Skip to main content
  • Get access
    Check if you have access via personal or institutional login
  • Cited by 54
  • Cited by
    This chapter has been cited by the following publications. This list is generated based on data provided by CrossRef.

    Wu, Liang Gong, Ming and Wang, Jingtao 2018. Development of a DEM–VOF Model for the Turbulent Free-Surface Flows with Particles and Its Application to Stirred Mixing System. Industrial & Engineering Chemistry Research, Vol. 57, Issue. 5, p. 1714.

    Lau, Albert Wan, Chang Løhren, Alf Helge and Hoff, Inge 2018. A Methodology for Switch and Crossing Optimization. p. 964.

    Kumar, Rohit Sarkar, Avik Ketterhagen, William Hancock, Bruno Curtis, Jennifer and Wassgren, Carl 2018. Influence of normal contact force model on simulations of spherocylindrical particles. AIChE Journal, Vol. 64, Issue. 6, p. 1986.

    Gangotra, Ankita and Willmott, Geoff R. 2018. Reference Module in Materials Science and Materials Engineering.

    Wada, Yusuke Sekido, Nobuaki Ohmura, Takahito and Yoshimi, Kyosuke 2018. Effect of Indentation Orientation on the Onset of Plastic Deformation for a MAX Phase Ti<sub>2</sub>AlC. Journal of the Japan Institute of Metals and Materials, Vol. 82, Issue. 5, p. 162.

    Blais, Bruno Bertrand, Olivier Fradette, Louis and Bertrand, François 2017. CFD-DEM simulations of early turbulent solid–liquid mixing: Prediction of suspension curve and just-suspended speed. Chemical Engineering Research and Design, Vol. 123, Issue. , p. 388.

    Toy, Virginia G. Niemeijer, André Renard, Francois Morales, Luiz and Wirth, Richard 2017. Striation and slickenline development on quartz fault surfaces at crustal conditions: Origin and effect on friction. Journal of Geophysical Research: Solid Earth, Vol. 122, Issue. 5, p. 3497.

    Wang, Chunjin Wang, Zhenzhong Wang, Quanjin Ke, Xiaolong Zhong, Bo Guo, Yinbiao and Xu, Qiao 2017. Improved semirigid bonnet tool for high-efficiency polishing on large aspheric optics. The International Journal of Advanced Manufacturing Technology, Vol. 88, Issue. 5-8, p. 1607.

    Meuwissen, Marcel Ruiten, Jippe Van Besseling, Thijs van Sluijs, Robbert Broda, Maik Pearce, Brian and O'Shea, Fenton I. 2017. Lowering Friction in Timing Chain Drive Systems by Tuning Tensioner Materials. SAE International Journal of Fuels and Lubricants, Vol. 10, Issue. 1, p. 22.

    Renard, François and Candela, Thibault 2017. Fault Zone Dynamic Processes. p. 195.

    Alaci, S Ciornei, F C Amarandei, D Irimescu, L Romanu, I C and Rotar, M A 2017. The effect of transport velocity upon spin torque. IOP Conference Series: Materials Science and Engineering, Vol. 174, Issue. , p. 012008.

    Liu, Hao Fujinami, So Wang, Dong Nakajima, Ken and Nishi, Toshio 2016. Polymer Morphology. p. 317.

    Jun, Chul-Woong Sohn, Jeong-Hyun and Park, Sung-Ho 2016. Effect analysis of design parameter of trawl door by considering interaction with seabed. International Journal of Precision Engineering and Manufacturing, Vol. 17, Issue. 11, p. 1515.

    Zhang, Wenjie Liu, Geng Tong, Ruiting and Ma, Shangjun 2016. Load distribution of planetary roller screw mechanism and its improvement approach. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 230, Issue. 18, p. 3304.

    2015. Measurement of Soft Tissue Elasticity in Vivo. p. 163.

    Lee, H. Noh, E. Ohm, W.-S. and Kwon, O.-C. 2015. Derivation of the nonlinearity parameter B/A of saturated, unconsolidated marine sediments via a statistical approach. Vol. 1685, Issue. , p. 030001.

    Wang, GenWei 2014. Radial deformation and adhesion of carbon nanotube. Science China Physics, Mechanics & Astronomy, Vol. 57, Issue. 8, p. 1569.

    Choi, Ha-Young Park, Seungchan and Lee, Jongsoo 2014. Optimal doctor blade design considering contact stress and toner properties. International Journal of Precision Engineering and Manufacturing, Vol. 15, Issue. 5, p. 849.

    Kanth, Neel Ray, A. K. and Riti 2014. Mathematical model to investigate the effect of design and process parameters on nip width of supercalender. International Journal of Modeling, Simulation, and Scientific Computing, Vol. 05, Issue. 04, p. 1450020.

    Vahdat, Vahid Grierson, David S. Turner, Kevin T. and Carpick, Robert W. 2013. Mechanics of Interaction and Atomic-Scale Wear of Amplitude Modulation Atomic Force Microscopy Probes. ACS Nano, Vol. 7, Issue. 4, p. 3221.

  • Print publication year: 1985
  • Online publication date: June 2012

4 - Normal contact of elastic solids – Hertz theory

Recommend this book

Email your librarian or administrator to recommend adding this book to your organisation's collection.

Contact Mechanics
  • Online ISBN: 9781139171731
  • Book DOI:
Please enter your name
Please enter a valid email address
Who would you like to send this to *