Hostname: page-component-89b8bd64d-dvtzq Total loading time: 0 Render date: 2026-05-13T22:18:53.420Z Has data issue: false hasContentIssue false
  • English
  • Français

Vapor Transport Deposition and Characterization of Polycrystalline CdTe Solar Absorbers

Published online by Cambridge University Press:  01 February 2011

James M. Kestner ,
Sarah McElvain ,
Colin A. Wolden ,
Stephen Kelly ,
Tim R. Ohno ,
Lawrence M. Woods  and
Rosine Ribelin
James M. Kestner
Affiliation:
Departments of Chemical Engineering
Sarah McElvain
Affiliation:
Departments of Chemical Engineering
Colin A. Wolden
Affiliation:
Departments of Chemical Engineering
Stephen Kelly
Affiliation:
Physics, Colorado School of Mines, Golden, CO80401, U.S.A.
Tim R. Ohno
Affiliation:
Physics, Colorado School of Mines, Golden, CO80401, U.S.A.
Lawrence M. Woods
Affiliation:
ITN Energy Systems, 8130 Shaffer Parkway, Littleton, CO 80127-4107, U.S.A.
Rosine Ribelin
Affiliation:
ITN Energy Systems, 8130 Shaffer Parkway, Littleton, CO 80127-4107, U.S.A.
Get access

Abstract

Vapor transport deposition is being developed for high-rate synthesis of CdTe thin films. Films have been deposited at rates in excess of 20 μm/min. Thegrowth ratedependenceon source temperature yielded an apparent activation energy of 42 kcal/mol, in good agreement with the theoretical value for CdTe sublimation (45.7 kcal/mol). For substrate temperatures greater than 400°C the rate limiting step was resublimation. This phenomenon had a dramatic influence on morphology, although x-ray diffraction of all films indicated a strong (111) orientation. A preliminary device optimization investigating the effect of CdTe deposition temperature, post-deposition CdCl2 anneal parameters, alternative back contacts, and high-resistance buffer layers yielded a best cell with efficiency of 9.8% (704 mV Voc, 21.0mA/cm2 Jsc, 66% FF).

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 763: Symposium B – Compound Semiconductor Photovoltaics , 2003 , B5.22
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1. Ferekides, C. and Britt, J., ‘Thin-film CdS/CdTe Solar Cell with 15.8% Efficiency,’. Applied Physics Letters, 1993. 62(22), p. 2851–2852.Google Scholar
2. Ohyama, H., Aramoto, T., Kumanzawa, S., Higuchi, H., Arita, T., Shibutani, S., Nishio, T., Nakajima, J., Tsuji, M., Hanafusa, A., Hibino, T., Omura, K., and Morozono, M., ‘16.0% Efficient Thin-Film CdS/CdTe Solar Cells,’ Proceedings of the 26th IEEE Photovoltaic Specialists' Conference, 1997, Anaheim, CA, p. 343–346.Google Scholar
3. Rose, D., Powell, R., Jayamaha, U., Maltby, M., Giolando, D., McMaster, A., Kormanyos, K., Faykosh, G., Klopping, J., and Dorer, G., ‘R&D of CdTe-Absorber Photovoltaic Cells, Modules, and Manufacturing Equipment: Plan and Progress to 100 MW/Yr,’ Proceedings of the 28th IEEE Photovoltaic Specialists' Conference, 2000, Anchorage, AK, p.428–431.Google Scholar
4. Brebrick, R.F. and Strauss, A.J., ‘Partial Pressures and Gibbs Free Energy of Formation for Congruently Subliming CdTe(c),’ Journal of Physical Chemistry of Solids, 1964, 25, p. 1441–1445.Google Scholar