Hostname: page-component-76fb5796d-qxdb6 Total loading time: 0 Render date: 2024-04-30T02:15:10.010Z Has data issue: false hasContentIssue false
  • English
  • Français

Microwave sintering of hydroxyapatite ceramics

Published online by Cambridge University Press:  03 March 2011

Yi Fang ,
Dinesh K. Agrawal ,
Della M. Roy  and
Rustum Roy
Yi Fang
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, Pennsylvania 16802-4801
Dinesh K. Agrawal
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, Pennsylvania 16802-4801
Della M. Roy
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, Pennsylvania 16802-4801
Rustum Roy
Affiliation:
Materials Research Laboratory, The Pennsylvania State University, University Park, Pennsylvania 16802-4801
Get access

Abstract

Hydroxyapatite ceramics have been fabricated by microwave sintering in a 500 W microwave oven. Circular-plate specimens of various green densities were sintered in the oven at 1200 and 1300 °C, for 5, 10, and 20 min, respectively. Ceramics with density up to 97% of the theoretical were obtained. Density, grain size, microstructure, and strength of the ceramics sintered by microwave and by conventional methods were compared. The results show that microwave sintering of hydroxyapatite is not only highly efficient in saving time and energy, but can also improve the microstructure and thus enhance mechanical strength of the ceramics.

Type
Articles
Information
Journal of Materials Research , Volume 9 , Issue 1 , January 1994 , pp. 180 - 187
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1Roy, R., Komarneni, S., and Yang, L. J., J. Am. Ceram. Soc. 68 (7), 392–395 (1985).CrossRefGoogle Scholar
2Komarneni, S. and Roy, R., Mater. Lett. 4 (2), 107–110 (1986).Google Scholar
3Sutton, W. H., Am. Ceram. Soc. Bull. 68 (2), 376–386 (1989).Google Scholar
4Monma, H. and Kamiya, T., J. Mater. Sci. 22, 4247–4250 (1987).CrossRefGoogle Scholar
5Rudanick, A., Hunter, A. R., and Holden, F. C., Mater. Res. Stand. April, 283 (1963).Google Scholar
6Kingery, W. D., Bowen, H. K., and Uhlmann, D. R., Introduction to Ceramics, 2nd ed. (John Wiley, New York, 1976), p. 475.Google Scholar
7Kingery, W. D., Bowen, H. K., and Uhlmann, D. R., Introduction to Ceramics, 2nd ed. (John Wiley, New York, 1976), p. 469.Google Scholar