Hostname: page-component-cb9f654ff-5kfdg Total loading time: 0 Render date: 2025-08-24T02:57:46.484Z Has data issue: false hasContentIssue false
  • English
  • Français

Magnesium reduction of WO3 in a self-propagating high-temperature synthesis (SHS) process

Published online by Cambridge University Press:  03 March 2011

Seog Gueon Ko ,
Chang Whan Won ,
Byong Sun Chun  and
H.Y. Sohn
Seog Gueon Ko
Affiliation:
Engineering Research Center for Rapidly Solidified Materials, Chungnam National University, Daejeon 305-764, Korea
Chang Whan Won
Affiliation:
Engineering Research Center for Rapidly Solidified Materials, Chungnam National University, Daejeon 305-764, Korea
Byong Sun Chun
Affiliation:
Engineering Research Center for Rapidly Solidified Materials, Chungnam National University, Daejeon 305-764, Korea
H.Y. Sohn
Affiliation:
Department of Metallurgical Engineering, University of Utah, Salt Lake City, Utah 841112-1183
Get access

Abstract

High-purity tungsten was prepared by the self-propagating high-temperature synthesis (SHS) process from a mixture of WO3 and Mg. The MgO in the product was leached with an HCl solution. The complete reduction of WO3 required a 33% excess of magnesium over the stoichiometric molar ratio Mg/WO3 of 3. The product tungsten had a purity of 99.980% which was higher than that of the reactant WO3. This is because the impurities were either volatilized at the high temperatures generated during the rapid exothermic reaction or dissolved into the HCl solution during leaching.

Information

Type
Communication
Information
Journal of Materials Research , Volume 10 , Issue 4 , April 1995 , pp. 795 - 797
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

1Bailar, J. C. and Emeleus, H. J., Comprehensive Inorganic Chemistry 3, 742–769 (1973).Google Scholar
2Rollinson, C. L., The Chemistry of Chromium, Molybdenum and Tungsten (Pergamon Press, Oxford, 1973).Google Scholar
3Ouabdesselam, M. and Munir, Z. A., J. Mater. Sci. 22, 1799–1807 (1987).CrossRefGoogle Scholar
4Holt, J. B., in Engineered Materials Handbook, Vol. 4, edited by Schneider, S. J. Jr. (ASM INTERNATIONAL, Metals Park, OH, 1991), pp. 227–231.Google Scholar
5Munir, Z. A., Ceram. Bull. 67, 342–349 (1988).Google Scholar
6Hardt, A. P. and Phung, P. V., Combustion and Flame 21, 77–89 (1973).CrossRefGoogle Scholar
7Rao, C. N.R., Chemistry of Advanced Materials (Blackwell Scientific Pub., Oxford, England, 1993), pp. 20–254.Google Scholar