Skip to main content
×
×
Home

Stability of organic solar cells with PCDTBT donor polymer: An interlaboratory study

  • Laura Ciammaruchi (a1), Ricardo Oliveira (a2), Ana Charas (a2), Tulus (a3), Elizabeth von Hauff (a4), Giuseppina Polino (a5), Francesca Brunetti (a6), Rickard Hansson (a7), Ellen Moons (a7), Miron Krassas (a8), George Kakavelakis (a8), Emmanuel Kymakis (a8), José G. Sánchez (a9), Josep Ferre-Borrull (a9), Lluis F. Marsal (a9), Simon Züfle (a10), Daniel Fluhr (a11), Roland Roesch (a12), Tobias Faber (a12), Ulrich S. Schubert (a12), Harald Hoppe (a12), Klaas Bakker (a13), Sjoerd Veenstra (a13), Gloria Zanotti (a14), Eugene A. Katz (a15), Pälvi Apilo (a16), Beatriz Romero (a17), Tülay Aslı Tumay (a18), Elif Parlak (a18), Luciano Mule Stagno (a19), Vida Turkovic (a20), Horst-Günter Rubahn (a20), Morten Madsen (a20), Vaidotas Kažukauskas (a21), David M. Tanenbaum (a22), Santhosh Shanmugam (a23) and Yulia Galagan (a23)...
  • Please note a correction has been issued for this article.
Abstract

This work is part of the interlaboratory collaboration to study the stability of organic solar cells containing PCDTBT polymer as a donor material. The varieties of the OPV devices with different device architectures, electrode materials, encapsulation, and device dimensions were prepared by seven research laboratories. Sets of identical devices were aged according to four different protocols: shelf lifetime, laboratory weathering under simulated illumination at ambient temperature, laboratory weathering under simulated illumination, and elevated temperature (65 °C) and daylight outdoor weathering under sunlight. The results generated in this study allow us to outline several general conclusions related to PCDTBT-based bulk heterojunction (BHJ) solar cells. The results herein reported can be considered as practical guidance for the realization of stabilization approaches in BHJ solar cells containing PCDTBT.

Copyright
Corresponding author
a)Address all correspondence to this author. e-mail: yulia.galagan@tno.nl
References
Hide All
1.Søndergaard, R., Hösel, M., Angmo, D., Larsen-Olsen, T.T., and Krebs, F.C.: Roll-to-roll fabrication of polymer solar cells. Mater. Today 15, 3649 (2012).
2.Youn, H., Park, H.J., and Guo, L.J.: Organic photovoltaic cells: From performance improvement to manufacturing processes. Small 11, 22282246 (2015).
3.Heeger, A.J.: Semiconducting polymers: The third generation. Chem. Soc. Rev. 39, 23542371 (2010).
5.Zhao, J., Li, Y., Yang, G., Jiang, K., Lin, H., Ade, H., Ma, W., and Yan, H.: Efficient organic solar cells processed from hydrocarbon solvents. Nat. Energy 1, 15027 (2016).
6.Zhao, W., Li, S., Yao, H., Zhang, S., Zhang, Y., Yang, B., and Hou, J.: Molecular optimization enables over 13% efficiency in organic solar cells. J. Am. Chem. Soc. 139, 71487151 (2017).
7.Li, G., Chang, W-H., and Yang, Y.: Low-bandgap conjugated polymers enabling solution-processable tandem solar cells. Nat. Rev. Mater. 2, 17043 (2017).
8.Beaupre, S. and Leclerc, M.: PCDTBT: En route for low cost plastic solar cells. J. Mater. Chem. A 1, 1109711105 (2013).
9.Peters, C.H., Sachs-Quintana, I.T., Kastrop, J.P., Beaupré, S., Leclerc, M., and McGehee, M.D.: High efficiency polymer solar cells with long operating lifetimes. Adv. Energy Mater. 1, 491494 (2011).
10.Wang, D.H., Kim, J.K., Seo, J.H., Park, O.O., and Park, J.H.: Stability comparison: A PCDTBT/PC71BM bulk-heterojunction versus a P3HT/PC71BM bulk-heterojunction. Sol. Energy Mater. Sol. Cells 101(Suppl. C), 249255 (2012).
11.Heumueller, T., Mateker, W.R., Distler, A., Fritze, U.F., Cheacharoen, R., Nguyen, W.H., Biele, M., Salvador, M., von Delius, M., Egelhaaf, H-J., McGehee, M.D., and Brabec, C.J.: Morphological and electrical control of fullerene dimerization determines organic photovoltaic stability. Energy Environ. Sci. 9, 247256 (2016).
12.Gasparini, N., Salvador, M., Strohm, S., Heumueller, T., Levchuk, I., Wadsworth, A., Bannock, J.H., de Mello, J.C., Egelhaaf, H-J., Baran, D., McCulloch, I., and Brabec, C.J.: Burn-in free nonfullerene-based organic solar cells. Adv. Energy Mater. 7, 1700770 (2017).
13.Synooka, O., Eberhardt, K-R., Singh, C.R., Hermann, F., Ecke, G., Ecker, B., von Hauff, E., Gobsch, G., and Hoppe, H.: Influence of thermal annealing on PCDTBT:PCBM composition profiles. Adv. Energy Mater. 4, 1300981 (2014).
14.Wang, T., Pearson, A.J., Dunbar, A.D.F., Staniec, P.A., Watters, D.C., Yi, H., Ryan, A.J., Jones, R.A.L., Iraqi, A., and Lidzey, D.G.: Correlating structure with function in thermally annealed PCDTBT:PC70BM photovoltaic blends. Adv. Funct. Mater. 22, 13991408 (2012).
15.Li, Z., Chiu, K.H., Shahid Ashraf, R., Fearn, S., Dattani, R., Cheng Wong, H., Tan, C-H., Wu, J., Cabral, J.T., and Durrant, J.R.: Toward improved lifetimes of organic solar cells under thermal stress: Substrate-dependent morphological stability of PCDTBT:PCBM films and devices. Sci. Rep. 5, 15149 (2015).
16.Kingsley, J.W., Marchisio, P.P., Yi, H., Iraqi, A., Kinane, C.J., Langridge, S., Thompson, R.L., Cadby, A.J., Pearson, A.J., Lidzey, D.G., Jones, R.A.L., and Parnell, A.J.: Molecular weight dependent vertical composition profiles of PCDTBT:PC(71)BM blends for organic photovoltaics. Sci. Rep. 4, 5286 (2014).
17.Katsouras, A., Gasparini, N., Koulogiannis, C., Spanos, M., Ameri, T., Brabec, C.J., Chochos, C.L., and Avgeropoulos, A.: Systematic analysis of polymer molecular weight influence on the organic photovoltaic performance. Macromol. Rapid Commun. 36, 17781797 (2015).
18.Cheng, P., Yan, C., Wu, Y., Wang, J., Qin, M., An, Q., Cao, J., Huo, L., Zhang, F., Ding, L., Sun, Y., Ma, W., and Zhan, X.: Alloy acceptor: Superior alternative to PCBM toward efficient and stable organic solar cells. Adv. Mater. 28, 80218028 (2016).
19.Mateker, W.R., Sachs-Quintana, I.T., Burkhard, G.F., Cheacharoen, R., and McGehee, M.D.: Minimal long-term intrinsic degradation observed in a polymer solar cell illuminated in an oxygen-free environment. Chem. Mater. 27, 404407 (2015).
20.Alem, S., Chu, T-Y., Tse, S.C., Wakim, S., Lu, J., Movileanu, R., Tao, Y., Bélanger, F., Désilets, D., Beaupré, S., Leclerc, M., Rodman, S., Waller, D., and Gaudiana, R.: Effect of mixed solvents on PCDTBT:PC70BM based solar cells. Org. Electron. 12, 17881793 (2011).
21.Shin, P-K., Kumar, P., Kumar, A., Kannappan, S., and Ochiai, S.: Effects of organic solvents for composite active layer of PCDTBT/PC71BM on characteristics of organic solar cell devices. Int. J. Photoenergy 2014, 8 (2014).
22.Ciammaruchi, L., Brunetti, F., and Visoly-Fisher, I.: Solvent effects on the morphology and stability of PTB7:PCBM based solar cells. Sol. Energy 137(Suppl. C), 490499 (2016).
23.Fang, G., Liu, J., Fu, Y., Meng, B., Zhang, B., Xie, Z., and Wang, L.: Improving the nanoscale morphology and processibility for PCDTBT-based polymer solar cells via solvent mixtures. Org. Electron. 13, 27332740 (2012).
24.Peters, C.H., Sachs-Quintana, I.T., Mateker, W.R., Heumueller, T., Rivnay, J., Noriega, R., Beiley, Z.M., Hoke, E.T., Salleo, A., and McGehee, M.D.: The mechanism of burn-in loss in a high efficiency polymer solar cell. Adv. Mater. 24, 663668 (2012).
25.Kong, J., Song, S., Yoo, M., Lee, G.Y., Kwon, O., Park, J.K., Back, H., Kim, G., Lee, S.H., Suh, H., and Lee, K.: Long-term stable polymer solar cells with significantly reduced burn-in loss. Nat. Commun. 5, 5688 (2014).
26.Roesch, R., Eberhardt, K-R., Engmann, S., Gobsch, G., and Hoppe, H.: Polymer solar cells with enhanced lifetime by improved electrode stability and sealing. Sol. Energy Mater. Sol. Cells 117(Suppl. C), 5966 (2013).
27.Zhang, Y., Bovill, E., Kingsley, J., Buckley, A.R., Yi, H., Iraqi, A., Wang, T., and Lidzey, D.G.: PCDTBT based solar cells: One year of operation under real-world conditions. Sci. Rep. 6, 21632 (2016).
28.Adams, J., Salvador, M., Lucera, L., Langner, S., Spyropoulos, G.D., Fecher, F.W., Voigt, M.M., Dowland, S.A., Osvet, A., Egelhaaf, H-J., and Brabec, C.J.: Water ingress in encapsulated inverted organic solar cells: Correlating infrared imaging and photovoltaic performance. Adv. Energy Mater. 5, 1501065 (2015).
29.Turkovic, V., Engmann, S., Egbe, D.A.M., Himmerlich, M., Krischok, S., Gobsch, G., and Hoppe, H.: Multiple stress degradation analysis of the active layer in organic photovoltaics. Sol. Energy Mater. Sol. Cells 120(Part B), 654668 (2014).
30.Voroshazi, E., Cardinaletti, I., Conard, T., and Rand, B.P.: Light-induced degradation of polymer:fullerene photovoltaic devices: An intrinsic or material-dependent failure mechanism? Adv. Energy Mater. 4, 1400848 (2014).
31.Reese, M.O., Gevorgyan, S.A., Jørgensen, M., Bundgaard, E., Kurtz, S.R., Ginley, D.S., Olson, D.C., Lloyd, M.T., Morvillo, P., Katz, E.A., Elschner, A., Haillant, O., Currier, T.R., Shrotriya, V., Hermenau, M., Riede, M., Kirov, K.R., Trimmel, G., Rath, T., Inganäs, O., Zhang, F., Andersson, M., Tvingstedt, K., Lira-Cantu, M., Laird, D., McGuiness, C., Gowrisanker, S., Pannone, M., Xiao, M., Hauch, J., Steim, R., DeLongchamp, D.M., Rösch, R., Hoppe, H., Espinosa, N., Urbina, A., Yaman-Uzunoglu, G., Bonekamp, J-B., van Breemen, A.J.J.M., Girotto, C., Voroshazi, E., and Krebs, F.C.: Consensus stability testing protocols for organic photovoltaic materials and devices. Sol. Energy Mater. Sol. Cells 95, 12531267 (2011).
32.Kettle, J., Bristow, N., Gethin, D.T., Tehrani, Z., Moudam, O., Li, B., Katz, E.A., dos Reis Benatto, G.A., and Krebs, F.C.: Printable luminescent down shifter for enhancing efficiency and stability of organic photovoltaics. Sol. Energy Mater. Sol. Cells 144(Suppl. C), 481487 (2016).
33.Burlingame, Q., Zanotti, G., Ciammaruchi, L., Katz, E.A., and Forrest, S.R.: Outdoor operation of small-molecule organic photovoltaics. Org. Electron. 41(Suppl. C), 274279 (2017).
34.Gevorgyan, S.A., Espinosa, N., Ciammaruchi, L., Roth, B., Livi, F., Tsopanidis, S., Zufle, S., Queiros, S., Gregori, A., Benatto, G.A.D., Corazza, M., Madsen, M.V., Hosel, M., Beliatis, M.J., Larsen-Olsen, T.T., Pastorelli, F., Castro, A., Mingorance, A., Lenzi, V., Fluhr, D., Roesch, R., Ramos, M.M.D., Savva, A., Hoppe, H., Marques, L.S.A., Burgues, I., Georgiou, E., Serrano-Lujan, L., and Krebs, F.C.: Baselines for lifetime of organic solar cells. Adv. Energy Mater. 6, 1600910 (2016).
35.Gevorgyan, S.A., Madsen, M.V., Roth, B., Corazza, M., Hösel, M., Søndergaard, R.R., Jørgensen, M., and Krebs, F.C.: Lifetime of organic photovoltaics: Status and predictions. Adv. Energy Mater. 6, 1501208 (2016).
36.Son, H.J., Carsten, B., Jung, I.H., and Yu, L.: Overcoming efficiency challenges in organic solar cells: Rational development of conjugated polymers. Energy Environ. Sci. 5, 81588170 (2012).
37.Zen, A., Pflaum, J., Hirschmann, S., Zhuang, W., Jaiser, F., Asawapirom, U., Rabe, J.P., Scherf, U., and Neher, D.: Effect of molecular weight and annealing of poly(3-hexylthiophene)s on the performance of organic field-effect transistors. Adv. Funct. Mater. 14, 757764 (2004).
38.Ma, W., Kim, J.Y., Lee, K., and Heeger, A.J.: Effect of the molecular weight of poly(3-hexylthiophene) on the morphology and performance of polymer bulk heterojunction solar cells. Macromol. Rapid Commun. 28, 17761780 (2007).
39.Koppe, M., Brabec, C.J., Heiml, S., Schausberger, A., Duffy, W., Heeney, M., and McCulloch, I.: Influence of molecular weight distribution on the gelation of P3HT and its impact on the photovoltaic performance. Macromolecules 42, 46614666 (2009).
40.Kline, R.J., McGehee, M.D., Kadnikova, E.N., Liu, J.S., Frechet, J.M.J., and Toney, M.F.: Dependence of regioregular poly(3-hexylthiophene) film morphology and field-effect mobility on molecular weight. Macromolecules 38, 33123319 (2005).
41.Ding, Z., Kettle, J., Horie, M., Chang, S.W., Smith, G.C., Shames, A.I., and Katz, E.A.: Efficient solar cells are more stable: The impact of polymer molecular weight on performance of organic photovoltaics. J. Mater. Chem. A 4, 72747280 (2016).
42.Frolova, L.A., Piven, N.P., Susarova, D.K., Akkuratov, A.V., Babenko, S.D., and Troshin, P.A.: ESR spectroscopy for monitoring the photochemical and thermal degradation of conjugated polymers used as electron donor materials in organic bulk heterojunction solar cells. Chem. Commun. 51, 22422244 (2015).
43.Susarova, D.K., Piven, N.P., Akkuratov, A.V., Frolova, L.A., Polinskaya, M.S., Ponomarenko, S.A., Babenko, S.D., and Troshin, P.A.: ESR spectroscopy as a powerful tool for probing the quality of conjugated polymers designed for photovoltaic applications. Chem. Commun. 51, 22392241 (2015).
44.Shames, A.I., Inasaridze, L.N., Akkuratov, A.V., Goryachev, A.E., Katz, E.A., and Troshin, P.A.: Assessing the outdoor photochemical stability of conjugated polymers by EPR spectroscopy. J. Mater. Chem. A 4, 1316613170 (2016).
45.Glen, T.S., Scarratt, N.W., Yi, H., Iraqi, A., Wang, T., Kingsley, J., Buckley, A.R., Lidzey, D.G., and Donald, A.M.: Dependence on material choice of degradation of organic solar cells following exposure to humid air. J. Polym. Sci., Part B: Polym. Phys. 54, 216224 (2016).
46.Paci, B., Generosi, A., Rossi Albertini, V., Perfetti, P., de Bettignies, R., and Sentein, C.: Time-resolved morphological study of organic thin film solar cells based on calcium/aluminium cathode material. Chem. Phys. Lett. 461, 7781 (2008).
47.Liu, Z.Y., Tian, M.M., and Wang, N.: Influences of Alq3 as electron extraction layer instead of Ca on the photo-stability of organic solar cells. J. Power Sources 250, 105109 (2014).
48.Cros, S., Firon, M., Lenfant, S., Trouslard, P., and Beck, L.: Study of thin calcium electrode degradation by ion beam analysis. Nucl. Instrum. Methods Phys. Res., Sect. B 251, 257260 (2006).
49.Glen, T.S., Scarratt, N.W., Yi, H., Iraqi, A., Wang, T., Kingsley, J., Buckley, A.R., Lidzey, D.G., and Donald, A.M.: Grain size dependence of degradation of aluminium/calcium cathodes in organic solar cells following exposure to humid air. Sol. Energy Mater. Sol. Cells 140(Suppl. C), 2532 (2015).
50.Lloyd, M.T., Olson, D.C., Lu, P., Fang, E., Moore, D.L., White, M.S., Reese, M.O., Ginley, D.S., and Hsu, J.W.P.: Impact of contact evolution on the shelf life of organic solar cells. J. Mater. Chem. 19, 76387642 (2009).
51.Karst, N. and Bernède, J.C.: On the improvement of the open circuit voltage of plastic solar cells by the presence of a thin aluminium oxide layer at the interface organic/aluminium. Phys. Status Solidi A 203, R70R72 (2006).
52.Lloyd, M.T., Peters, C.H., Garcia, A., Kauvar, I.V., Berry, J.J., Reese, M.O., McGehee, M.D., Ginley, D.S., and Olson, D.C.: Influence of the hole-transport layer on the initial behavior and lifetime of inverted organic photovoltaics. Sol. Energy Mater. Sol. Cells 95, 13821388 (2011).
53.Tanenbaum, D.M., Dam, H.F., Roesch, R., Jorgensen, M., Hoppe, H., and Krebs, F.C.: Edge sealing for low cost stability enhancement of roll-to-roll processed flexible polymer solar cell modules. Sol. Energy Mater. Sol. Cells 97, 157163 (2012).
54.Zhang, Y.W., Bovill, E., Kingsley, J., Buckley, A.R., Yi, H.N., Iraqi, A., Wang, T., and Lidzey, D.G.: PCDTBT based solar cells: One year of operation under real-world conditions. Sci. Rep. 6, 21632 (2016).
55.Tournebize, A., Bussiere, P.O., Wong-Wah-Chung, P., Therias, S., Rivaton, A., Gardette, J.L., Beaupre, S., and Leclerc, M.: Impact of UV-visible light on the morphological and photochemical behavior of a low-bandgap poly(2,7-carbazole) derivative for use in high-performance solar cells. Adv. Energy Mater. 3, 478487 (2013).
56.Tournebize, A., Rivaton, A., Gardette, J-L., Lombard, C., Pepin-Donat, B., Beaupre, S., and Leclerc, M.: How photoinduced crosslinking under operating conditions can reduce PCDTBT-based solar cell efficiency and then stabilize it. Adv. Energy Mater. 4, 1 (2014).
57.Inasaridze, L.N., Shames, A.I., Martynov, I.V., Li, B., Mumyatov, A.V., Susarova, D.K., Katz, E.A., and Troshin, P.A.: Light-induced generation of free radicals by fullerene derivatives: An important degradation pathway in organic photovoltaics? J. Mater. Chem. A 5, 80448050 (2017).
58.Li, Z., Chiu, K.H., Ashraf, R.S., Fearn, S., Dattani, R., Wong, H.C., Tan, C.H., Wu, J.Y., Cabral, J.T., and Durrant, J.R.: Toward improved lifetimes of organic solar cells under thermal stress: Substrate-dependent morphological stability of PCDTBT:PCBM films and devices. Sci. Rep. 5, 15149 (2015).
59.Voroshazi, E., Verreet, B., Buri, A., Mueller, R., Di Nuzzo, D., and Heremans, P.: Influence of cathode oxidation via the hole extraction layer in polymer:fullerene solar cells. Org. Electron. 12, 736744 (2011).
60.Nair, S., Kathiresan, M., Mukundan, T., and Natarajan, V.: Passivation of organic field effect transistor with photopatterned Parylene to improve environmental stability. Microelectron. Eng. 163, 3642 (2016).
61.Giannouli, M., Drakonakis, V.M., Savva, A., Eleftheriou, P., Florides, G., and Choulis, S.A.: Methods for improving the lifetime performance of organic photovoltaics with low-costing encapsulation. ChemPhysChem 16, 11341154 (2015).
62.Won Lim, J., Kyu Jin, C., Yong Lim, K., Jae Lee, Y., Kim, S-R., Choi, B-I., Whan Kim, T., Ha Kim, D., Kyung Hwang, D., and Kook Choi, W.: Transparent high-performance SiOxNy/SiOx barrier films for organic photovoltaic cells with high durability. Nano Energy 33(Suppl. C), 1220 (2017).
63.Dollinger, F., Nehm, F., Müller-Meskamp, L., and Leo, K.: Laminated aluminum thin-films as low-cost opaque moisture ultra-barriers for flexible organic electronic devices. Org. Electron. 46(Suppl. C), 242246 (2017).
64.Morlier, A., Cros, S., Garandet, J-P., and Alberola, N.: Gas barrier properties of solution processed composite multilayer structures for organic solar cells encapsulation. Sol. Energy Mater. Sol. Cells 115(Suppl. C), 9399 (2013).
65.Nam, T., Park, Y.J., Lee, H., Oh, I-K., Ahn, J-H., Cho, S.M., Kim, H., and Lee, H-B-R.: A composite layer of atomic-layer-deposited Al2O3 and graphene for flexible moisture barrier. Carbon 116(Suppl. C), 553561 (2017).
66.Cheng, P. and Zhan, X.W.: Stability of organic solar cells: Challenges and strategies. Chem. Soc. Rev. 45, 25442582 (2016).
67.Salvador, M., Gasparini, N., Perea, J.D., Paleti, S.H., Distler, A., Inasaridze, L.N., Troshin, P.A., Luer, L., Egelhaaf, H-J., and Brabec, C.: Suppressing photooxidation of conjugated polymers and their blends with fullerenes through nickel chelates. Energy Environ. Sci. 10, 20052016 (2017).
68.Turkovic, V., Engmann, S., Tsierkezos, N., Hoppe, H., Madsen, M., Rubahn, H-G., Ritter, U., and Gobsch, G.: Long-term stabilization of organic solar cells using hydroperoxide decomposers as additives. Appl. Phys. A 122, 16 (2016).
69.Turkovic, V., Engmann, S., Tsierkezos, N., Hoppe, H., Ritter, U., and Gobsch, G.: Long-term stabilization of organic solar cells using hindered phenols as additives. ACS Appl. Mater. Interfaces 6, 1852518537 (2014).
70.Turkovic, V., Engmann, S., Tsierkezos, N.G., Hoppe, H., Madsen, M., Rubahn, H.G., Ritter, U., and Gobsch, G.: Long-term stabilization of organic solar cells using UV absorbers. J. Phys. D: Appl. Phys. 49, 125604 (2016).
Recommend this journal

Email your librarian or administrator to recommend adding this journal to your organisation's collection.

Journal of Materials Research
  • ISSN: 0884-2914
  • EISSN: 2044-5326
  • URL: /core/journals/journal-of-materials-research
Please enter your name
Please enter a valid email address
Who would you like to send this to? *
×

Keywords

Type Description Title
WORD
Supplementary materials

Ciammaruchi et al. supplementary material
Figures S1-S2 and Tables S1-S5

 Word (8.2 MB)
8.2 MB

Metrics

Altmetric attention score

Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed