Hostname: page-component-76fb5796d-r6qrq Total loading time: 0 Render date: 2024-04-29T12:20:55.838Z Has data issue: false hasContentIssue false
  • English
  • Français

Design and production of the Zr3Ti2Si3 intermetallic compound

Published online by Cambridge University Press:  31 January 2011

Pedro B. Celis ,
Eiji Kagawa  and
Kozo Ishizaki
Pedro B. Celis
Affiliation:
Department of Materials Science and Engineering, School of Mechanical Engineering, Nagaoka University of Technology, Nagaoka, 940–21, Japan
Eiji Kagawa
Affiliation:
Department of Materials Science and Engineering, School of Mechanical Engineering, Nagaoka University of Technology, Nagaoka, 940–21, Japan
Kozo Ishizaki
Affiliation:
Department of Materials Science and Engineering, School of Mechanical Engineering, Nagaoka University of Technology, Nagaoka, 940–21, Japan
Get access

Abstract

The new ternary intermetallic compound Zr3Ti2Si3, with a (Mn5Si3)16H crystal structure, was designed based on the information of the crystal structure of the related binary compounds Zr5Si3 and Ti5Si3 in order to be used in ultra-high temperature structural applications. By x-ray diffraction analysis, we demonstrate the possibility of substituting an entire layer of zirconium atoms with a layer of titanium atoms in the (Zr5Si3)16H. An analysis of atomic neighbor distances in each compound was done. It was found that the Zr–Si relative interatomic distance diminishes while the Ti–Si distance increases. This indicates that Zr–Si bond strength is maintained as in the binary Zr5Si3. The resulting ternary intermetallic compound has a 16H crystal structure and has a lower density than the original compound of zirconium silicide. This new compound, which is stronger than Ti5Si3 and lighter than Zr5Si3, is considered an excellent candidate of the next generation of intermetallic compounds for ultra-high temperature structural applications.

Type
Articles
Information
Journal of Materials Research , Volume 6 , Issue 10 , October 1991 , pp. 2077 - 2083
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Fleischer, R. L., J. Mater. Sci. 22, 2281–2288 (1987).CrossRefGoogle Scholar
2.Taub, A. I. and Fleischer, R. L., Science 243, 616621 (1989).CrossRefGoogle Scholar
3.Celis, P. B. and Ishizaki, K., J. Mater. Sci. 26, 34973502 (1991).CrossRefGoogle Scholar
4.Anton, D. L., Shah, D. M., Duhl, D. N., and Giamei, A. F., JOM, 1217 (September 1989).Google Scholar
5.Meschter, P. J. and Schwartz, D. S., JOM, 5255 (November 1989).Google Scholar
6.Villars, P. and Calvert, L. D., Pearsons Handbook of Crystallographic Data for Intermetallics (ASM, Metals Park, OH, 1985), Vol. 2, pp. 3194 and 3200.Google Scholar
7. ASTM Nomenclature Subcommittee of Committee E-4 on Metallography, What can be done to improve alloy phase nomenclature?, ASTM Bulletin (December 1957), p. 27 (TP215).Google Scholar
8.Berry, L. G. and McClune, W. F., Powder Diffraction File (Joint Committee on Powder Diffraction Standards, U.S.A., 1967, 1979), cards 6582, 291362, and 351158.Google Scholar
9.Cullity, B. D., Elements of X-ray Diffraction (Addison-Wesley Publishing Co., 1967), Chaps. 4 and 13, Appendix 1.Google Scholar
10. for example: Kittel, C., Introduction to Solid State Physics, 5th ed. (John Wiley and Sons, New York, 1976), p. 32.Google Scholar
11.Horache, E., Feist, T. P., Stuart, J. A., and Fischer, J. E., J. Mater. Res. 5, 18871893 (1990).CrossRefGoogle Scholar