Skip to main content
×
Home
    • Aa
    • Aa

Mechanisms of ceramic coating deposition in solution-precursor plasma spray

  • Tania Bhatia (a1), Alper Ozturk (a2), Liangde Xie (a1), Eric H. Jordan (a2), Baki M. Cetegen (a2), Maurice Gell (a1), Xinqin Ma (a3) and Nitin P. Padture (a1)...
Abstract

The solution-precursor plasma spray (SPPS) method is a new process for depositing thick ceramic coatings, where solution feedstock (liquid) is injected into a plasma. This versatile method has several advantages over the conventional plasma spray method, and it can be used to deposit nanostructured, porous coatings of a wide variety of oxide and non-oxide ceramics for a myriad of possible applications. In an effort to understand the SPPS deposition process, key diagnostic and characterization experiments were performed on SPPS coatings in the Y2O3-stabilized ZrO2 (YSZ) system. The results from these experiments show that there are multiple pathways to SPPS coating formation. The atomized precursor droplets undergo rapid evaporation and breakup in the plasma. This is followed by precipitation, gelation, pyrolysis, and sintering. The different types of particles reach the substrate and are bonded to the substrate or the coating by sintering in the heat of the plasma. The precursor also reaches the substrate or the coating. This precursor pyrolyzes in situ on the substrate, either after it reaches a “cold” substrate or upon contact on a “hot” substrate and helps bond the particles. The coating microstructure evolves during SPPS deposition as the coating temperature reaches approximately 770 °C.

Copyright
Linked references
Hide All

This list contains references from the content that can be linked to their source. For a full set of references and notes please see the PDF or HTML where available.

6. J. Karthikeyan , C.C. Berndt , S. Reddy , J-Y. Wang , A.H. King , and H. Herman , J. Am. Ceram. Soc. 81, 121 (1998).

8. N.P. Padture , K.W. Schlichting , T. Bhatia , A. Ozturk , B. Cetegen , E.H. Jordan , M. Gell , S. Jiang , T.D. Xiao , P.R. Strutt , E. Garcia , P. Miranzo , and M.I. Osendi , Acta Mater. 49, 2251 (2001).

9. S.D. Parukuttyamma , J. Margolis , H. Liu , C.P. Grey , S. Sampath , H. Herman , and J.B. Parise , J. Am. Ceram. Soc. 84, 1906 (2001).

10. E. Bouyer , G. Schiller , M. Mueller , and R.H. Henne , Appl. Organomet. Chem. 15, 833 (2001).

12. N.P. Padture , M. Gell , and E.H. Jordan , Science 296, 280 (2002).

13. R.A. Dobbins and C.M. Megaridis , Langmuir 3, 254 (1987).

15. C.H. Liebert , Thin Solid Films 53, 235 (1978).

16. V. Jayaram , M. deGraef , and C.G. Levi , Acta Mater. 42, 1829 (1994).

20. G.L. Messing , S-C. Zhang , and G.V. Jayanthi , J. Am. Ceram. Soc. 76, 2707 (1993).

21. S. Semenov and B. Cetegen , J. Therm. Spray Technol. 10, 326 (2001).

22. C.K. Chan , R.C. Flagan , and J.H. Seinfeld , J. Am. Ceram. Soc. 81, 646 (1998).

Recommend this journal

Email your librarian or administrator to recommend adding this journal to your organisation's collection.

Journal of Materials Research
  • ISSN: 0884-2914
  • EISSN: 2044-5326
  • URL: /core/journals/journal-of-materials-research
Please enter your name
Please enter a valid email address
Who would you like to send this to? *
×

Metrics

Full text views

Total number of HTML views: 0
Total number of PDF views: 33 *
Loading metrics...

Abstract views

Total abstract views: 155 *
Loading metrics...

* Views captured on Cambridge Core between September 2016 - 24th May 2017. This data will be updated every 24 hours.