Hostname: page-component-848d4c4894-ndmmz Total loading time: 0 Render date: 2024-05-15T03:43:25.952Z Has data issue: false hasContentIssue false

Numerical Study for Centrifugal Model Tests of a Single Pile Foundation Installed in Sandy Deposits

Published online by Cambridge University Press:  05 May 2011

C. W. Lu*
Affiliation:
Department of Construction Engineering, National Kaohsiung First University of Science and Technology, Kaohsiung, Taiwan 91164, R.O.C.
*
*Assistant Professor
Get access

Abstract

It is believed that a dynamic analysis is urgently required to provide a more reliable numerical method for seismic evaluation of a full system, which includes foundation, super structure, and ground in earthquake zones such as Taiwan and Japan. A centrifugal model test of pile foundation is simulated numerically using a three-dimensional finite-element model (3D-FEM) code in this study. In the numerical simulation, parameters of the sandy soils in tij model that are derived from accumulated experiences in static tests are first calibrated by centrifugal vibration tests of sandy ground. Model tests of a single pile foundation installed in grounds of same unit weight of soil as in the static tests are then simulated using the calibrated parameters. The numerical simulation resulted in a good agreement with the corresponding physical model tests. By comparing the computed and the observed results, one can find and confirm that it is necessary to employ an appropriate soil model to reproduce dynamic soil behavior due to major vibration. Representation of pile by beam element in the numerical analysis is applicable when attention is paid on the response acceleration of top of pile foundation, on soils at some distances to the pile foundation, and on bending moment of the pile in a stiffer ground. Equal-displacement boundary condition for two-side boundaries is proven to be efficient. To reduce the computation time, the assumption of a constant damping of viscous matrix is acceptable.

Type
Articles
Copyright
Copyright © The Society of Theoretical and Applied Mechanics, R.O.C. 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.EI-Masrafawi, H., Kaynia, A. M. and Novak, M., “The Superposition Approach to Pile Group Dynamics,” Geot. Special Publication, ASCE, 34, pp. 114135(1992).Google Scholar
2.Anandarajah, A., Rashidi, H. and Arulanandan, K., “Elasto-Plastic Finite Element Analysis of a Soil-Structure System Under Earthquake Excitation,” Computers and Geotechnics, 17, pp. 301325 (1995).CrossRefGoogle Scholar
3.Fukutake, K., Ohtsuki, A. and Yoshimi, Y., “A New Soil Cement Block System for Protecting Piled in Liquefiable Ground,” Proc. of 1st Int. Conf. on Earthquake Geotechnical Engineering, Tokyo, Japan, pp. 605610 (1995).Google Scholar
4.Finn, W. D. L, Thavaraj, T. and Wu, G., “Nonlinear Seismic Response of Pile Foundations during Strong Earthquake Shaking,” Proc. of Int. Symp. Seismic Behavior of Ground and Geotechnical Structure, Rotterdam, The Netherlands, pp. 195204 (1997).Google Scholar
5.Wakai, A., Ugai, K. and Matsuda, T., “Seismic Analysis of a Bridge-Ground System Excited in the Axial Direction of the Bridge,” Proc. of 6th Int. Symp. Numerical Models in Geomechanics, Montreal, Canada, pp. 709712 (1997).Google Scholar
6.Imamura, S., Hagiwara, T., Tsukamoto, Y. and Ishihara, K., “Response of Pile Groups gainst Seismically Induced Lateral Flow in Centrifuge Model Tests,” Soils and Foundations, Japanese Society of Soil Mechanics and Foundation Engineering, 44 (3), pp. 3955 (2004).Google Scholar
7.Lin, S. S., Liao, J. C., Chen, J. T. and Chen, L., “Lateral Performance of Piles Evaluated via Inclinometer Data,” Computer and Geotechnics, 32, pp. 411421 (2005).CrossRefGoogle Scholar
8.Tokimatsu, K., Suzuki, H. and Sato, M., “Effects of Inertial and Kinematic Interaction on Seismic Behavior of Pile with Embedded Foundation,” Soil Dynamics and Earthquake Engineering, 25, pp. 753762 (2005).CrossRefGoogle Scholar
9.Finn, W. D. L., Thavaraj, T., Wilson, D. W., Boulanger, R. W. and Kutter, B. L., “Seismic Response Analysis of Pile Foundations at Liquefiable Sites,” Proc. 7th US-Japan Workshop on Earthquake Resistant Design of Lifeline Facilities and Countermeasures Against Liquefaction, Technical Report, Seattle, USA, pp. 579586 (1999).Google Scholar
10.Kimura, M. and Zhang, F., “Seismic Evaluations of Pile-Foundations with Three Different Methods Based on Three-Dimensional Elasto-Plastic Finite Element Analysis,” Soils and Foundations, Japanese Society of Soil Mechanics and Foundation Engineering, 40, pp. 113132 (2000).Google Scholar
11.Zhang, F., Kimura, M., Nakai, T. and Hoshikawa, T., “Mechanical Behavior of Pile Foundations Subjected to Cyclic Lateral Loading Up to the Ultimate State,” Soils and Foundations, Japanese Society of Soil Mechanics and Foundation Engineering, 40, pp. 117 (2000).Google Scholar
12.Ye, G. L., Miyaguchi, H., Huang, Yu, Sawada, H., Zhang, F. and Yashima, A., “Dynamic behavior of group-pile foundation evaluated by simplified model and sophisticated model,” Proc. 13th WCEE, Vancouver, Canada, Paper 28, CD-ROM, (2004).Google Scholar
13.Nakai, T., “An Isotropic Hardening Elastoplastic Model for Sand Considering the Stress Path Dependency in Three-Dimensional Stresses,” Soils and Foundations, Japanese Society of Soil Me-chanics and Foundation Engineering, 29, pp. 119137(1989).Google Scholar
14.Chowdhury, E Q., “Elastoplastic Models for Clays Under Monotonic and Cyclic Loading Using Conventional and Modified Stresses,” Doctoral Dissertation, Nagoya Institute of Technology, Japan (1998).Google Scholar
15.Nakai, T. and Hinokio, M., “A Simple Elastoplasic Model for Geomaterials Based on TIJ-Concept and Its Calibration by Various Test Data,” Proc. of Sessions of the Geo-Frontiers 2005 Congress, Texas, USA, pp. 455465 (2005)Google Scholar
16.Farias, M. M., Nakai, T., Shahin, H. M., Pedroso, D. H., Passos, P. G. O. and Hinokio, M., “Ground Densification Due to Sand Compaction Piles,” Soils and Foundations, Japanese Society of Soil Mechanics and Foundation Engineering, 45, pp. 214230 (2005)Google Scholar
17.Schofield, A. N., “Centrifuge Test,” Soil Dynamics and Earthquake Engineering, 2, pp. 183187 (1983).CrossRefGoogle Scholar
18.Scott, R. F., “Centrifuge Model Testing at Caltech,” Soil Dynamics and Earthquake Engineering, 2, pp. 185198(1983).Google Scholar
19.Prevost, J. H. and Scanlan, R. H., “Dynamic Soil- Structure Interaction: Centrifuge Modeling,” Soil Dynamics and Earthquake Engineering, 2, pp. 212221 (1983).CrossRefGoogle Scholar
20.Oogawa, S., Kameii, H., Zhang, F. and Kimura, M., “A Study on Seismic behavior of Jacket-type Foundation Using Centrifuge Test (I),” Proc. of 26th Earthquake Engineering Symposium, Japanese Society of Soil Mechanics and Foundation Engineering, pp. 5661 (2001) (in Japanese).Google Scholar