Hostname: page-component-848d4c4894-xm8r8 Total loading time: 0 Render date: 2024-06-14T20:59:46.442Z Has data issue: false hasContentIssue false
  • English
  • Français

Influence of surface hardening by laser irradiation on the loss factor of cast iron

Published online by Cambridge University Press:  31 January 2011

Hiromasa Adachi ,
Yoshihiko Masuo  and
Teruo Hasegawa
Hiromasa Adachi
Affiliation:
Nagoya Municipal Industrial Research Institute, 3–4-41 Rokuban, Atsuta-ku, Nagoya 456, Japan
Yoshihiko Masuo
Affiliation:
Nagoya Municipal Industrial Research Institute, 3–4-41 Rokuban, Atsuta-ku, Nagoya 456, Japan
Teruo Hasegawa
Affiliation:
Nagoya Municipal Industrial Research Institute, 3–4-41 Rokuban, Atsuta-ku, Nagoya 456, Japan
Get access

Abstract

Surface hardening by laser irradiation was examined regarding the loss factor, which is the parameter of the vibration-damping characteristics, for flake graphite cast irons and spherical graphite cast irons. The surface of the samples was quenched by changing speed of beam, gas pressure, and beam frequency. It was found that the depth of the hardening region was from 0.12 mm to 1.11 mm, and the hardness of the boundary between the hardening and the nonhardening regions changed suddenly. It was confirmed that the loss factor of the laser hardened specimens increased considerably as compared with that of the as-cast specimens. The internal friction at the vicinity of the boundary between the hardening and the nonhardening regions may be responsible for this result.

Type
Articles
Information
Journal of Materials Research , Volume 13 , Issue 6 , June 1998 , pp. 1656 - 1659
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Hotta, H., J. Jpn. Found. Eng. Soc. 33, 155 (1961).Google Scholar
2.Ogawa, H., Nishino, Y., and Asano, S., J. Jpn. Ins. Metals 60, 377 (1996).CrossRefGoogle Scholar
3.Kenjo, S., Nishino, Y., and Asano, S., J. Jpn. Ins. Metals 60, 952 (1996).CrossRefGoogle Scholar
4.Kawasumi, H., Technocrat 11 (6), 11 (1973).Google Scholar
5.Seaman, F. D. and Gnanamuthu, D. S., Metal Progress 8, 67 (1975).Google Scholar
6.Gnanamuthu, D. S., Opt. Eng. 19 (5), 783 (1980).CrossRefGoogle Scholar
7.Mazumder, J., J. Metals 5, 18 (1983).Google Scholar
8.Beranek, L. L., Noise and Vibration Control (McGraw-Hill, New York, 1960).Google Scholar
9.Nishino, Y. and Asano, S., Phys. Status Solidi (a), 139, K97 (1993).CrossRefGoogle Scholar
10.Oberst, H., Akustische Beihefte 4, 181 (1952).Google Scholar