Hostname: page-component-7c8c6479df-7qhmt Total loading time: 0 Render date: 2024-03-28T11:09:44.725Z Has data issue: false hasContentIssue false

Enhanced power conversion efficiency of dye-sensitized solar cells with samarium doped TiO2 photoanodes

Published online by Cambridge University Press:  20 September 2017

Meihua Liu
Affiliation:
College of Materials Science and Engineering, Qingdao University of Science and Technology, Qingdao 266042, China
Yuchen Hou
Affiliation:
College of Materials Science and Engineering, Qingdao University of Science and Technology, Qingdao 266042, China
Xiaofei Qu*
Affiliation:
College of Materials Science and Engineering, Qingdao University of Science and Technology, Qingdao 266042, China
*
a) Address all correspondence to this author. e-mail: quxiaofei2008@hotmail.com
Get access

Abstract

In this study, TiO2 photoanodes doped with samarium ions via a method of hydrothermal treatment were used to fabricate dye-sensitized solar cells (DSSCs). Different doping concentrations were investigated on the effects of the cell’s performance. Some techniques including XRD, scanning electron microscopy, HRTEM, XPS, UV-Vis, photoluminescence were used to characterize the morphology, structure, and optic properties of the prepared photoanodes. The photovoltaic performance of the fabricated cells was further evaluated by measuring the current density–voltage (JV) curves. It was found that: (1) The down-conversion luminescence effect derived from samarium doping could enhance the light-harvesting ability. (2) Compared with the undoped sample, the samarium-doped cells exhibited enhanced photovoltaic performance. Among the cells with different doping concentrations, the cell TiO2:0.015 Sm showed the best power conversion efficiency of 6.08% with a high open-circuit voltage (V oc) and a short-circuit current density (J sc).

Type
Articles
Copyright
Copyright © Materials Research Society 2017 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

Contributing Editor: Xiaobo Chen

References

REFERENCES

Li, B., Wang, L., Kang, B., Wang, P., and Qiu, Y.: Review of recent progress in solid-state dye-sensitized solar cells. Sol. Energy Mater. Sol. Cells 90(5), 549573 (2006).Google Scholar
Rokhmat, M., Sutisna, , Wibowo, E., Khairurrijal, , and Abdullah, M.: Efficiency enhancement of TiO2, (active material) solar cell by inserting copper particles grown with pulse voltage electroplating method. J. Phys. Chem. Solids 100, 92100 (2017).CrossRefGoogle Scholar
O’Regan, B. and Gratzel, M.: A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films. Nature 353(6346), 737740 (1991).CrossRefGoogle Scholar
Kakiage, K., Tokutome, T., Iwamoto, S., Kyomen, T., and Hanaya, M.: Fabrication of a dye-sensitized solar cell containing a Mg-doped TiO2 electrode and a Br3−/Br redox mediator with a high open-circuit photovoltage of 1.21 V. Chem. Commun. 49(2), 179180 (2013).Google Scholar
Zhang, X., Wang, S.T., and Wang, Z.S.: Effect of metal-doping in TiO2 on fill factor of dye-sensitized solar cells. Appl. Phys. Lett. 99(11), 113503 (2011).CrossRefGoogle Scholar
Yao, N., Huang, J., Fu, K., Deng, X., Ding, M., Shao, M., and Xu, X.: Enhanced light harvesting of dye-sensitized solar cells with up/down conversion materials. Electrochim. Acta 154, 273277 (2015).Google Scholar
Wang, S., Zhou, X., Xiao, X., Fang, Y., and Lin, Y.: An increase in conversion efficiency of dye-sensitized solar cells using bamboo-type TiO2 nanotube arrays. Electrochim. Acta 116(2), 2630 (2014).Google Scholar
Wang, G., Xing, W., and Zhuo, S.: Nitrogen-doped mesoporous carbon as low-cost counter electrode for high-efficiency dye-sensitized solar cells. Electrochim. Acta 92(1), 269275 (2013).Google Scholar
Lu, H.L., Shen, T.F.R., Huang, S.T., Tung, Y.L., and Yang, T.C.K.: The degradation of dye sensitized solar cell in the presence of water isotopes. Sol. Energy Mater. Sol. Cells 95(7), 16241629 (2011).Google Scholar
Narayanaswamy, K., Swetha, T., Kapil, G., Pandey, S.S., Hayase, S., and Singh, S.P.: Simple metal-free dyes derived from triphenylamine for DSSC: A comparative study of two different anchoring group. Electrochim. Acta 169, 256263 (2015).Google Scholar
El-Sherbiny, D., Cheema, H., El-Essawy, F., Abdel-Megied, A., and El-Shafei, A.: Synthesis and characterization of novel carbazole-based terpyridyl photosensitizers for dye-sensitized solar cells (DSSCs). Dyes Pigm. 115, 8187 (2015).Google Scholar
Wang, X., Zhang, Y., Xu, Q., Xu, J., Wu, B., Gong, M., Chu, J., and Xiong, S.: A low-cost quasi-solid DSSC assembled with PVDF-based gel electrolyte plasticized by PC–EC & electrodeposited Pt counter electrode. J. Photochem. Photobiol., A 311, 112117 (2015).CrossRefGoogle Scholar
Cui, C., Qiu, Y., Zhao, J., Lu, B., Hu, H., Yang, Y., Ma, N., Xu, S., Xu, L., and Li, X.: A comparative study on the quantum-dot-sensitized, dye-sensitized and co-sensitized solar cells based on hollow spheres embedded porous TiO2 photoanodes. Electrochim. Acta 173, 551558 (2015).CrossRefGoogle Scholar
Wang, Z., Tang, Q., He, B., Chen, X., Chen, H., and Yu, L.: Titanium dioxide/calcium fluoride nanocrystallite for efficient dye-sensitized solar cell. A strategy of enhancing light harvest. J. Power Sources 275, 175180 (2015).CrossRefGoogle Scholar
Xu, P., Tang, Q., He, B., Li, Q., and Chen, H.: Transmission booster from SiO2 incorporated TiO2 crystallites: Enhanced conversion efficiency in dye-sensitized solar cells. Electrochim. Acta 134(21), 281286 (2014).CrossRefGoogle Scholar
Wang, K.P. and Teng, H.: Zinc-doping in TiO2 films to enhance electron transport in dye-sensitized solar cells under low-intensity illumination. Phys. Chem. Chem. Phys. 11(41), 94899496 (2009).CrossRefGoogle ScholarPubMed
Peng, T., Fan, K., Zhao, D., and Chen, J.: Enhanced energy conversion efficiency of Mg2+-modified mesoporous TiO2 nanoparticles electrodes for dye-sensitized solar cells. J. Phys. Chem. C 114(50), 2234622351 (2010).CrossRefGoogle Scholar
Hou, Q., Zheng, Y., Chen, J.F., Zhou, W., Deng, J., and Tao, X.: Visible-light-response iodine-doped titanium dioxide nanocrystals for dye-sensitized solar cells. J. Mater. Chem. 21(11), 38773883 (2011).Google Scholar
Ma, T., Akiyama, M., Abe, E., and Imai, I.: High-efficiency dye-sensitized solar cell based on a nitrogen-doped nanostructured titania electrode. Nano Lett. 5(12), 25432547 (2005).Google Scholar
Sun, Q., Zhang, J., Wang, P., Zheng, J., Zhang, X., Cui, Y., Feng, J., and Zhu, Y.: Sulfur-doped TiO2 nanocrystalline photoanodes for dye-sensitized solar cells. J. Renewable Sustainable Energy 4(2), 133137 (2012).Google Scholar
Shogh, S., Mohammadpour, R., Zad, A.I., and Taghavinia, N.: Improved photovoltaic performance of nanostructured solar cells by neodymium-doped TiO2 photoelectrode. Mater. Lett. 159, 273275 (2015).CrossRefGoogle Scholar
Wu, J., Xie, G., Lin, J., Lan, Z., Huang, M., and Huang, Y.: Enhancing photoelectrical performance of dye-sensitized solar cell by doping with europium-doped yttria rare-earth oxide. J. Power Sources 195(19), 69376940 (2010).Google Scholar
Wu, J., Wang, J., Lin, J., Lan, Z., Tang, Q., Huang, M., Huang, Y., Fan, L., Li, Q., and Tang, Z.: Enhancement of the photovoltaic performance of dye-sensitized solar cells by doping Y0.78Yb0.20Er0.02F3 in the photoanode. Adv. Energy Mater. 2(1), 7881 (2012).Google Scholar
Li, Q., Lin, J., Wu, J., Zhang, L., Yue, W., Peng, F., and Huang, M.: Enhancing photovoltaic performance of dye-sensitized solar cell by rare-earth doped oxide of Lu2O3:(Tm3+, Yb3+). Electrochim. Acta 56(14), 49804984 (2011).CrossRefGoogle Scholar
Mou, P., Pal, U., Jiménez, J.M.G.Y., and Pérez-Rodríguez, F.: Effects of crystallization and dopant concentration on the emission behavior of TiO2:Eu nanophosphors. Nanoscale Res. Lett. 7(1), 112 (2012).Google Scholar
Bingham, S. and Daoud, W.A.: Recent advances in making nano-sized TiO2 visible-light active through rare-earth metal doping. J. Mater. Chem. 21(7), 20412050 (2011).CrossRefGoogle Scholar
Grätzel, M.: Solar energy conversion by dye-sensitized photovoltaic cells. Inorg. Chem. 44(20), 68416851 (2005).Google Scholar
Abdul Gafoor, A.K., Thomas, J., Musthafa, M.M., and Pradyumnan, P.P.: Effects of Sm3+ doping on dielectric properties of anatase TiO2 nanoparticles synthesized by a low-temperature hydrothermal method. J. Electron. Mater. 40(10), 21522158 (2011).Google Scholar
Gao, C., Song, H., Hu, L., Pan, G., Qin, R., Wang, F., Dai, Q., Fan, L., Liu, L., and Liu, H.: Luminescence enhancement in bromine and samarium co-doped TiO2 semiconductor nanocrystalline powders. J. Lumin. 128(4), 559564 (2008).CrossRefGoogle Scholar
Hafez, H., Saif, M., and Abdel-Mottaleb, M.S.A.: Down-converting lanthanide doped TiO2 photoelectrodes for efficiency enhancement of dye-sensitized solar cells. J. Power Sources 196(13), 57925796 (2011).Google Scholar
Hsu, S.H., Li, C.T., Chien, H.T., Salunkhe, R.R., Suzuki, N., Yamauchi, Y., Ho, K.C., and Wu, K.C.: Platinum-free counter electrode comprised of metal-organic-framework (MOF)-derived cobalt sulfide nanoparticles for efficient dye-sensitized solar cells (DSSCs). Sci. Rep. 4, 6983 (2014).Google Scholar
Zhang, J., Peng, W., Chen, Z., Chen, H., and Han, L.: Effect of cerium doping in the TiO2 photoanode on the electron transport of dye-sensitized solar cells. J. Phys. Chem. C 116(36), 1918219190 (2012).CrossRefGoogle Scholar
Sleigh, C., Pijpers, A.P., Jaspers, A., Coussens, B., and Meier, R.J.: On the determination of atomic charge via ESCA including application to organometallics. J. Electron Spectrosc. Relat. Phenom. 77(1), 4157 (1996).Google Scholar
Uwamino, Y., Ishizuka, T., and Yamatera, H.: X-ray photoelectron spectroscopy of rare-earth compounds. J. Electron Spectrosc. Relat. Phenom. 34(1), 6778 (1984).Google Scholar
Cao, Y., Zhao, Z., Yi, J., Ma, C., Zhou, D., Wang, R., Li, C., and Qiu, J.: Luminescence properties of Sm3+-doped TiO2 nanoparticles: Synthesis, characterization, and mechanism. J. Alloys Compd. 554(2), 1220 (2013).Google Scholar
Zalas, M., Walkowiak, M., and Schroeder, G.: Increase in efficiency of dye-sensitized solar cells by porous TiO2 layer modification with gadolinium-containing thin layer. J. Rare Earths 29(8), 783786 (2011).Google Scholar
Chang, S.M., Lin, C.L., Chen, Y.J., Wang, H.C., Chang, W.C., and Lin, L.Y.: Improved photovoltaic performances of dye-sensitized solar cells with ZnO films co-sensitized by metal-free organic sensitizer and N719 dye. Org. Electron. 25, 254260 (2015).CrossRefGoogle Scholar
Li, Y.C., Chang, Y.H., Lin, Y.F., Chang, Y.S., and Lin, Y.J.: Synthesis and luminescent properties of Ln3+ (Eu3+, Sm3+, Dy3+)-doped lanthanum aluminum germanate LaAlGe2O7 phosphors. J. Alloys Compd. 439, 367375 (2007).Google Scholar
Liu, R., Qiang, L.S., Yang, W.D., and Liu, H.Y.: Enhanced conversion efficiency of dye-sensitized solar cells using Sm2O3-modified TiO2 nanotubes. J. Power Sources 223, 254258 (2013).Google Scholar
Lei, B.X., Zhang, P., Qiao, H.K., Zheng, X.F., Hu, Y.S., Huang, G.L., Sun, W., Sun, Z.F., and Zhang, X.X.: A facile template-free route for synthesis of anatase TiO2 hollow spheres for dye-sensitized solar cells. Electrochim. Acta 143, 129134 (2014).Google Scholar
Li, Z.Q., Que, Y.P., Mo, L.E., Chen, W.C., Ding, Y., Ma, Y.M., Jiang, L., Hu, L.H., and Dai, S.Y.: One-pot synthesis of mesoporous TiO2 microspheres and its application for high-efficiency dye-sensitized solar cells. ACS Appl. Mater. Interfaces 7(20), 1092810934 (2015).CrossRefGoogle ScholarPubMed
Lu, L., Li, R., Peng, T., Fan, K., and Dai, K.: Effects of rare earth ion modifications on the photoelectrochemical properties of ZnO-based dye-sensitized solar cells. Renewable Energy 36(12), 33863393 (2011).Google Scholar