from Part III - Network Protocols, Algorithms, and Design
Published online by Cambridge University Press: 28 April 2017
Introduction
The spectrum between 30 and 300 GHz is referred to as the millimeter wave (mmWave) band because the wavelengths for these frequencies are in the range from about one to ten millimeters. The Federal Communications Commission (FCC) has allocated the 57–64 GHz mmWave band for general unlicensed use, opening the door to supporting high data rate wireless applications over the 7 GHz unlicensed band. Given the spectrum deficiency and network densification of cellular systems, how to use the mmWave band to support various machine/human-to-machine/human communications is critically important for fifth generation (5G) cellular systems.
Millimeter wave can be applied to both outdoor and indoor wireless communications. mmWave together with massive multiple-input multiple-output (MIMO) is a promising candidate for 5G outdoor transmission, as discussed in Chapter 15. For indoor uses, mmWave communication has many salient features, listed below, and it is highly desirable for 5G femtocell communications. This chapter focuses on the indoor femtocell scenario.
First, mmWave can achieve very high data rates (up to multi-Gbps), so it can enable many killer applications such as high-definition and interactive streaming services, and the Internet of Things. These applications require not only a high data rate but also stringent quality-of-service (QoS) requirements in terms of delay, jitter, and loss. Second, mmWave can coexist well with other wireless communication systems, such as the existing cellular systems, Wi-Fi (IEEE 802.11), and ultra-wideband (UWB) systems, because of the large frequency difference. Third, oxygen absorption has its peak at 60 GHz, so the transmission and interference ranges of mmWave communication are small, which allows very dense deployment of mmWave-based femtocells. In addition, the fact that the mmWave signal degrades significantly when passing through walls and over distance is helpful for ensuring security of the content.
The special channel characteristics and features of mmWave communication pose new challenges regarding how to coordinate mmWave transmissions to achieve high spatial reuse and guarantee the QoS. In the following, given the unique characteristics of mmWave communications and of the appropriate multiplexing technologies and network architectures for mmWave-based femtocells, we discuss the key opportunities and challenges in resource management of mmWave-based wireless networks, and introduce an appropriate scheduling solution to explore the spatial multiplexing gain in mmWave networks.
To save this book to your Kindle, first ensure no-reply@cambridge.org is added to your Approved Personal Document E-mail List under your Personal Document Settings on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part of your Kindle email address below. Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations. ‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi. ‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
Find out more about the Kindle Personal Document Service.
To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Dropbox.
To save content items to your account, please confirm that you agree to abide by our usage policies. If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account. Find out more about saving content to Google Drive.