC). Both NMBC and TIBC reduced the mean and peak biomechanical metrics, although not all reductions were significant. TIBC did not modulate assistance across weights. NMBC showed larger reductions of mean than peak values, significant reductions during the erect stance and the cumulative compressive loads by 21% over multiple cycles in a cohort of 10 participants. Overall, NMBC targeted mean lumbosacral compressive forces during lifting without a priori information of the load being carried. This may facilitate the adoption of non-hindering wearable robotics in real-life scenarios. As NMBC is informed by an EMG-driven MSK model, it is possible to tune the timing of NMBC-generated torque commands to the exosuit (delaying or anticipating commands with respect to biological torques) to target further reduction of peak or mean compressive forces and muscle fatigue.

Real-time measurement of head rotation, a primary human body movement, offers potential advantages in rehabilitating head or neck motor disorders, promoting seamless human–robot interaction, and tracking the lateral glance of children with autism spectrum disorder for effective intervention. However, existing options such as cameras capturing the entire face or skin-attached sensors have limitations concerning privacy, safety, and/or usability. This research introduces a novel method that employs a battery-free RFID tag-based wearable sensor for monitoring head orientation, as a substitute for the existing options like camera. By attaching a pair of passive RFID tags to the front of the head at a specific distance from each other, the signal strength of each tag within the pair differs based on the discrepancy in distance from the RFID reader caused by head rotation. Important parameters including distance between the tags, distance from the reader, and tag types, are investigated to suggest optimal sensor design. In tests involving random head rotations by 10 healthy adults, there was a significant correlation between the orientation of the head and gaze in the yaw direction and the differences in signal strength from the sensor pairs. The correlation coefficients ($ {r}^2 $) were satisfactory, at 0.88 for head and 0.83 for left eye pupil orientations. However, the sensor failed to estimate pitch rotations for head and gaze, due to the insufficient vertical spacing between the tags. No demographic factors appeared to influence the results.

Sensorized insoles provide a tool for gait studies and health monitoring during daily life. For users to accept such insoles, they need to be comfortable and lightweight. Previous research has demonstrated that sensorized insoles can estimate ground reaction forces (GRFs). However, these insoles often assemble commercial components restricting design freedom and customization. Within this work, we incorporated four 3D-printed soft foam-like sensors to sensorize an insole. To test the insoles, we had nine participants walk on an instrumented treadmill. The four sensors behaved in line with the expected change in pressure distribution during the gait cycle. A subset of this data was used to identify personalized Hammerstein–Wiener (HW) models to estimate the 3D GRFs while the others were used for validation. In addition, the identified HW models showed the best estimation performance (on average root mean squared (RMS) error 9.3%, $ {R}^2 $=0.85 and mean absolute error (MAE) 7%) of the vertical, mediolateral, and anteroposterior GRFs, thereby showing that these sensors can estimate the resulting 3D force reasonably well. These results were comparable to or outperformed other works that used commercial force-sensing resistors with machine learning. Four participants participated in three trials over a week, which showed a decrease in estimation performance over time but stayed on average 11.35% RMS and 8.6% MAE after a week with the performance seeming consistent between days two and seven. These results show promise for using 3D-printed soft piezoresistive foam-like sensors with system identification regarding the viability for applications that require softness, lightweight, and customization such as wearable (force) sensors.

Cable-driven exosuits have the potential to support individuals with motor disabilities across the continuum of care. When supporting a limb with a cable, force sensors are often used to measure tension. However, force sensors add cost, complexity, and distal components. This paper presents a design and control approach to remove the force sensor from an upper limb cable-driven exosuit. A mechanical design for the exosuit was developed to maximize passive transparency. Then, a data-driven friction identification was conducted on a mannequin test bench to design a model-based tension controller. Seventeen healthy participants raised and lowered their right arms to evaluate tension tracking, movement quality, and muscular effort. Questionnaires on discomfort, physical exertion, and fatigue were collected. The proposed strategy allowed tracking the desired assistive torque with a root mean square error of 0.71 Nm (18%) at 50% gravity support. During the raising phase, the electromyography signals of the anterior deltoid, trapezius, and pectoralis major were reduced on average compared to the no-suit condition by 30, 38, and 38%, respectively. The posterior deltoid activity was increased by 32% during lowering. Position tracking was not significantly altered, whereas movement smoothness significantly decreased. This work demonstrates the feasibility and effectiveness of removing the force sensor from a cable-driven exosuit. A significant increase in discomfort in the lower neck and right shoulder indicated that the ergonomics of the suit could be improved. Overall this work paves the way toward simpler and more affordable exosuits.

Stroke causes neurological and physical impairment in millions of people around the world every year. To better comprehend the upper-limb needs and challenges stroke survivors face and the issues associated with existing technology and formulate ideas for a technological solution, the authors conversed with 153 members of the ecosystem (60 neuro patients, 30 caregivers, and 63 medical providers). Patients fell into two populations depending on their upper-limb impairment: spastic (stiff, clenched hands) and flaccid (limp hands). For this work, the authors chose to focus on the second category and developed a set of design constraints based on the information collected through customer discovery. With these in mind, they designed and prototyped a 3D-printed powered wrist–hand grasping orthosis (exoskeleton) to aid in recovery. The orthosis is easily custom-sized based on two parameters and derived anatomical relationships. The researchers tested the prototype on a survivor of stroke and modeled the kinematic behavior of the orthosis with and without load. The prototype neared or exceeded the target design constraints and was able to grasp objects consistently and stably, as well as exercise the patients’ hands. In particular, donning time was only 42 s, as compared to the next fastest time of 3 min reported in literature. This device has the potential for effective neurorehabilitation in a home setting, and it lays the foundation for clinical trials and further device development.

The development of wearable technology, which enables motion tracking analysis for human movement outside the laboratory, can improve awareness of personal health and performance. This study used a wearable smart sock prototype to track foot–ankle kinematics during gait movement. Multivariable linear regression and two deep learning models, including long short-term memory (LSTM) and convolutional neural networks, were trained to estimate the joint angles in sagittal and frontal planes measured by an optical motion capture system. Participant-specific models were established for ten healthy subjects walking on a treadmill. The prototype was tested at various walking speeds to assess its ability to track movements for multiple speeds and generalize models for estimating joint angles in sagittal and frontal planes. LSTM outperformed other models with lower mean absolute error (MAE), lower root mean squared error, and higher R-squared values. The average MAE score was less than 1.138° and 0.939° in sagittal and frontal planes, respectively, when training models for each speed and 2.15° and 1.14° when trained and evaluated for all speeds. These results indicate wearable smart socks to generalize foot–ankle kinematics over various walking speeds with relatively low error and could consequently be used to measure gait parameters without the need for a lab-constricted motion capture system.