Hostname: page-component-76fb5796d-zzh7m Total loading time: 0 Render date: 2024-04-26T08:09:33.677Z Has data issue: false hasContentIssue false
  • English
  • Français

Flow dynamics and heat transfer in partially porous microchannel heat sinks

Published online by Cambridge University Press:  26 July 2019

Mohammad Zargartalebi Open the ORCID record for Mohammad Zargartalebi [Opens in a new window]  and
Jalel Azaiez Open the ORCID record for Jalel Azaiez [Opens in a new window]
Mohammad Zargartalebi*
Affiliation:
Department of Chemical and Petroleum Engineering, Schulich School of Engineering, University of Calgary, Calgary, AB T2N 1N4, Canada
Jalel Azaiez
Affiliation:
Department of Chemical and Petroleum Engineering, Schulich School of Engineering, University of Calgary, Calgary, AB T2N 1N4, Canada
*
†Email address for correspondence: Mohammad.zargartaleb@ucalgary.ca
Get access Rights & Permissions [Opens in a new window]

Abstract

In this study, the flow dynamics and heat transfer in partially filled pin-based microchannel heat sinks (MCHS) are examined. The lattice Boltzmann method is used to analyse the physics of these systems and examine the effects of the flow, pin configuration, size and porous medium height. The results of the study reveal that, unlike the fully filled pin-based MCHS, there is no unique behaviour for the pin configuration effects and the performance of partially filled pin-based MCHS depends on the porous medium size and structure as well as the inertial forces in the flow. In particular, it is found that there are hydrodynamic and thermal-based critical porous medium heights at which the best performance in terms of heat removal switches from the inline to the staggered configuration. The dependence of these critical heights on the Reynolds number and the porous medium properties are analysed and the effects of the flow dynamics are further unravelled through a particle tracing technique. Furthermore, a simple flow model is developed, and is shown to capture well the main trends obtained from the simulations and to bring to light more of the system physics that help explain the interplay between the different parameters.

JFM classification

Convection: Convection in porous media Mathematical Foundations: General fluid mechanics Low-Reynolds-number flows: Porous media
Type
JFM Papers
Information
Journal of Fluid Mechanics , Volume 875 , 25 September 2019 , pp. 1035 - 1057
Copyright
© 2019 Cambridge University Press 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Ahmed, H. E., Salman, B. H., Kherbeet, A. S. & Ahmed, M. I. 2018 Optimization of thermal design of heat sinks: a review. Intl J. Heat Mass Transfer 118, 129–153.Google Scholar
Barletta, A., Lazzari, S., Magyari, E. & Pop, I. 2008 Mixed convection with heating effects in a vertical porous annulus with a radially varying magnetic field. Intl J. Heat Mass Transfer 51 (25–26), 5777–5784.Google Scholar
Benger, R., Wenzl, H., Beck, H.-P., Jiang, M., Ohms, D. & Schaedlich, G. 2009 Electrochemical and thermal modeling of lithium-ion cells for use in HEV or EV application. World Electric Vehicle J. 3 (2), 342–351.Google Scholar
Bergman, T. L., Incropera, F. P., DeWitt, D. P. & Lavine, A. S. 2011 Fundamentals of Heat and Mass Transfer. Wiley.Google Scholar
Bhatnagar, P. L., Gross, E. P. & Krook, M. 1954 A model for collision processes in gases. I. Small amplitude processes in charged and neutral one-component systems. Phys. Rev. 94 (3), 511–525.Google Scholar
Bodla, K. K., Weibel, J. A. & Garimella, S. V. 2013 Advances in fluid and thermal transport property analysis and design of sintered porous wick microstructures. Trans. ASME J. Heat Transfer 135 (6), 061202.Google Scholar
Carman, P. C. 1937 Fluid flow through granular beds. Trans. Inst. Chem. Engrs 15, 150–166.Google Scholar
Chen, C.-C. & Huang, P.-C. 2012 Numerical study of heat transfer enhancement for a novel flat-plate solar water collector using metal-foam blocks. Intl J. Heat Mass Transfer 55 (23–24), 6734–6756.Google Scholar
Chikh, S., Boumedien, A., Bouhadef, K. & Lauriat, G. 1995a Analytical solution of non-Darcian forced convection in an annular duct partially filled with a porous medium. Intl J. Heat Mass Transfer 38 (9), 1543–1551.Google Scholar
Chikh, S., Boumedien, A., Bouhadef, K. & Lauriat, G. 1995b Non-Darcian forced convection analysis in an annulus partially filled with a porous material. Numer. Heat Transfer A 28 (6), 707–722.Google Scholar
Ergun, S. 1952 Fluid flow through packed columns. Chem. Engng Prog. 48, 89–94.Google Scholar
Gallego, N. C. & Klett, J. W. 2003 Carbon foams for thermal management. Carbon 41 (7), 1461–1466.Google Scholar
Ghahremannezhad, A. & Vafai, K. 2018 Thermal and hydraulic performance enhancement of microchannel heat sinks utilizing porous substrates. Intl J. Heat Mass Transfer 122, 1313–1326.Google Scholar
Ghahremannezhad, A., Xu, H., Nazari, M. A., Ahmadi, M. H. & Vafai, K. 2019 Effect of porous substrates on thermohydraulic performance enhancement of double layer microchannel heat sinks. Intl J. Heat Mass Transfer 131, 52–63.Google Scholar
Griffith, M. D., Thompson, M. C., Leweke, T., Hourigan, K. & Anderson, W. P. 2007 Wake behaviour and instability of flow through a partially blocked channel. J. Fluid Mech. 582, 319–340.Google Scholar
Halkarni, S. S., Sridharan, A. & Prabhu, S. V. 2017 Measurement of local wall heat transfer coefficient in randomly packed beds of uniform sized spheres using infrared thermography (IR) and water as working medium. Appl. Therm. Engng 126, 358–378.Google Scholar
Hasan, M. I. 2014 Investigation of flow and heat transfer characteristics in micro pin fin heat sink with nanofluid. Appl. Therm. Engng 63 (2), 598–607.Google Scholar
Hidalgo, J. J. & Dentz, M. 2018 Mixing across fluid interfaces compressed by convective flow in porous media. J. Fluid Mech. 838, 105–128.Google Scholar
Higuera, F. J & Jiménez, J. 1989 Boltzmann approach to lattice gas simulations. Europhys. Lett. 9 (7), 663–668.Google Scholar
Huang, P.-C., Chen, C.-C. & Hwang, H.-Y. 2013 Thermal enhancement in a flat-plate solar water collector by flow pulsation and metal-foam blocks. Intl J. Heat Mass Transfer 61, 696–720.Google Scholar
Hung, T.-C., Huang, Y.-X. & Yan, W.-M. 2013 Thermal performance analysis of porous-microchannel heat sinks with different configuration designs. Intl J. Heat Mass Transfer 66, 235–243.Google Scholar
Jeon, D. H. & Baek, S. M. 2011 Thermal modeling of cylindrical lithium ion battery during discharge cycle. Energy Convers. Manage. 52 (8–9), 2973–2981.Google Scholar
Jiang, P.-X., Fan, M.-H., Si, G.-S. & Ren, Z.-P. 2001 Thermal–hydraulic performance of small scale micro-channel and porous-media heat-exchangers. Intl J. Heat Mass Transfer 44 (5), 1039–1051.Google Scholar
Kandlikar, S. G. & Grande, W. J. 2002 Evolution of microchannel flow passages: thermohydraulic performance and fabrication technology. In ASME 2002 International Mechanical Engineering Congress and Exposition, pp. 59–72. American Society of Mechanical Engineers.Google Scholar
Khan, W. A., Culham, R. J. & Yovanovich, M. M. 2006 Analytical model for convection heat transfer from tube banks. J. Thermophys. Heat Transfer 20 (4), 720–727.Google Scholar
Klinbun, W., Vafai, K. & Rattanadecho, P. 2012 Electromagnetic field effects on transport through porous media. Intl J. Heat Mass Transfer 55 (1–3), 325–335.Google Scholar
Lavasani, A. M. & Bayat, H. 2016 Numerical study of pressure drop and heat transfer from circular and cam-shaped tube bank in cross-flow of nanofluid. Energy Convers. Manage. 129, 319–328.Google Scholar
Leong, K. C., Li, H. Y., Jin, L. W. & Chai, J. C. 2010 Numerical and experimental study of forced convection in graphite foams of different configurations. Appl. Therm. Engng 30 (5), 520–532.Google Scholar
Lu, S. & Vafai, K. 2016 A comparative analysis of innovative microchannel heat sinks for electronic cooling. Intl Commun. Heat Mass Transfer 76, 271–284.Google Scholar
Mahmoudi, Y. 2014 Effect of thermal radiation on temperature differential in a porous medium under local thermal non-equilibrium condition. Intl J. Heat Mass Transfer 76, 105–121.Google Scholar
Mohamad, A. A. 2011 Lattice Boltzmann Method: Fundamentals and Engineering Applications with Computer Codes. Springer Science & Business Media.Google Scholar
Nazari, M., Mohebbi, R. & Kayhani, M. H. 2014 Power-law fluid flow and heat transfer in a channel with a built-in porous square cylinder: lattice Boltzmann simulation. J. Non-Newtonian Fluid Mech. 204, 38–49.Google Scholar
Ndao, S., Peles, Y. & Jensen, M. K. 2014 Effects of pin fin shape and configuration on the single-phase heat transfer characteristics of jet impingement on micro pin fins. Intl J. Heat Mass Transfer 70, 856–863.Google Scholar
Poulikakos, D. & Kazmierczak, M. 1987 Forced convection in a duct partially filled with a porous material. J. Heat Transfer 109 (3), 653–662.Google Scholar
Pourmehran, O., Rahimi-Gorji, M., Hatami, M., Sahebi, S. A. R. & Domairry, G. 2015 Numerical optimization of microchannel heat sink (MCHS) performance cooled by KKL based nanofluids in saturated porous medium. J. Taiwan Inst. Chem. Engrs 55, 49–68.Google Scholar
Rohsenow, W. M., Hartnett, J. P. & Cho, Y. I.(Eds) 1998 Handbook of Heat Transfer, vol. 3. McGraw-Hill.Google Scholar
Rubio-Jimenez, C. A., Kandlikar, S. G. & Hernandez-Guerrero, A. 2012 Numerical analysis of novel micro pin fin heat sink with variable fin density. IEEE Trans. Compon. Packag. Manuf. Technol. 2 (5), 825–833.Google Scholar
Schelling, P. K., Shi, L. & Goodson, K. E. 2005 Managing heat for electronics. Mater. Today 8 (6), 30–35.Google Scholar
Sukop, M. C. & Thorne, D. T. Jr 2005 Lattice Boltzmann Modeling: An Introduction for Geoscientists and Engineers. Springer.Google Scholar
Sung, H. J., Kim, S. Y. & Hyun, J. M. 1995 Forced convection from an isolated heat source in a channel with porous medium. Intl J. Heat Fluid Flow 16 (6), 527–535.Google Scholar
Xu, H., Zhao, C. & Vafai, K. 2018 Analysis of double slip model for a partially filled porous microchannel: an exact solution. Eur. J. Mech. (B/Fluids) 68, 1–9.Google Scholar
Zargartalebi, M. & Azaiez, J. 2018a Heat transfer analysis of nanofluid based microchannel heat sink. Intl J. Heat Mass Transfer 127, 1233–1242.Google Scholar
Zargartalebi, M. & Azaiez, J. 2018b Mesoscopic study of miscible nanoflow instabilities. Phys. Fluids 30 (2), 024105.Google Scholar
Zargartalebi, M. & Azaiez, J. 2019 Effects of nanoparticle adsorption on heat transfer in random pin-based microchannel heat sinks. Intl J. Heat Mass Transfer 130, 420–430.Google Scholar
Zhao, J., Huang, S., Gong, L. & Huang, Z. 2016 Numerical study and optimizing on micro square pin-fin heat sink for electronic cooling. Appl. Therm. Engng 93, 1347–1359.Google Scholar
Zou, Q. & He, X. 1997 On pressure and velocity boundary conditions for the lattice Boltzmann BGK model. Phys. Fluids 9 (6), 1591–1598.Google Scholar