Hostname: page-component-848d4c4894-wg55d Total loading time: 0 Render date: 2024-05-13T08:21:21.177Z Has data issue: false hasContentIssue false
  • English
  • Français

Frequency of sublayer bursting in a curved bend

Published online by Cambridge University Press:  26 April 2006

Mohammed Anwer  and
Ronald M. C. So
Mohammed Anwer
Affiliation:
Mechanical and Aerospace Engineering, Arizona State University, Tempe, AZ 85287-6106, USA
Ronald M. C. So
Affiliation:
Mechanical and Aerospace Engineering, Arizona State University, Tempe, AZ 85287-6106, USA
Get access Rights & Permissions [Opens in a new window]

Abstract

The characteristics of sublayer bursting in turbulent pipe flow through a 180° curved bend at a pipe Reynolds number of 50000 were investigated. In particular, the effects of bend curvature on the bursting frequency were studied in detail. A flush-mounted shear stress gauge was used to measure the wall shear stress and the VITA technique was applied to isolate the bursting events in the wall shear signals. The results show that the bursting frequency starts to drop rather dramatically at the inlet region of the inner bend (closest to the centre of curvature of the bend). Contrary to expectation, the bursting frequency remains fairly constant along the outer bend, but increases sharply as the flow comes out of the bend. Possible explanations for this behaviour are proposed based on the important external effects present in a pipe bend; that is, those due to centrifugal force, streamline curvature and the superimposed secondary flow. Even though wall pressure measurements show that the flow recovers to a fully developed straight pipe condition at a short distance downstream of the bend exit, the circumferential wall shear stress distribution, the spectral content of the wall shear signal and the associated bursting frequency suggest that the near-wall flow takes a much longer distance to return to an unperturbed straight-pipe condition.

Type
Research Article
Information
Journal of Fluid Mechanics , Volume 210 , January 1990 , pp. 415 - 435
Copyright
© 1990 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Achia, B. U. & Thompson, P. W. 1977 Structure of the turbulent boundary layer in drag reducing pipe flow. J. Fluid Mech. 81, 439–464.Google Scholar
Anwer, M., So, R. M. C. & Lai, Y. G. 1989 Perturbation by and recovery from bend curvature of a fully developed turbulent pipe flow.. Phys. Fluids A 1, 1387–1397.Google Scholar
Azzola, J., Humpherey, J. A. C., Iacovides, I. & Launder, B. E. 1986 Developing turbulent flow in a U-bend of circular cross section. Trans. ASME I: J. Fluids Engng 108, 214–220.Google Scholar
Bakewell, H. P. & Lumley, J. L. 1967 Viscous sub-layer and adjacent wall region in turbulent pipe-flow. Phys. Fluids 10, 1880–1889.Google Scholar
Bellhouse, B. J. & Schultz, D. L. 1966 Determination of mean and dynamic skin friction, separation and transition in low-speed flow with a thin-film heated element. J. Fluid Mech. 24, 379–400.Google Scholar
Blackwelder, R. F. 1978 The bursting process in turbulent boundary layers. Workshop on Coherent Structure of Turbulent Boundary Layer, pp. 211–224. AFOSR/Lehigh University.
Blackwelder, R. F. & Haritonidis, J. H. 1983 Scaling of the bursting frequency in turbulent boundary layers. J. Fluid Mech. 132, 87–112.Google Scholar
Blackwelder, R. F. & Kaplan, R. E. 1976 On the wall structure of the turbulent boundary layer. J. Fluid Mech. 76, 89–112.Google Scholar
Bogard, D. G. & Tiederman, W. G. 1986 Burst detection with single-point velocity measurements. J. Fluid Mech. 162, 389–413.Google Scholar
Brown, G. L. & Thomas, A. S. W. 1977 Large structure in a turbulent boundary layer. Phys. Fluids 20, S243–S252.Google Scholar
Clauser, L. M. & Clauser, F. 1937 The effect of curvature on the transition from laminar to turbulent boundary layer. NACA TN 613.Google Scholar
Coles, D. 1978 A model for flow in the viscous sub-layer. Workshop on Coherent Structure of Turbulent Boundary Layers, pp. 462–175. AFOSR/Lehigh University.
Corino, E. R. & Brodkey, R. S. 1969 A visual investigation of wall region in turbulent flow. J. Fluid Mech. 37, 1–30.Google Scholar
Corrsin, S. 1957 Some current problems of turbulent shear flows. Proc. 1st. Naval Hyd. Symp. Nat. Acad. Sci./Nat. Res. Counc. 373.
Durrett, R. P., Stevenson, W. H. & Thompson, H. D. 1985 Radial and axial turbulent flow measurements with an LDV in an axisymmetric sudden expansion air flow. Int. Symp. on Laser Anemometry (ed. A. Dybbs & P. A. Pfund), pp. 127–133. ASME special publ. FED-33.
Falco, R. E. 1978 Wall layer structure of a turbulent boundary layer. Bull. Am. Phys. Soc. II, 23, 1000.Google Scholar
Head, M. R. & Bandyopadhyay, P. 1978 Combined flow visualization and hot-wire measurements in turbulent boundary layers. Workshop on Coherent Structure of Turbulent Boundary Layer, pp. 98–125. AFOSR/Lehigh University.
Head, M. R. & Bandyopadhyay, P. 1981 New aspects of turbulent boundary layer structure. J. Fluid Mech. 107, 297–338.Google Scholar
Heidrick, T. R., Banerjee, S. & Azad, R. S. 1977 Experiments on the structure of turbulence in fully developed pipe flow. Part 2. A statistical procedure of identifying ‘bursts’ in the wall layer and some characteristics of flow during bursting periods. J. Fluid Mech. 56, 705–723.Google Scholar
Johansson, A. V. & Alfredsson, P. H. 1982 On the structure of turbulent channel flow. J. Fluid Mech. 122, 295–314.Google Scholar
Kim, H. T., Kline, S. J. & Reynolds, W. C. 1971 The production of turbulence near a smooth wall in a turbulent boundary layer. J. Fluid Mech. 50, 133–160.Google Scholar
Kim, J. & Moin, P. 1986 The structure of vorticity in turbulent channel flow. Part 2. Study of ensembled averaged field. J. Fluid Mech. 162, 339–364.Google Scholar
Klebanoff, P. S. 1955 Characteristics of turbulence in a boundary layer with zero pressure gradient. NACA TR 1247.Google Scholar
Klebanoff, P. S. & Diehl, A. W. 1952 Some features of artificially thickened fully developed turbulent boundary layer with zero pressure gradient. NACA Rep. 1110.Google Scholar
Kline, S. J. 1978 The role of visualization in the study of the structure of the turbulent boundary layer. Workshop on Coherent Structures of Turbulent Boundary Layers, pp. 1–27. AFOSR/Lehigh University.
Kline, S. J., Reynolds, W. C., Schraub, F. A. & Rundstadler, P. W. 1967 The structure of turbulent boundary layers. J. Fluid Mech. 30, 741–773.Google Scholar
Kobashi, Y. & Ichijo, M. 1986 Wall pressure and its relation to turbulent structure of a boundary layer. Expts Fluids 4, 49–55.Google Scholar
Lai, Y. G., So, R. M. C., Anwer, M. & Hwang, B. C. 1989 Calculation of curved-pipe flow using a Reynolds-stress closure. Phys. Fluids (submitted).Google Scholar
Laufer, J. 1954 The structure of a turbulence in fully developed pipe flow. NACA Rep. 1174.Google Scholar
Ligrani, P. M. & Bradshaw, P. 1987 Spatial resolution and measurement of turbulence in viscous sub-layer using sub-miniature hot-wire probes. Expts Fluids 5, 407–417.Google Scholar
Lu, S. S. & Willmarth, W. W. 1973 Measurements of the structure of Reynolds stress in a turbulent boundary layer. J. Fluid Mech. 60, 481–511.Google Scholar
Luchik, T. S. & Tiederman, W. G. 1987 Timescale and structure of ejection and burst in turbulent channel flows. J. Fluid Mech. 174, 529–552.Google Scholar
Mautner, T. S. & Van Atta, C. W. 1986 Wall shear stress measurements in the plane of symmetry of a turbulent spot. Expts Fluids 4, 153–162.Google Scholar
Menendez, T. S. & Ramaprian, B. R. 1985 The use of flush-mounted hot-film gauges to measure skin friction in unsteady boundary layers. J. Fluid Mech. 161, 139–159.Google Scholar
Moin, P. & Kim, J. 1985 Analysis of vorticity field in turbulent channel flows. J. Fluid Mech. 155, 441–464.Google Scholar
Moser, M. D. & Moin, P. 1987 The effects of curvature in wall bounded turbulent flows. J. Fluid Mech. 175, 479–510.Google Scholar
Perry, A. E. & Chong, M. S. 1982 On the mechanism of wall turbulence. J. Fluid Mech. 119, 173–217.Google Scholar
Perry, A. E., Lim, T. T. & Teh, E. W. 1981 A visual study of turbulent spots. J. Fluid Mech. 104, 387–405.Google Scholar
Rowe, M. 1970 Measurements and computation of flow in pipe bends. J. Fluid Mech. 43, 771–783.Google Scholar
Sabot, J. & Comte-Bellot, G. 1976 Intermittency of coherent structures in the core region of fully developed turbulent pipe flow. J. Fluid Mech. 74, 767–796.Google Scholar
Smith, C. R. 1978 Visualisation of a turbulent boundary layer structure using a moving hydrogen bubble-wire probe. Workshop on Coherent Structure of Turbulent Boundary Layer, pp. 48–94. AFOSR/Lehigh University.
So, R. M. C. & Mellor, G. L. 1973 Experiment on convex curvature effects in turbulent boundary layer. J. Fluid Mech. 60, 43–62.Google Scholar
So, R. M. C. & Mellor, G. L. 1975 Experiments on turbulent boundary layer on a concave wall. Aero. Quart. 26, 25–40.Google Scholar
Strickland, J. H. & Simpson, R. L. 1975 ‘Bursting’ frequency obtained from wall shear stress fluctuations in a turbulent boundary layer. Phys. Fluids 18, 306–308.Google Scholar
Theodorsen, T. 1952 Mechanism of turbulence. Proc. 2nd Midwester Conf. Fluid Mech., pp. 1.Google Scholar
Theodorsen, T. 1955 The structure of turbulence. 50 Jahre Grenzschichtforschung (ed. H. Görtler & W. Tollmein), p. 55.
Ueda, H. & Mizushima, T. 1979 Turbulence structure in the inner part of the wall region in a fully developed turbulent tube flow. Proc. 5th Biennial Symp. on Turbulence, pp. 357.