Hostname: page-component-8448b6f56d-sxzjt Total loading time: 0 Render date: 2024-04-20T03:02:50.059Z Has data issue: false hasContentIssue false
  • English
  • Français

Measurement and analysis of friction and wear on electrodeposited coatings against a high carbon chrome steel ball

Published online by Cambridge University Press:  06 January 2016

Kyungmok Kim
Kyungmok Kim*
Affiliation:
Department of Aerospace Engineering, School of Aerospace and Mechanical Engineering, Korea Aerospace University, Goyang-si, Gyeonggi-do 412-791, Republic of Korea
*
a)Address all correspondence to this author. e-mail: kkim@kau.ac.kr
Get access

Abstract

This paper investigates friction and wear between an electro-deposited coating and high carbon chrome steel. A ball-on-flat plate tribometer was developed, measuring tangential and normal displacements of a high carbon chrome steel ball. For the purpose of measuring displacements of a ball, laser displacement sensors were used. An electro-deposited coating was applied to a cold-rolled high strength steel plate. Displacement amplitudes of 0.2 and 1.0 mm were imposed to produce fretting and reciprocal sliding at contact. A steady-state value of the kinetic friction coefficient between an electro-deposited coating and high carbon chrome steel was found to be about 0.28. It was identified that wear volume on a coated specimen increased with the number of cycles. Correlation between the wear volume and a normal displacement of a ball was found to be linear. It was demonstrated that the proposed method is useful for understanding friction and wear of an electro-deposited coating.

Keywords

electrodepositionsteelcoating
Type
Articles
Information
Journal of Materials Research , Volume 31 , Issue 13: Focus Issue: Advances and Challenges in Carbon-based Tribomaterials , 14 July 2016 , pp. 1865 - 1872
Copyright
Copyright © Materials Research Society 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Alkire, R.C. and Kolb, D.M.: Advances in Electrochemical Science and Engineering, Vol. 7, 1st ed. (Wiley-VCH Verlag, Weinheim, Germany, 2002); pp. 193–223.Google Scholar
Fettis, G.: Automotive Paints and Coatings, 1st.ed. (VCH, Weinheim, Germany, 1995); pp. 38–60.Google Scholar
Kim, K.: A study on the frictional characteristics of metal and ceramic counterfaces against electro-deposited coatings for use on automotive seat rails. Wear 320, 62 (2014).CrossRefGoogle Scholar
Redlich, M., Gorodnev, A., Feldman, Y., Kaplan-Ashiri, I., Tenne, R., Fleischer, N., Genut, M., and Feuerstein, N.: Friction reduction and wear resistance of electro-co-deposited inorganic fullerene-like WS2 coating for improved stainless steel orthodontic wires. J. Mater. Res. 23(11), 2909 (2008).CrossRefGoogle Scholar
Chen, A.M., Pingsuthiwong, C., and Golden, T.D.: Electrodeposition of diamondlike carbon films on nickel substrates. J. Mater. Res. 18(7), 1561 (2003).CrossRefGoogle Scholar
Ray, S.C., Bose, B., Chiou, J.W., Tsai, H.M., Jan, J.C., Kumar, K., Pong, W.F., DasGupta, D., Fanchini, G., and Tagliaferro, A.: Deposition and characterization of diamond-Like carbon thin films by electro-deposition technique using organic liquid. J. Mater. Res. 19(4), 1126 (2004).CrossRefGoogle Scholar
Wasekar, N.P. and Sundararajan, G.: Sliding wear behavior of electrodeposited Ni-W alloy and hard chrome coatings. Wear 342–343, 340 (2015).CrossRefGoogle Scholar
Bengoa, L.N., Tuckart, W.R., Zabala, N., Prieto, G., and Egli, W.A.: Tin coatings electrodeposited from sulfonic acid-based electrolytes: Tribological behavior. J. Mater. Eng. Perform. 24, 2274 (2015).CrossRefGoogle Scholar
Iacovetta, D., Tam, J., and Erb, U.: Synthesis, structure, and properties of superhydrophobic nickel–PTFE nanocomposite coatings made by electrodeposition. Surf. Coat. Technol. 279, 134 (2015).CrossRefGoogle Scholar
Sandstrom, P.W., Sridharanan, K., and Conrad, J.R.: A machine for fretting wear testing of plasma surface modified materials. Wear 166, 163 (1993).CrossRefGoogle Scholar
Fouvry, S., Kapsa, P., and Vincent, L.: Analysis of sliding behaviour for fretting loadings: Determination of transition criteria. Wear 185, 35 (1995).CrossRefGoogle Scholar
Varenberg, M., Etsion, I., and Halperin, G.: Slip index: A new unified approach to fretting. Tribol. Lett. 17(3), 569 (2004).CrossRefGoogle Scholar
Bhushan, B.: Introduction to Tribology, 1st ed. (John Wiley & Sons, Inc., New York, USA, 2002); pp. 646–651.Google Scholar
Hills, D. and Nowell, D.: Mechanics of Fretting Fatigue, 1st ed. (Kluwer Academic Publishers, Dordrecht, Germany, 1994); p. 61.CrossRefGoogle Scholar
Korsunsky, A.M., Torosyan, A.R., and Kim, K.: Development and characterization of low friction coatings for protection against fretting wear in aerospace components. Thin Solid Films 516, 5690 (2008).CrossRefGoogle Scholar
Williams, J.A.: Engineering Tribology, 1st ed. (Oxford Science Publications, Oxford, England, 1994); pp. 147–149.Google Scholar
Vingsbo, O. and Soderberg, M.: On fretting maps. Wear 126, 131 (1988).CrossRefGoogle Scholar
Fouvry, S., Duóa, P., and Perruchaut, Ph.: A quantitative approach of Ti–6Al–4V fretting damage: Friction, wear and crack nucleation. Wear 257, 916 (2004).CrossRefGoogle Scholar