Skip to main content

Equal channel angular pressing with rotating shear plane to produce hybrid materials with helical architecture of constituents

  • Rimma Lapovok (a1), Andrey Molotnikov (a2), Alexander Medvedev (a1) and Yuri Estrin (a3)

A modification of the metal processing technique known as equal channel angular pressing (ECAP) to incorporate shear plane rotation, called ECAP-R, is presented. The new process was developed to produce hybrid materials with helical architecture of their constituents, which holds promise to enable enhanced mechanical properties. The process was trialled experimentally using a specially designed laboratory-scale rig. It was shown that a positive mean stress (negative hydrostatic pressure) in a part of the multipiece billet leads to separation of the constituents within that region. A way to improving the process design was suggested based on finite element simulations. It was demonstrated that the proposed processing results in excellent bonding between the helical parts of the hybrid in the regions of positive hydrostatic pressure. Subsequent annealing gave rise to further improvement of the quality of bonding. Processing by ECAP-R at elevated temperatures was suggested as a viable method of producing hybrid materials with helical architecture.

Corresponding author
a) Address all correspondence to this author. e-mail:
Hide All

Contributing Editor: Mathias Göken

Hide All
1. Ashby, M.F.: Hybrids to fill holes in material property space. Philos. Mag. 85, 3235 (2005).
2. Ashby, M.F. and Bréchet, Y.J.M.: Designing hybrid materials. Acta Mater. 51(19), 5801 (2003).
3. Bouaziz, O., Brechet, Y., and Embury, J.D.: Heterogeneous and architectured materials: A possible strategy for design of structural materials. Adv. Eng. Mater. 10, 21 (2008).
4. Embury, J.D. and Bouaziz, O.: Steel-based composites. Annu. Rev. Mater. Res. 40, 213 (2010).
5. Bouaziz, O., Kim, H.S., and Estrin, Y.: Architecturing of metal-based composites with concurrent nanostructuring: A new paradigm of materials design. Adv. Eng. Mater. 15, 336 (2013).
6. Valiev, R.Z., Zehetbauer, M.J., Estrin, Y., Hoppel, H.W., Ivanisenko, Y., Hahn, H., Wilde, G., Roven, H.J., Sauvage, X., and Langdon, T.G.: The innovation potential of bulk nanostructured materials. Adv. Eng. Mater. 9(7), 527 (2007).
7. Valiev, R.Z., Estrin, Y., Horita, Z., Langdon, T.G., Zechetbauer, M.J., and Zhu, Y.T.: Producing bulk ultrafine-grained materials by severe plastic deformation. JOM 58, 33 (2006).
8. Bachmaier, A. and Pippan, R.: Generation of metallic nanocomposites by severe plastic deformation. Int. Mater. Rev. 58(1), 41 (2013).
9. Raabe, D., Choi, P-P., Li, Y., Kostka, A., Sauvage, X., Lecouturier, F., Hono, K., Kirchheim, R., Pippan, R., and Embury, D.: Metallic composites processed via extreme deformation: Toward the limits of strength in bulk materials. MRS Bull. 35, 982 (2010).
10. Lapovok, R., Qi, Y., Ng, H.P., Maier, V., and Estrin, Y.: Multicomponent materials from machining chips compacted by equal-channel angular pressing. J. Mater. Sci. 49(3), 1193 (2014).
11. Beygelzimer, Y., Estrin, Y., and Kulagin, R.: Synthesis of hybrid materials by severe plastic deformation: A new paradigm of SPD processing. Adv. Eng. Mater. 17, 1853 (2015).
12. Wainright, S.A., Biggs, W.D., Currey, J.D., and Gosline, J.M.: Mechanical Design in Organisms (Edward Arnold Publishers, London, 1976).
13. Fengel, D. and Wegener, G.: Wood-Chemistry (De Gruyter, Berlin, 1984).
14. Zhang, T., Ma, Y., Chen, K., Kunz, M., Tamura, N., Qiang, M., Xu, J., and Qi, L.: Structure and mechanical: Properties of a pteropod shell consisting of interlocked helical aragonite nanofibers. Angew. Chem., Int. Ed. 50(44), 10361 (2011).
15. Bouaziz, O., Allain, S., Barcelo, D., and Niang, R.: Strengthening by plastic corrugated reinforcements: An effective way for strain-hardening improvement by architecture. In Architectured Multifunctional Materials, Brechet, Y.J.M., Embury, J.D., and Onck, P.R., eds. (Materials Research Society Symposia Proceedings 1188, San Francisco, USA, 2009), pp. 111115.
16. Khoddam, S., Estrin, Y., Kim, H.S., and Bouaziz, O.: Torsional and compressive behaviours of a hybrid material: Spiral fibre reinforced metal matrix composite. Mater. Des. 85, 404 (2015).
17. Latypov, M.I., Beygelzimer, Y., Kulagin, R., Varyukhin, V., and Kim, H.S.: Toward architecturing of metal composites by twist extrusion. Mater. Res. Lett. 3, 161 (2015).
18. Beygelzimer, Y., Kulagin, R., and Estrin, Y.: Severe plastic deformation as a way to produce architectured materials. In Architectured Materials, Estrin, Y., Dunlop, J., Brechet, Y., Fratzl, P., Dendievel, R., eds. (Springer, Heidelberg, Germany). (in press).
20. Lapovok, R.: The role of back-pressure in equal channel angular extrusion. J. Mater. Sci. 40(2), 341 (2005).
21. Blau, P.J.: Friction Science and Technology: From Concepts to Applications (CRC Press, Boca Raton, Florida, 2008).
22. Hug, E. and Bellido, N.: Brittleness study of intermetallic (Cu, Al) layers in copper-clad aluminium thin wires. J. Mater. Sci. Eng. A 528, 7103 (2011).
Recommend this journal

Email your librarian or administrator to recommend adding this journal to your organisation's collection.

Journal of Materials Research
  • ISSN: 0884-2914
  • EISSN: 2044-5326
  • URL: /core/journals/journal-of-materials-research
Please enter your name
Please enter a valid email address
Who would you like to send this to? *



Full text views

Total number of HTML views: 16
Total number of PDF views: 60 *
Loading metrics...

Abstract views

Total abstract views: 210 *
Loading metrics...

* Views captured on Cambridge Core between 11th September 2017 - 17th March 2018. This data will be updated every 24 hours.