Hostname: page-component-848d4c4894-hfldf Total loading time: 0 Render date: 2024-05-16T00:43:27.862Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation of nanostructured titanium carbonitride particles by Mg-thermal reduction

Published online by Cambridge University Press:  01 April 2005

D.W. Lee ,
J.H. Ahn  and
B.K. Kim
D.W. Lee
Affiliation:
Nano P/M Group, Korea Institute of Machinery and Materials (KIMM), Kyungnam 641-010, Korea
J.H. Ahn
Affiliation:
Division of Chemical & Materials Engineering, Ajou University, Kyoungki 441-749, Korea
B.K. Kim
Affiliation:
Nano P/M Group, Korea Institute of Machinery and Materials (KIMM), Kyungnam 641-010, Korea
Get access

Abstract

Nanostructured titanium carbonitride (TiC0.5N0.5) powders were synthesized by a Mg-thermal reduction process. The evaporated liquid solution made from TiCl4 + ¼C2Cl4 reacted with liquid magnesium protected with nitrogen gas. The extremely fine titanium carbonitride particles of about 50 nm were successfully produced by the reaction of Ti and C atoms released from chloride reduction with liquid magnesium and nitrogen gas. After the reduction process, the residual phases of MgCl2 and the excess Mg were removed by mechanical vacuum conditions. To obtain the maximized stoichiometry of product, the process optimization with thermodynamic study was performed with various experimental parameters such as reaction temperatures and solution feeding rates.

Keywords

CeramicNanoparticlePowder metallurgy
Type
Research Article
Information
Journal of Materials Research , Volume 20 , Issue 4 , April 2005 , pp. 844 - 849
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Richter, V. and Ruthendorf, M.V.: On hardness and toughness of ultrafine and nanocrystalline hard materials. J. Ref. Met. Mater. 17, 141 (1999).Google Scholar
2. Bergmann, E., Kaufmann, H., Schmid, R. and Vogel, J.: Ion-plated titanium carbonitride films. Surf. Coat. Technol. 42, 237 (1990).CrossRefGoogle Scholar
3. Zhang, S.: Titanium carbonitride-based ceramics: processes and properties. Mater. Sci. Eng. A 163, 141 (1993).CrossRefGoogle Scholar
4. Alexeev, N.V., Balikhin, I.L., Kurkhin, E.N., Samokhin, A.V., Troiskaya, E.V. and Troiskij, V.N.: Synthesis of titanium nitride and carbonitride ultra-fine powders from titanium hydride in nitrogen arc discharge plasma jet. Fizika i Khimiya Obrabotki Materialov. 1, 247 1995 .Google Scholar
5. Licko, T., Figusch, V. and Puchyiva, J.: Carbothermal reduction and nitriding of TiO2 . J. Eur. Ceram. Soc. 5(4), 257 (1989).CrossRefGoogle Scholar
6. Xiang, J., Xie, Z., Huang, Y. and Xiao, H.: Synthesis of Ti(C,N) ultrafine powders by carbothermal reduction of TiO2 . J. Eur. Ceram. Soc. 20, 933 (2000).CrossRefGoogle Scholar
7. Parkhomenko, V.D., Serdyuk, G.N. and Kransnokutskii, Yu.I.: Kinetics of formation of titanium carbonitride at high temperatures. Phys. & Chem. Mater. Treat. 20(5), 429 (1986).Google Scholar
8. Rauschenbach, B.: Formation of compounds by high-flux nitrogen implantation in titanium. J. Mater. Sci. 21(2), 395 (1986).CrossRefGoogle Scholar
9. Eslamloo-Grami, M. and Munir, Z.A.: Mechanism of combustion synthesis of titanium carbonitride. J. Mater. Res. 11, 2968 (1996).Google Scholar
10. Elger, G.W., Traut, D.E., Slavens, G.J. and Gerdemann, S.J.: Preparation of submicron titanium nitride by vapor-phase reactions. Metall. Trans. B 20B, 493 (1989).CrossRefGoogle Scholar
11. Preiss, H., Berger, L-M. and Schultze, D.: Studies on the carbothermal preparation of titanium carbide from different gel precursors. J. Eur. Ceram. Soc. 19, 195 (1999).CrossRefGoogle Scholar
12. Lee, D.W. and Kim, B.K.: Synthesis of nano-structured titanium carbide by Mg-thermal reduction. Scrip. Mater. 48, 1513 (2003).CrossRefGoogle Scholar
13. Zakharevich, A.A., Barenikova, V.M. and Alexandrovskij, S.V.: The effect of titanium tetra chloride flow rate on the structure and quality of titanium sponge. Tsvetn. Met. 7, 48 (1985).Google Scholar
14. Turchanin, A.G., Babenko, C.A. and Polesuk, V.C.: Enthalpy and heat capacity of cubic titanium carbonitride at 298∼1500 K. J. Phys. Chem. 56, 41 (1982).Google Scholar
15. Paster, H.: Titanium-carbonitride-based hard alloys for cutting tools. Mater. Sci. Eng. A 105(106), 401 (1988).CrossRefGoogle Scholar
16. Kulikov, I.C.: Thermodynamics of Carbides and Nitrides (Academy of Science Press, Cheliavinsk, Russia, 1988), p. 320.Google Scholar