Hostname: page-component-848d4c4894-p2v8j Total loading time: 0.001 Render date: 2024-05-17T17:14:31.103Z Has data issue: false hasContentIssue false
  • English
  • Français

Study on preparing PLT(28) thin film and its electro-optic effect

Published online by Cambridge University Press:  31 January 2011

Ai-Li Ding ,
Wei-Gen Luo ,
P. S. Qiu ,
J. W. Feng  and
R. T. Zhang
Ai-Li Ding
Affiliation:
Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China
Wei-Gen Luo
Affiliation:
Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China
P. S. Qiu
Affiliation:
Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China
J. W. Feng
Affiliation:
Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China
R. T. Zhang
Affiliation:
Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China
Get access

Abstract

PLT(28) thin films deposited on glass substrates were studied by two sputtering processes. One is an in situ magnetron sputtering and the other is a low-temperature magnetron sputtering. The sintered PLT ceramic powders are used as a sputtering target for both processes. The influences of sputtering and annealing conditions on structure and crystallinity of the films were investigated. The electro-optic (E-O) properties of PLT(28) thin films prepared by the two processes were determined by a technique according to Faraday effect. The researches showed the E-O properties were strongly affected by the sputtering process. The film with larger grains exhibits stronger E-O effect. The quadratic E-O coefficient of PLT(28) thin film varies in the range of 0.1 × 10−16 to 1.0 × 10−16 (m/v)2.

Type
Articles
Information
Journal of Materials Research , Volume 13 , Issue 5 , May 1998 , pp. 1266 - 1270
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Lee, S. H.et al., Opt. Eng. 25, 250 (1986).Google Scholar
2.Wang, F.et al., Int. SAMPE Electronic Conf. Series 4, 712 (1990).Google Scholar
3.Adachi, H.et al., J. Appl. Phys. 60, 736 (1986).CrossRefGoogle Scholar
4.Huang, Y. H., Luo, W. G.et al., Proc. SPIE-Int. Soc. Opt. Eng. 1126, 36 (1989).Google Scholar
5.Zhang, R. T., Ge, M., and Luo, W. G., Proc. SPIE 1519, 757 (1991).CrossRefGoogle Scholar
6.Luo, W. G., Ding, A. L., Zhang, R. T., and Chen, K. S., Proc. ISAF, 19 (1992).Google Scholar
7.Luo, W. G., Ding, A. L., Zhang, R. T., Chan, K. S., and Siu, G. G., Proc. ISAF, 233 (1992).Google Scholar