Skip to main content Accessibility help
×
Hostname: page-component-7c8c6479df-xxrs7 Total loading time: 0 Render date: 2024-03-27T17:52:11.638Z Has data issue: false hasContentIssue false

2 - Models and Preliminaries

Published online by Cambridge University Press:  03 November 2016

Thomas L. Marzetta
Affiliation:
Bell Labs, Nokia
Erik G. Larsson
Affiliation:
Linköpings Universitet, Sweden
Hong Yang
Affiliation:
Bell Labs, Nokia
Hien Quoc Ngo
Affiliation:
Queen's University Belfast
Get access

Summary

This chapter introduces the basic signal and channel models to be used throughout the book. We use standard complex baseband representations of all signals and noise, with the implicit assumption that all signals are eventually modulated onto a carrier with frequency fc and wavelength λ = c/fc, where c is the speed of light. Also, unless stated explicitly, all Gaussian random variables are complex-valued and circularly symmetric; see Appendix A for a treatment of such variables.

Single-Antenna Transmitter and Single-Antenna Receiver

The wireless channel takes an input signal x(t), emitted by a transmit antenna, and yields an output signal y(t), observed at a receive antenna. The relation between x(t) and y(t) is linear, owing to the linearity of Maxwell's equations. However, this relation generally is timevarying, since the transmitter, receiver, and other objects in the propagation environment may move relative to one another.

Coherence Time

The time during which the channel can be reasonably well viewed as time-invariant is called the coherence time and denoted by Tc (measured in seconds). To relate Tc to the characteristics of the physical propagation environment, we consider a simple two-path propagation model where a transmit antenna emits a signal x(t) that reaches the receiver both directly via a LoS path, and via a single specular reflection; see Figure 2.1(a). If both paths have unit strength, and the bandwidth of x(t) is small enough that time-delays can be

approximated as phase shifts, then by the superposition principle the received signal is

where d1 and d2 are the propagation path lengths defined in Figure 2.1(a).

Suppose, for the sake of argument, that when the receiver is located as shown in Figure 2.1(a), d1/λ and d2/λ are integers. Then the two paths add up constructively and y(t) = 2x(t). Next, if the receiver is displaced d meters to the right, so that we have the situation in Figure 2.1(b), the received signal will instead be

The two paths add up destructively if the cosine in (2.2) is equal to zero. As shown in Figure 2.2(a), this occurs periodically for displacements d that are spaced λ/2 meters apart. The channel may be considered time-invariant as long as the receiver does not move farther than this distance, λ/2.

Type
Chapter
Information
Publisher: Cambridge University Press
Print publication year: 2016

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Save book to Kindle

To save this book to your Kindle, first ensure coreplatform@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about saving to your Kindle.

Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.

Find out more about the Kindle Personal Document Service.

Available formats
×

Save book to Dropbox

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Dropbox.

Available formats
×

Save book to Google Drive

To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Google Drive.

Available formats
×