Hostname: page-component-848d4c4894-ndmmz Total loading time: 0 Render date: 2024-05-14T17:28:07.680Z Has data issue: false hasContentIssue false

A dual-band filtenna with improved gain using AMC for 5G sub-6 GHz applications

Published online by Cambridge University Press:  09 June 2022

I. Suryarajitha
Affiliation:
Department of Electronics & Communication Engineering, Indian Institute of Technology, Roorkee, Uttarakhand, India
Ruchi
Affiliation:
Department of Electronics & Communication Engineering, Indian Institute of Technology, Roorkee, Uttarakhand, India
R. K. Panigrahi
Affiliation:
Department of Electronics & Communication Engineering, Indian Institute of Technology, Roorkee, Uttarakhand, India
M. V. Kartikeyan*
Affiliation:
Department of Electronics & Communication Engineering, Indian Institute of Technology, Roorkee, Uttarakhand, India Department of Electrical Engineering, Indian Institute of Technology, Tirupati, Andhra Pradesh, India
*
Author for correspondence: M. V. Kartikeyan, E-mail: kartik@ieee.org

Abstract

A gain enhanced dual-band filtenna operating at frequency bands of 3.5 and 5.3 GHz for 5G sub-6 GHz applications is presented in this article. A dual-band antenna is integrated with a filter to improve selectivity. The antenna uses printed monopoles as the radiating element, and the filtering response is achieved using a modified feedline. The designed filtenna is 50 × 38 × 1.63 mm3 in size with a maximum gain of 2.5 dBi. The novel filtenna design is equipped with an artificial magnetic conductor (AMC) for the first time to enhance the performance. A unit cell for the AMC is designed that offers zero phase shift in the desired frequencies. A four by four AMC array is designed using this unit cell, which is used as a reflective surface to improve the radiation characteristics of the filtenna. The gain of the filtenna is improved three times up to 7.5 dBi in both bands. The proposed design's overall planar dimensions are 80 × 80 mm2. Using AMC, the gain has improved with a very minute or no change in the other characteristics. The measured results are congruent with the simulated ones, illustrating that the filtenna has good impedance matching and excellent gain in both bands.

Type
Antenna Design, Modeling and Measurements
Copyright
© The Author(s), 2022. Published by Cambridge University Press in association with the European Microwave Association

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Tang, M-C, Wang, H, Deng, T and Ziolkowski, RW (2016) Compact planar ultrawideband antennas with continuously tunable, independent band-notched filters. IEEE Transactions on Antennas and Propagation 64, 32923301.CrossRefGoogle Scholar
Pal, P, Sinha, R and Mahto, SK (2021) Synthesis approach to design a compact printed monopole filtenna for 2.4 GHz Wi-Fi application. International Journal of RF and Microwave Computer-Aided Engineering 31, e22619, 1–8.CrossRefGoogle Scholar
Wu, W, Wang, C, Wang, X and Liu, Q (2013) Design of a compact filter-antenna using DGS structure for modern wireless communication systems. In 2013 5th IEEE International Symposium on Microwave, Antenna, Propagation and EMC Technologies for Wireless Communications. IEEE, Chengdu, China.CrossRefGoogle Scholar
Wu, W-J, Yin, Y-Z, Zuo, S-L, Zhang, Z-Y and Xie, J-J (2011) A new compact filter-antenna for modern wireless communication systems. IEEE Antennas and Wireless Propagation Letters 10, 11311134.Google Scholar
Tang, M-C, Chen, Y and Ziolkowski, RW (2016) Experimentally validated, planar, wideband, electrically small, monopole filtennas based on capacitively loaded loop resonators. IEEE Transactions on Antennas and Propagation 64, 33533360.CrossRefGoogle Scholar
Wu, W-J, Yin, Y-Z, Xie, J-J, Ren, X-S and Zuo, S-L (2012) Low-cost microstrip filter antenna with a monopole-like radiation pattern for RF front end. Microwave and Optical Technology Letters 54, 18101814.CrossRefGoogle Scholar
Mishra, SR and Kochuthundil Lalitha, S (2019) Filtennas for wireless application: a review. International Journal of RF and Microwave Computer-Aided Engineering 29, e21879.CrossRefGoogle Scholar
Mishra, SR and Lalitha, SK (2020) Implementation of defected ground structure for microstrip filtenna design. International Journal of RF and Microwave Computer-Aided Engineering 30, e21998, 1–12.CrossRefGoogle Scholar
Chuang, C-T and Chung, S-J (2011) A compact printed filtering antenna using a ground-intruded coupled line resonator. IEEE Transactions on Antennas and Propagation 59, 36303637.CrossRefGoogle Scholar
Chen, X, Zhao, F, Yan, L and Zhang, W (2013) A compact filtering antenna with flat gain response within the passband. IEEE Antennas and Wireless Propagation Letters 12, 857860.CrossRefGoogle Scholar
Mao, C-X, Gao, S, Wang, Y, Luo, Q and Chu, Q-X (2017) A shared-aperture dual-band dual-polarized filtering-antenna-array with improved frequency response. IEEE Transactions on Antennas and Propagation 65, 18361844.CrossRefGoogle Scholar
Mao, CX, Gao, S, Wang, Y, Sanz-Izquierdo, B, Wang, Z, Qin, F, Chu, QX, Li, J, Wei, G, and Xu, J (2016) Dual-band patch antenna with filtering performance and harmonic suppression. IEEE Transactions on Antennas and Propagation 64, 40744077.CrossRefGoogle Scholar
Hsieh, C-Y, Wu, C-H and Ma, T-G (2015) A compact dual-band filtering patch antenna using step impedance resonators. IEEE Antennas and Wireless Propagation Letters 14, 10561059.CrossRefGoogle Scholar
Niu, B-J, Tan, J-H and Wong, S-W (2019) A printed dual-band dipole filtenna with flexible frequency ratio and improved band-notched performance. International Journal of RF and Microwave Computer-Aided Engineering 29, e21675.CrossRefGoogle Scholar
Zhang, Y, Zhang, XY, Ye, L-H and Pan, Y-M (2016) Dual-band base station array using filtering antenna elements for mutual coupling suppression. IEEE Transactions on Antennas and Propagation 64, 34233430.CrossRefGoogle Scholar
Zhang, XY, Duan, W and Pan, Y-M (2015) High-gain filtering patch antenna without extra circuit. IEEE Transactions on Antennas and Propagation 63, 58835888.CrossRefGoogle Scholar
Dardeer, OM, Elsadek, HA, Elhennawy, HM and Abdallah, EA (2021) Single-fed dual wideband filtenna for 4G/5G mobile applications. International Journal of RF and Microwave Computer-Aided Engineering 31, e22616, 1–12.CrossRefGoogle Scholar
Al-Hasan, MJ, Denidni, TA and Sebak, AR (2013) Millimeter-wave EBG-based aperture-coupled dielectric resonator antenna. IEEE Transactions on Antennas and Propagation 61, 43544357.CrossRefGoogle Scholar
Yang, W, Wang, H, Che, W and Wang, J (2013) A wideband and high-gain edge-fed patch antenna and array using artificial magnetic conductor structures. IEEE Antennas and Wireless Propagation Letters 12, 769772.CrossRefGoogle Scholar
Akhoondzadeh-Asl, L, Kern, DJ, Hall, PS and Werner, DH (2007) Wideband dipoles on electromagnetic bandgap ground planes. IEEE Transactions on Antennas and Propagation 55, 24262434.CrossRefGoogle Scholar
Raad, HR, Abbosh, AI, Al-Rizzo, HM and Rucker, DG (2013) Flexible and compact AMC based antenna for telemedicine applications. IEEE Transactions on Antennas and Propagation 61, 524531.CrossRefGoogle Scholar
Prakash, P, Abegaonkar, MP, Basu, A and Koul, SK (2013) Gain enhancement of a CPW-fed monopole antenna using polarization-insensitive AMC structure. IEEE Antennas and Wireless Propagation Letters 12, 13151318.CrossRefGoogle Scholar
Elzwawi, GH, Mantash, M and Denidni, TA (2017) Improving the gain and directivity of CPW antenna by using a novel AMC surface. In 2017 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting. IEEE, San Diego, CA, USA.CrossRefGoogle Scholar