Hostname: page-component-76fb5796d-vfjqv Total loading time: 0 Render date: 2024-04-28T15:05:52.324Z Has data issue: false hasContentIssue false
  • English
  • Français

Joining of Ti3SiC2 with Ti–6Al–4V Alloy

Published online by Cambridge University Press:  31 January 2011

N.F. Gao  and
Y. Miyamoto
N.F. Gao
Affiliation:
Joining –1, Mihogaoka, Ibaraki,Osaka 567–0047, Japan
Y. Miyamoto
Affiliation:
Joining –1, Mihogaoka, Ibaraki,Osaka 567–0047, Japan
Get access

Abstract

The joining of a Ti3SiC2 ceramic with a Ti–6Al–4V alloy was carried out at the temperature range of 1200–1400 °C for 15 min to 4 h in a vacuum. The total diffusion path of joining was determined to be Ti3SiC2/Ti5Si3Cx/Ti5Si3Cx + TiCx/TiCx/Ti. The reaction was rate controlled by the solid-state diffusion below 1350 °C and turned to the liquid-state diffusion controlled with a dramatic increase of parabolic rate constant Kp when the temperature exceeded 1350 °C. The TiCx tended to grow at the boundarywith the Ti–6Al–4V alloy at a higher temperature and longer holding time. TheTi3SiC2/Ti–6Al–4V joint is expected to be applied to implant materials.

Type
Articles
Information
Journal of Materials Research , Volume 17 , Issue 1 , January 2002 , pp. 52 - 59
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Barsoum, M.W. and El, T.-Raghy, J. Mater. Synth. Proc. 5, 197 (1997).Google Scholar
Gao, N.F., Miyamoto, Y., and Zhang, D., J. Mater. Sci. 34, 4385 (1999).CrossRefGoogle Scholar
Gilbert, C.J., Bloyer, D.R., Barsoum, M.W., El-Raghy, T., Tomsia, A.P., and Ritchie, R.O., Scripta Mater. 42, 761 (2000).CrossRefGoogle Scholar
El-Raghy, T. and Barsoum, M.W., J. Appl. Phys. 83, 112 (1998).CrossRefGoogle Scholar
Gao, N.F., Oonishi, O., Zhang, D., and Miyamoto, Y. (submitted, 2001).Google Scholar
Wakelkamp, W.J.J., Loo, F.J.J. van, and Metselaar, R., J. Eur. Ceram. Soc. 8, 135 (1991).CrossRefGoogle Scholar
Witthaut, M., Weiß, R, Zimmermann, E., Richthofen, A.V., and Neuschütz, D., Z. Metallkd. 89, 623 (1998).Google Scholar
Zhang, L.T., Wu, J.S., Hua, W., and Qiu, G.H., Intermetallics 8, 709 (2000).CrossRefGoogle Scholar
Tzenov, N., Barsoum, M.W., and El-Raghy, T., J. Eur. Ceram. Soc. 20, 801 (2000).CrossRefGoogle Scholar
Ratliff, J.L. and Powell, G.W., AFML Tech. Rep. (National Tech. Info. Service, Alexandria, VA, 1970), p. 70.Google Scholar
Arunajatesan, S. and Carim, A.H., J. Am. Ceram. Soc. 78, 667 (1995).CrossRefGoogle Scholar
Racault, C., Langlais, F., and Bernard, C., J. Mater. Sci. 29, 5023 (1994).CrossRefGoogle Scholar
Du, Y., Schuster, J.C., Seifert, H.J., and Aldinger, F., J. Am. Ceram. Soc. 83, 197 (2000).CrossRefGoogle Scholar
Naka, M., Feng, J.C., and Schuster, J.C., Metall. Mater. Trans. A 28, 1385 (1997).CrossRefGoogle Scholar
Tokita, M., in Development of Large-size Ceramic/metal Bulk FGM Fabricated by Sparking plasma Sintering, edited by Kaysser, W.A., (Proc. 5th Int. Symp. Functionally Graded Materials, Trans Tech Publications Ltd., Zurich, Switzerland, 1999), p. 83.Google Scholar
Li, J.F., Sato, F., and Watanabe, R., J. Mater. Sci. 18, 1595 (1999).Google Scholar
Kosolapova, T.Y., Handbook of High Temperature Compounds: Properties, Production, Application (Hemisphere Publishing, New York, 1990), p. 392.Google Scholar
Touloukian, Y.S., Thermal Expansion, Nonmetallic Solids, Thermophysical Properties of Matter, (Plenum, New York, 1975), Vol. 12.Google Scholar
Alekseev, A.G. et al. , Handbook of Highly Refractory Elements and Compounds (Metallurgiya, Moscow, 1986), p. 335.Google Scholar
Cockeram, B.V. and Rapp, R.A., Metall. Mater. Trans. A 26, 777 (1995).CrossRefGoogle Scholar
Fromhold, A.T. and Sato, N., Oxid. Mater. 16, 203 (1981).CrossRefGoogle Scholar
Thom, A.J., Young, V.G., and Akinc, M., J. Alloys Compd. 296, 59 (2000).CrossRefGoogle Scholar
Storms, E.K., The Refractory Carbides, edited by Margrave, J.L., (Academic Press, New York, 1967), p. 9.Google Scholar
Cockeram, B.V. and Wang, G., Thin Solid Films 269, 57 (1995).CrossRefGoogle Scholar
Zimmermann, E., Weiß, R., Witthaut, M., and Neuschu¨tz, D., Z. Metallkd. 89, 714 (1998).Google Scholar
Vahlas, C., Chevalier, P.Y., and Blanquet, E., Calphad 13, 273 (1989).CrossRefGoogle Scholar