Skip to main content Accessibility help
×
×
Home

Viscous Poisson's coefficient determined by discontinuous hot forging

  • Ruzhong Zuo (a1), Emil Aulbach (a1) and Jürgen Rödel (a1)
Abstract

A high-resolution laser-assisted loading dilatometer was applied for the precise measurement of radial and axial strain rates under different uniaxial loads, using alumina as a model material. As a continuous application of an external load can lead to an anisotropic microstructure, a discontinuous hot forging technique was utilized to determine the viscous Poisson's coefficient. In these studies, samples were presintered to different densities and only then were hot-forging tests performed. The result provides an isotropic viscous Poisson's coefficient, which increases smoothly between 0.21 and 0.42 within the accessible density range. Combined with the uniaxial viscosity measured before using the same technique, the hydrostatic sintering stress, bulk viscosity, and shear viscosity as a function of density are now available for solid-state sintering. A comparison of the experimentally obtained results with several theoretical models is included.

Copyright
Corresponding author
a) Address all correspondence to this author. e-mail: zuo@ceramics.tu-darmstadt-de
References
Hide All
1.Christensen, R.M., Theory of Viscoelasticity, An Introduction, 2nd ed. (Academic Press, New York, 1982).
2.Scherer, G.W. and Rekhson, S.M., J. Am. Ceram. Soc. 65, 352 (1982).
3.Riedel, H., Meyer, D., Svoboda, J., and Zipse, H., Int. J. Ref. Met. Hard Mater. 12, 55 (19931994).
4.Lu, G., Sutterlin, R.C., and Gupta, T.K., J. Am. Ceram. Soc. 76, 1907 (1993).
5.Kanters, J., Eisele, U., and Rödel, J., J. Am. Ceram. Soc. 84, 2757 (2001).
6.Bordia, R.K. and Raj, R., J. Am. Ceram. Soc. 68, 287 (1985).
7.Scherer, G.W. and Garino, T., J. Am. Ceram. Soc. 68(4), 216 (1985).
8.Stech, M., Reynders, P.R., and Rödel, J., J. Am. Ceram. Soc. 83, 1889 (2000).
9.de, L.C. Jonghe and Rahaman, M.N., J. Am. Ceram. Soc. 67, C214 (1984).
10.Skorohod, V., Olevsky, E., and Shtern, M., J. Sci. Sintering. 23, 79 (1991).
11.McMeeking, R.M. and Kuhn, L.T., Acta Metall. 40, 961 (1992).
12.Svoboda, J., Riedel, H., and Zipse, H., Acta Metall. 42, 435 (1994).
13.Riedel, H., Svoboda, J., and Zipse, H., Acta Metall. 42, 445 (1994).
14.Parhami, F. and McMeeking, R.M., Mech. Mater. 27, 111 (1998).
15.Olevsky, E.A., Mater. Sci. Eng. R 23(2), 41 (1998).
16.Scherer, G.W., J. Non-Cryst. Solids 34, 239 (1979).
17.Raj, R. and Bordia, R.K., Acta Metall. 32, 1003 (1984).
18.Venkatachari, K.R. and Raj, R., J. Am. Ceram. Soc. 69, 499 (1986).
19.Rahaman, M.N., Jonghe, L.C. de, and Brook, R.J.. J. Am. Ceram. Soc. 69, 53 (1986).
20.Hsueh, C.H., Evans, A.G., and Cannon, R.M., Acta Metall. 34, 927 (1986).
21.Gregg, R.A. and Rhines, F.N., Metall. Trans. 4(5), 1365 (1973)
22.de, L.C. Jonghe and Rahaman, M.N., Rev. Sci. Instrum. 55, 2007 (1984).
23.Scherer, G.W., J. Am. Ceram. Soc. 69, C206 (1986).
24.Geguzin, Y., Matsokin, V., Pluzhnikova, D., and Dayad, H., Sov. Powd. Met. 2, 39 (1986).
25.Panda, P.C., Wang, J., and Raj, R., J. Am. Ceram. Soc. 71(12), C-507 (1988).
26.Cai, P.Z., Messing, G.L., and Green, D.L., J. Am. Ceram. Soc. 82(2), 445 (1997).
27.Salamone, S.M., Stearns, L.C., Bordia, R.K., and Harmer, M.P., J. Am. Ceram. Soc. 86, 883 (2003).
28.Bordia, R.K. and Scherer, G.W., Acta Metall. 36, 2393 (1988).
29.Bordia, R.K. and Scherer, G.W., Acta Metall. 36, 2399 (1988).
30.Rahaman, M.N., de, L.C. Jonghe, and Hsueh, C.H., J. Am. Ceram. Soc. 69(1), 58 (1986)
31.Raj, R., J. Am. Ceram. Soc. 65(3), C-46 (1982).
32.Zuo, R., Aulbach, E., Bordia, R.K., and Rödel, J., J. Am. Ceram. Soc. 86, 1099 (2003).
33.Rahaman, M.N. and Jonghe, L.C. de, J. Am. Ceram. Soc. 67(10), C205 (1984)
34.Zuo, R., Aulbach, E., and Rödel, J., Acta Mater. 51, 4561 (2003).
35.Aulbach, E., Zuo, R., and Rödel, J., Exp. Mech. (in press, 2003).
36.Mikeska, K.R., Scherer, G.W., and Bordia, R.K., Ceram. Trans. 7, 200 (1990).
Recommend this journal

Email your librarian or administrator to recommend adding this journal to your organisation's collection.

Journal of Materials Research
  • ISSN: 0884-2914
  • EISSN: 2044-5326
  • URL: /core/journals/journal-of-materials-research
Please enter your name
Please enter a valid email address
Who would you like to send this to? *
×

Metrics

Full text views

Total number of HTML views: 0
Total number of PDF views: 0 *
Loading metrics...

Abstract views

Total abstract views: 0 *
Loading metrics...

* Views captured on Cambridge Core between <date>. This data will be updated every 24 hours.

Usage data cannot currently be displayed