Hostname: page-component-8448b6f56d-c4f8m Total loading time: 0 Render date: 2024-04-19T17:45:09.706Z Has data issue: false hasContentIssue false
  • English
  • Français

Droplet–particle collision mechanics with film-boiling evaporation

Published online by Cambridge University Press:  05 February 2007

YANG GE  and
L.-S. FAN
YANG GE
Affiliation:
Department of Chemical and Biomolecular Engineering, The Ohio State University, Columbus, OH 43210, USA
L.-S. FAN*
Affiliation:
Department of Chemical and Biomolecular Engineering, The Ohio State University, Columbus, OH 43210, USA
*
†Author to whom correspondence should be addressed.
Get access Rights & Permissions [Opens in a new window]

Abstract

A three-dimensional numerical model is developed to simulate the process of collision between an evaporative droplet and a high-temperature particle. This phenomenon is of direct relevance to many engineering process operations, such as fluid catalytic cracking (FCC), polyethylene synthesis, and electronic materials coating. In this study, the level-set method and the immersed-boundary method are combined to describe the droplet–particle contact dynamics in a fixed Eulerian grid. The droplet deformation is captured by one level-set function while the solid–fluid boundary condition is imposed on the particle surface through the immersed-boundary method involving another level-set function. A two-dimensional vapour-layer model is developed to simulate the vapour flow dynamics. Equations for the heat transfer characteristics are formulated for each of the solid, liquid and gas phases. The incompressible flow-governing equations are solved using the finite-volume method with the ALE (arbitrary Lagrangian Eulerian) technique. The simulation results are validated through comparisons with experimental data obtained from the new experimental set-up designed in this study. An important feature of the droplet impacting on a particle with film boiling is that the droplet undergoes a spreading, recoiling and rebounding process, which is reproduced by the numerical simulation based on the model. Details of the collision such as spread factor, contact time and temperature distribution are provided. Simulations are also conducted to examine the effects of the particle size and the collision velocity. Although the value for the maximum spread factor is larger for a higher impact velocity and for a smaller particle, the contact time is independent of the impact velocity and particle size. Both the normal collision and the oblique collision are considered in this study.

Type
Papers
Information
Journal of Fluid Mechanics , Volume 573 , February 2007 , pp. 311 - 337
Copyright
Copyright © Cambridge University Press 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Brackbill, J. U., Kothe, D. B. & Zemach, C. 1992 A continuum method for modeling surface tension. J. Comput. Phys. 100, 335–354.CrossRefGoogle Scholar
Bussmann, M., Mostaghimi, J. & Chandra, S. 1999 On a three-dimensional volume tracking model of droplet impact. Phys. Fluids 11, 1406–1417.CrossRefGoogle Scholar
Bussmann, M., Mostaghimi, J. & Chandra, S. 2000 Modeling the splash of a droplet impacting a solid surface. Phys. Fluids 12, 3121–3132.CrossRefGoogle Scholar
Chandra, S. & Avedisian, C. T. 1991 On the collision of a droplet with a solid surface. Proc. R. Soc. Lond. A 432, 13–41.Google Scholar
Chen, C. & Fan, L.-S. 2004 Discrete simulation of gas–liquid bubble column and gas–liquid–solid fluidized bed. AIChE J. 50, 288–301.CrossRefGoogle Scholar
Chen, J. C. & Hsu, K. K. 1995 Heat transfer during liquid contact on superheated surfaces. J. Heat Transfer 117, 693–697.CrossRefGoogle Scholar
Chizhov, A. V. & Takayama, K. 2004 The impact of compressible liquid droplet on hot rigid surface. Intl J. Heat Mass Transfer 47, 1391–1401.CrossRefGoogle Scholar
Fadlun, E. A., Verzicco, R., Orlandi, P. & Yusof, J. M. 2000 Combined immersed-boundary finite-difference methods for three-dimensional complex flow simulations. J. Comput. Phys. 161, 35–60.CrossRefGoogle Scholar
Fan, L.-S., Lau, R., Zhu, C., Vuong, K., Warsito, W., Wang, X. & Liu, G. 2001 Evaporative liquid jets in gas–liquid–solid flow system. Chem. Engng Sci. 56, 5871–5891.CrossRefGoogle Scholar
Francois, M. & Shyy, W. 2003 Computations of drop dynamics with the immersed boundary method. Part 1: numerical algorithm and buoyancy-induced effect. Numer. Heat Transfer B 44, 101–117.CrossRefGoogle Scholar
Fujimoto, H. & Hatta, N. 1996 Deformation and rebounding processes of a water droplet impinging on a flat surface above Leidenfrost temperature. Trans. ASME I: J. Fluids Engng 118, 142–149.Google Scholar
Fukai, J., Shiiba, Y., Yamamoto, T. & Miyatake, O. 1995 Wetting effects on the spreading of a liquid droplet colliding with a flat surface: experiment and modeling. Phys. Fluids 7, 236.CrossRefGoogle Scholar
Ge, Y. & Fan, L.-S. 2005 Three-dimensional simulation of impingement of a liquid droplet on a flat surface in the Leidenfrost regime. Phy. Fluids 17, 027104.CrossRefGoogle Scholar
Ge, Y. & Fan, L.-S. 2006 3-D modeling of the dynamics and heat transfer characteristics of a subcooled droplet impact on a superheated flat surface. Intl J. Heat Mass Transfer 49, 4231–4249.CrossRefGoogle Scholar
Goldstein, D., Handler, R. & Sirovich, L. 1993 Modeling a no-slip flow boundary with an external force field. J. Comput. Phys. 105, 354.CrossRefGoogle Scholar
Gottfried, B. S., Lee, C. J. & Bell, K. J. 1966 The Leidenfrost phenomenon: film boiling of liquid droplets on a flat plate. Intl J. Heat Mass Transfer 9, 1167–1187.CrossRefGoogle Scholar
Harlow, F. H. & Shannon, J. P. 1967 The splash of a liquid droplet. J. Appl. Phys. 38, 3855.CrossRefGoogle Scholar
Harvie, D. J. E. & Fletcher, D. F. 2001a A hydrodynamic and thermodynamic simulation of droplet impacts on hot surface. Part I, theoretical model. Intl J. Heat Mass Transfer 44, 2633–2642.CrossRefGoogle Scholar
Harvie, D. J. E. & Fletcher, D. F. 2001b A hydrodynamic and thermodynamic simulation of droplet impacts on hot surface. Part II, validation and applications. Intl J. Heat Mass Transfer 44, 2643–2659.CrossRefGoogle Scholar
Hatta, N., Fujimoto, H., Kinoshita, K. & Takuda, H. 1997 Experimental study of deformation mechanism of a water droplet impinging on hot metallic surface above the Leidenfrost temperature. Trans. ASME I: J. Fluids Engng 119, 692–699.Google Scholar
Inada, S., Miyasaka, Y. & Nishida, K. 1985 Transient heat transfer for a water drop impinging on a heated surface. Bull. JSME 28, 2675–2681.CrossRefGoogle Scholar
Kashiwa, B. A., Padial, N. T., Rauenzahn, R. M. & Vanderheyden, W. B. 1994 A cell-centered ICE method for multiphase flow simulation. Los Alamos National Laboratory Res. Rep. LA-UR-93-3922.Google Scholar
Karl, A., Anders, K., Rieber, M. & Frohn, A. 1996 Deformation of liquid droplets during collisions with hot walls: experimental and numerical results. Part. Part. Syst. Charact. 13, 186–191.CrossRefGoogle Scholar
Mehdi-Nejad, V., Mostaghimi, J. & Chandra, S. 2003 Air bubble entrapment under an impacting droplet. Phys. Fluids 15, 173–183.CrossRefGoogle Scholar
Osher, S. & Sethian, J. A. 1988 Fronts propagation with curvature-dependent speed: algorithms based on Hamilton–Jacobi formulation. J. Comput. Phys. 79, 12.CrossRefGoogle Scholar
Pasandideh-Ford, M., Bhola, R., Chandra, S. & Mostaghimi, J. 1998 Deposition of tin droplets on a steel plate: simulation and experiments. Intl J. Heat Mass Transfer 41, 2929–2945.CrossRefGoogle Scholar
Peskin, C. S. 1977 Numerical analysis of blood flow in the heart. J. Comput. Phys. 25, 220.CrossRefGoogle Scholar
Qiao, Y. M. & Chandra, S. 1996 Boiling of droplet on a hot surface in low gravity. Intl J. Heat Mass Transfer 39 (7), 1379–1393.CrossRefGoogle Scholar
Richard, D., Clanet, C. & Quéré, D. 2002 Contact time of a bouncing drop. Nature 417, 811.CrossRefGoogle ScholarPubMed
Sussman, M., Smereka, P. & Osher, S. 1994 A level set approach for computing solutions to incompressible two-phase flow. J. Comput. Phys. 114, 146–159.CrossRefGoogle Scholar
Sussman, M., Fatemi, E., Smereka, P. & Osher, S. 1998 An improved level set method for incompressible two-phase flows. Comput. Fluids 27, 663–680.CrossRefGoogle Scholar
Wachters, L. H. J. & Westerling, N. A. J. 1966 The heat transfer from a hot wall to impinging water drops in the spheroidal state. Chem. Engng Sci. 21, 1047–1056.CrossRefGoogle Scholar
Wachters, L. H. J., Bonne, H. & Nouhuis, H. J. 1966 The heat transfer from a hot horizontal plate to sessile water drops in the spheroidal state. Chem. Engng Sci. 21, 923–936.CrossRefGoogle Scholar
Zheng, L. L. & Zhang, H. 2000 An adaptive level set method for moving-boundary problem: application to droplet spreading and solidification. Numer. Heat Transfer B 37, 437–454.CrossRefGoogle Scholar
Zhu, C., Wang, X. & Fan, L.-S. 2000 Effect of solids concentration on evaporative liquid jets in gas-solid flows. Powder Technology 111, 79–82.CrossRefGoogle Scholar