Skip to main content
×
×
Home

Sound absorption properties of porous composites fabricated by a hydrogel templating technique

  • Marius Rutkevičius (a1), Georg H. Mehl (a1), Vesselin N. Paunov (a1), Qin Qin (a2), Philip A. Rubini (a2), Simeon D. Stoyanov (a3) and Jordan Petkov (a4)...
Abstract

We have used a hydrogel templating technique followed by the subsequent evaporation of water present to fabricate porous cement and porous PDMS composites, and we have analyzed their sound absorption properties. All experiments were carried out with hydrogel slurries of broad bead size distributions. Porous PDMS and cement composites were produced with porosities of up to 80% and 70%, respectively. Scanning electron microscope analysis shows fibrous domains within the voids created by the hydrogel in the cement samples and open pore network in the PDMS composites of initial hydrogel content higher than 70 vol%. Sound absorption was improved with respect to control nonporous samples in all composites with porosities higher than 60 vol%, where an open pore structure was formed. The porous PDMS and porous cement produced by this method show better sound absorption at 200–400 Hz and 1200–1800 Hz frequency ranges when compared with the sound absorption in the intermediate frequencies range between 400 and 1000 Hz.

Copyright
Corresponding author
a)Address all correspondence to these authors. e-mail: M.Rutkevicius@hull.ac.uk
b)e-mail: V.N.Paunov@hull.ac.uk
References
Hide All
1.Passchier-Vermeer, W. and Passchier, W.F.: Noise exposure and public health. Environ. Health Perspect. 108, 123 (2000).
2.Arenas, J.P. and Crocker, M.J.: Recent trends in porous sound-absorbing materials. J. Sound Vib. 44(7), 12 (2010).
3.Beranek, L.L. and Vér, I.L.: Noise and Vibration Control Engineering: Principles and Applications (John Wiley & Sons, New York, NY, 1992).
4.Crocker, M.J.: Handbook of Noise and Vibration Control (John Wiley & Sons, Hoboken, NJ, 2007).
5.Kidner, M.R.F. and Hansen, C.H.: A comparison and review of theories of the acoustics of porous materials. Int. J. Acoust. Vibr. 13(3), 112 (2008).
6.Delany, M.E. and Bazley, E.N.: Acoustical properties of fibrous absorbent materials. Appl. Acoust. 3(2), 105 (1970).
7.Cox, T.J. and D'Antonio, P.: Acoustic Absorbers and Diffusers: Theory, Design and Application (Taylor & Francis, London, UK, 2004).
8.Fahy, F.J.: Foundations of Engineering Acoustics (Elsevier Science, London, UK, 2000).
9.Atalla, N., Panneton, R., Sgard, F.C., and Olny, X.: Acoustic absorption of macro-perforated porous materials. J. Sound Vib. 243(4), 659 (2001).
10.Cuiyun, D., Guang, C., Xinbang, X., and Peisheng, L.: Sound absorption characteristics of a high-temperature sintering porous ceramic material. Appl. Acoust. 73(9), 865 (2012).
11.Najib, N.N., Ariff, Z.M., Bakar, A.A., and Sipaut, C.S.: Correlation between the acoustic and dynamic mechanical properties of natural rubber foam: Effect of foaming temperature. Mater. Des. 32(2), 505 (2011).
12.Ng, Y.H. and Hong, L.: Acoustic attenuation characteristics of surface-modified polymeric porous microspheres. J. Appl. Polym. Sci. 102(2), 1202 (2006).
13.Yilmaz, N.D., Banks-Lee, P., Powell, N.B., and Michielsen, S.: Effects of porosity, fiber size, and layering sequence on sound absorption performance of needle-punched nonwovens. J. Appl. Polym. Sci. 121(5), 3056 (2011).
14.Olms, H. and Breuer, B.: Tire/road-noise trailer measurements with the close-proximity method under variation of accelerating and braking torque. Inter-Noise 99: Proceedings of the 1999 International Congress on Noise Control Engineering, Vols. 13, 1999. p. 213.
15.Kang, J. and Brocklesby, M.W.: Feasibility of applying micro-perforated absorbers in acoustic window systems. Appl. Acoust. 66(6), 669 (2005).
16.Kim, H.K., Jeon, J.H., and Lee, H.K.: Workability, and mechanical, acoustic and thermal properties of lightweight aggregate concrete with a high volume of entrained air. Constr. Build. Mater. 29(0), 193 (2012).
17.Van Vliet, K., Pellenq, R., Buehler, M.J., Grossman, J.C., Jennings, H., Ulm, F-J., and Yip, S.: Set in stone? A perspective on the concrete sustainability challenge. MRS Bull. 37(04), 395 (2012).
18.Rutkevičius, M., Munusami, S.K., Watson, Z., Field, A.D., Salt, M., Stoyanov, S.D., Petkov, J., Mehl, G.H., and Paunov, V.N.: Fabrication of novel lightweight composites by a hydrogel templating technique. Mater. Res. Bull. 47(4), 980 (2012).
19.ISO 10534-1: Acoustics: Determination of Sound Absorption Coefficient and Impedance in Impedance Tubes. Part 1: Method Using Standing Wave Ratio (International Standards Organisation, Geneva, Switzerland, 1996).
20.Alford, N.M. and Rahman, A.A.: An assesment of porosity and pore sizes in hardened cement pastes. J. Mater. Sci. 16(11), 3105 (1981).
Recommend this journal

Email your librarian or administrator to recommend adding this journal to your organisation's collection.

Journal of Materials Research
  • ISSN: 0884-2914
  • EISSN: 2044-5326
  • URL: /core/journals/journal-of-materials-research
Please enter your name
Please enter a valid email address
Who would you like to send this to? *
×

Metrics

Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed