Hostname: page-component-7dd5485656-zklqj Total loading time: 0 Render date: 2025-10-31T03:28:11.627Z Has data issue: false hasContentIssue false
  • English
  • Français

Development and investigation of novel nanoparticle embedded solutions with enhanced optical transparency

Published online by Cambridge University Press:  26 November 2014

Rouholah Ashiri
Rouholah Ashiri*
Affiliation:
Department of Materials Science and Engineering, Dezful Branch, Islamic Azad University, P. O. Box 313, Dezful, Iran
*
a)Address all correspondence to this author. e-mail: ro_ashiri@yahoo.com
Get access

Abstract

The demands for highly transparent thin films for many integrated optical systems increase rapidly. The aim of the present work is to address these important needs. We show a novel approach for the nanocolloidal processing of barium titanate with enhanced optical transparency. The results showed that the stability of the prepared solution and optical transparency of the resulted thin film improved significantly. The study of the structure and properties of the prepared solutions indicated that the enhanced and homogenous transparency is due to the size-effect of the particles embedded in the solution, which are nanostructured. It seems to us that the proposed method has the capability of being a general strategy for obtaining highly transparent solutions and thin films. Moreover, the enhanced transparency of the prepared thin films can improve the energy efficiency of the solar power systems significantly.

Keywords

optical transmissionsolar cellssol–gel materialsthin filmssize-effect

Information

Type
Articles
Information
Journal of Materials Research , Volume 29 , Issue 24 , 28 December 2014 , pp. 2949 - 2956
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

Ashiri, R., Nemati, A., Sasani Ghamsari, M., and Adelkhani, H.: Characterization of optical properties of amorphous BaTiO3 nanothin films. J. Non-Cryst. Solids 355, 2480 (2009).CrossRefGoogle Scholar
Ashiri, R., Nemati, A., Sasani Ghamsari, M., Sanjabi, S., and Aalipour, M.: A modified method for barium titanate nanoparticles synthesis. Mater. Res. Bull. 46, 2291 (2011).Google Scholar
Ashiri, R.: Analysis and characterization of phase evolution of nano-sized BaTiO3 powder synthesized through a chemically modified sol–gel process. Metall. Mater. Trans. A 43, 4414 (2012).Google Scholar
Ashiri, R.: Detailed FTIR spectroscopy characterization and thermal analysis of synthesis of barium titanate nanoscale particles through a newly developed process. Vib. Spectrosc. 66, 24 (2013).CrossRefGoogle Scholar
Joya, Y.F. and Liu, Z.: Formation of ultraviolet laser-annealed mesoporous anatase films by a sol–gel process. Scr. Mater. 60, 467 (2009).Google Scholar
Lecerf, N., Mathur, S., Shen, H., Veith, M., and Hüfner, S.: Chemical vapour and sol–gel syntheses of nano-composites and -ceramics using metal-organic precursors. Scr. Mater. 44, 2157 (2001).Google Scholar
Sporn, D.: Chemical Physics of Thin Film Deposition for Micro- and Nano-Technologies (Springer, Netherlands, 2002).Google Scholar
Zhao, J., Wang, X., Che, R., and Li, L.: Dispersion of barium titanate in aqueous media. Ceram. Int. 33, 207 (2007).Google Scholar
Yu, P., Wang, X., and Cui, B.: Preparation and characterization of BaTiO3 powders and ceramics by the sol–gel process using organic monoacid as surfactant. Scr. Mater. 57, 623 (2007).CrossRefGoogle Scholar
Hsiue, G.H., Chu, L.W., and Lin, I.N.: Optimized phosphate ester structure for the dispersion of nano-sized barium titanate in proper non-aqueous media. Colloids Surf., A 294, 212 (2007).Google Scholar
Chen, W., Zhang, J., Fang, Q., Li, S., Wu, J., Li, F., and Jiang, K.: Sol–gel preparation of thick titania coatings aided by organic binder materials. Sens. Actuators, B 100, 195 (2004).CrossRefGoogle Scholar
Gupta, R., Mozumdar, S., and Chaudhury, N.K.: Effect of ethanol variation on the internal environment of sol–gel bulk and thin films with aging. Biosens. Bioelectron. 21, 549 (2005).Google Scholar
Tangwiwat, S. and Milne, S.J.: Barium titanate sols prepared by a diol-based sol–gel route. J. Non-Cryst. Solids 351, 976 (2005).Google Scholar
Kuo, W.K., Lo, B., and Ling, Y.C.: Steric stabilization of sol–gel prepared BaTiO3 precursors with nonylphenoxypolyethoxyethanol. Mater. Chem. Phys. 60, 132 (1999).Google Scholar
Xing, X., Deng, J., Chen, J., and Liu, G.: Phase evolution of barium titanate from alkoxide gel-derived precursor. J. Alloys Compd. 384, 312 (2004).CrossRefGoogle Scholar
Lee, B. and Zhang, J.: Preparation, structure evolution and dielectric properties of BaTiO3 thin films and powders by an aqueous sol–gel process. Thin Solid Films 388, 107 (2001).CrossRefGoogle Scholar
Burgos, M. and Langlet, M.: The sol–gel transformation of TIPT coatings: A FTIR study. Thin Solid Films 349, 19 (1999).Google Scholar
Thomas, R., Dube, D.C., Kamalasanan, M.N., and Chandra, S.: Optical and electrical properties of BaTiO3 thin films prepared by chemical solution deposition. Thin Solid Films 346, 212 (1999).Google Scholar
Harizanov, O. and Harizanova, A.: Formation and characterization of sol–gel barium titanate. Mater. Sci. Eng., B 106, 191 (2004).Google Scholar
Nenkov, M. and Pencheva, T.: Investigation of inhomogeneity of BaTiO3 thin films using transmittance spectra measurements. Thin Solid Films 324, 305 (1998).Google Scholar
Harizanov, O.A.: Sol–gel BaTiO3 from a peptized solution. Mater. Lett. 34, 232–236 (1998).Google Scholar
Sadrnejad, SKh.: Kinetic Process in Materials Engineering and Metallurgy (Amirkabir Publishing Crop, Tehran, 2004).Google Scholar
Harizanov, O. and Harizanov, A.: Development and investigation of sol–gel solutions for the formation of TiO2 coatings. Sol. Energy Mater. Sol. Cells 63, 185 (2000).Google Scholar
Cai, W., Fu, Ch., Gao, J., Guo, Q., Deng, X., and Zhang, Ch.: Preparation and optical properties of barium titanate thin films. Phys. B 406, 3583 (2011).Google Scholar
Pencheva, T. and Nenkov, M.: Optical inhomogeneity of BaTiO3 thin films and its correlation with some deposition conditions. Vacuum 58, 374 (2000).CrossRefGoogle Scholar
Ashiri, R., Nemati, A., and Sasani Ghamsari, M.: Crack-free nanostructured BaTiO3 thin films prepared by sol–gel dip-coating technique. Ceram. Int. 40, 8613 (2014).CrossRefGoogle Scholar
Ashiri, R.: Analysis and characterization of relationships between the processing and optical responses of amorphous BaTiO3 nanothin films obtained by an improved wet chemical process. Metall. Mater. Trans. B 45, 1472 (2014).Google Scholar
Ashiri, R.: A mechanistic study of nanoscale structure development, phase transition, morphology evolution, and growth of ultrathin barium titanate nanostructured films. Metall. Mater. Trans. A 45, 4138 (2014).CrossRefGoogle Scholar
Ashiri, R., Moghtada, A., Shahrouzianfar, A., and Ajami, R.: Low temperature synthesis of carbonate-free barium titanate nanoscale crystals: Toward a generalized strategy of titanate-based perovskite nanocrystals synthesis. J. Am. Ceram. Soc. 97, 2027 (2014).Google Scholar
Davar, F., Loghman-Estarki, M.R., and Ashiri, R.: From inorganic/organic nanocomposite based on chemically hybridized CdS–TGA to pure CdS nanoparticles. J. Ind. Eng. Chem. 21, 965 (2015).Google Scholar
Davar, F., Loghman-Estarki, M.R., Salavati-Niasari, M., and Ashiri, R.: Synthesis of volcano-like CdS/organic nanocomposite. Int. J. Appl. Ceram. Technol. 11, 637 (2014).Google Scholar
Ashiri, R., Moghtada, A., and Ajami, R.: Sonochemical synthesis of SrTiO3 nanocrystals at low temperature. Int. J. Appl. Ceram. Technol. DOI:10.1111/ijac.12315, in press.Google Scholar
Ashiri, R. and Moghtada, A.: Carbonate-free strontium titanium oxide nanosized crystals with tailored morphology: Facile synthesis, characterization and formation mechanism. Metall. Mater. Trans. B 45, 1979 (2014).Google Scholar
Zhang, H.X.: Optical and electrical properties of sol–gel derived BaTiO3 films on ITO coated glass. Mater. Chem. Phys. 63, 174 (2000).Google Scholar