No CrossRef data available.
Article contents
Derivation of Non-Newtonian Magnetic Fluid Lubricated Rough Centrosymmetric Squeeze Film Reynolds Equation and its Application
Published online by Cambridge University Press: 24 August 2017
Abstract
Based upon the Shliomis ferromagnetic fluid model and the Stokes microcontinuum theory incorporating with the Christensen stochastic model, a modified Reynolds equation of centrosymmetric squeeze films has been derived in this paper. The Reynolds equation includes the combined effects of non-Newtonian rheology, magnetic fluids with applied magnetic fields, rotational inertia forces, and surface roughness. To guide the use of the derived equation, the squeeze film of rotational rough-surface circular disks lubricated with non-Newtonian magnetic fluids is illustrated. According to the results obtained, the effects of rotation inertia decrease the load capacity and the squeeze film time of smooth circular disks. By the use of non-Newtonian magnetic fluids with applied magnetic fields, the rotational circular disks predict better squeeze film performances. When the influences of circumferential roughness patterns are considered, the non-Newtonian magnetic-fluid lubricated rotational rough disks with applied magnetic fields provide further higher values of the load capacity and the squeeze film time as compared to those of the smooth case.
- Type
- Research Article
- Information
- Copyright
- Copyright © The Society of Theoretical and Applied Mechanics 2019
References
1. Shliomis, M. I., “Effective Viscosity of Magnetic Suspensions,” Soviet Physics - JETP, 34, pp. 1291–1294 (1972).Google Scholar
2. Shliomis, M. I., “Magnetic Fluids,” Soviet Physics Uspekhi, 17, pp. 153–169 (1974).Google Scholar
3. Rosensweig, R. E., Ferrohydrodynamics, Cambridge University Press, New York (1985).Google Scholar
4. Gitter, K. and Odenbach, S., “Experimental Investigations on a Branched Tube Model in Magnetic Drug Ttargeting,” Journal of Magnetism and Magnetic Materials, 323, pp. 1413–1416 (2011).Google Scholar
5. Shafii, M. B., Daneshvar, F., Jahani, N. and Mobini, K., “Effect of Ferrofluid on the Performance and Emission Patterns of a Four-Stroke Engine,” Advances in Mechanical Engineering, 2011, pp. 1–15 (2011).Google Scholar
6. Zhang, B. and Nakajima, A., “Dynamics of the Magnetic Fluid Support Grinding of Si3N4 Ceramic Balls for Ultraprecision Bearings and Importance in Spherical Surface Generation,” Precision Engineering, 27, pp. 1–8 (2003).Google Scholar
7. Tu, Y. O., “Mathematical Modeling and Computer Simulation for Spin Coating of Ferrofluid,” IEEE Transations on Magnetics, 24, pp. 3129–3131 (1988).Google Scholar
8. Chandra, P., Sinha, P. and Kumar, D., “Ferrofluids Lubrication of a Journal Bearing Considering Cavitation,” Tribology Transactions, 35, pp. 163–169 (1992).Google Scholar
9. Lin, J. R., “Dynamic Characteristics of Magnetic Fluid Based Sliding Bearings,” Mechanika, 19, pp. 554–558 (2013).Google Scholar
10. Lin, J. R., Hung, T. C. and Hu, S. T., “Effects of Fluid Inertia Forces in Ferrofluid Lubricated Circular Stepped Squeeze Films – Shliomis Model,” Industrial Lubrication and Tribology, 68, pp. 712–717 (2016).Google Scholar
11. Oliver, D. R., “Load Enhancement Effects Due to Polymer Thickening in a Short Model Journal Bearing,” Journal of Non-Newtonian Fluid Mechanics, 30, pp. 185–189 (1988).Google Scholar
12. Stokes, V. K., “Couple Stresses in Fluids,” Physics of Fluids, 9, pp. 1709–1715 (1966).Google Scholar
13. Walicki, E. and Walicka, A., “Inertia Effecting the Squeeze Film of a Couple-Stress Fluid in Biological Bearings,” International Journal of Applied Mechanics and Engineering, 4, pp. 363–373 (1999).Google Scholar
14. Srivastava, V. P., “Particle-Fluid Suspension Model of Blood Flow through Stenotic Vessels with Applications,” International Journal of Bio-Medical Computing, 38, pp. 141–154 (1995).Google Scholar
15. Mekheimer, K. S., “Peristaltic Transport of a Couple Stress Fluid in a Uniform and Non-Uniform Channels,” Biorheology, 39, pp. 755–765 (2002).Google Scholar
16. Lin, J. R., Lu, R. F., Lin, M. C. and Wang, P. Y., “Squeeze Film Characteristics of Parallel Circular Disks Lubricated by Ferrofluids with Non-Newtonian Couple Stresses,” Tribology International, 61, pp. 56–61 (2013).Google Scholar
17. Christensen, H., “Stochastic Model for Hydrodynamic Lubrication of Rough Surfaces,” Proceedings of the Institution of Mechanical Engineers, 184, pp. 1013–1025 (1969-1970).Google Scholar
18. Andharia, P. I., Gupta, J. L. and Deheri, G. M., “Effect of Transverse Roughness on the Behavior of Squeeze Film in a Spherical Bearing,” International Journal of Applied Mechanics and Engineering, 4, pp. 19–24 (1999).Google Scholar
19. Prakash, J. and Tiwari, K., “Roughness Effects in Porous Circular Squeeze-Plates with Arbitrary Wall Thickness,” Journal of Lubrication Technology, 105, pp. 90–95 (1983).Google Scholar
20. Hsu, C. H., Lai, C., Lu, R. F. and Lin, J. R., “Combined Effects of Surface Roughness and Rotating Inertia on the Squeeze Film Characteristics of Parallel Circular Disks,” Journal of Marine Science and Technology, 17, pp. 60–66 (2009).Google Scholar
21. Lin, J. R., Liang, L. J., Lin, M. C. and Hu, S. T., “Effects of Circumferential and Radial Rough Surfaces in a Non-Newtonian Magnetic Fluid Lubricated Squeeze Film,” Applied Mathematical Modelling, 39, pp. 6743–6750 (2015).Google Scholar
22. Batchelor, G. K., “The Effect of Brownian Motion on the Bulk Stress in a Suspension of Spherical Particles,” Journal of Fluid Mechanics, 83, pp. 97–117 (1977).Google Scholar