Skip to main content Accessibility help
×
Preparing your materials

Competing Interests

All authors must include a competing interest declaration in their title page. This declaration will be subject to editorial review and may be published in the article.

Competing interests are situations that could be perceived to exert an undue influence on the content or publication of an author’s work. They may include, but are not limited to, financial, professional, contractual or personal relationships or situations.

If the manuscript has multiple authors, the author submitting must include competing interest declarations relevant to all contributing authors. 

Example wording for a declaration is as follows: “Competing interests: Author 1 is employed at organisation A, Author 2 is on the Board of company B and is a member of organisation C. Author 3 has received grants from company D.” If no competing interests exist, the declaration should state “Competing interests: The author(s) declare none”. 

Publishing Ethics

The Journal of Tropical Ecology and Cambridge University Press take issues of copyright infringement, plagiarism, or other breaches of best practice in publication very seriously. We seek to uphold high standards of research integrity, and expect the same of our authors. Accordingly, we will always investigate claims of plagiarism or other research integrity or publication ethics allegations. Submitted articles may be checked using duplication-checking software. Where an article is found to have plagiarised other work or included third-party copyright material without permission or with insufficient acknowledgement, or where authorship of the article is contested, we reserve the right to take action. Any action would be in accordance with Cambridge University Press’s Research Publishing Ethics Guidelines and may include, without limitation, retracting the article, referring the matter to the author’s institution and/or other relevant academic bodies or societies, or appropriate legal action”.

For further information on Cambridge's Ethical Guidelines, please visit the page: Ethical Standards.

JTE considers all manuscripts on the strict condition that:

  1. The manuscript is your own original work, and does not duplicate any other previously published work;
  2. The manuscript has been submitted only to the journal - it is not under consideration or peer review or accepted for publication or in press or published elsewhere;
  3. All listed authors know of and agree to the manuscript being submitted to the journal; and
  4. The manuscript contains nothing that is abusive, defamatory, fraudulent, illegal, libellous, or obscene.

The Journal adheres to the Committee on Publication Ethics (COPE) guidelines on research and publications ethics.

Ethical statement

Authors should ensure that any studies involving human or animal subjects conform to national, local and institutional laws and requirements (e.g. WMA Declaration of Helsinki, NIH Policy on Use of laboratory Animals, EU Directive on Use of Animals) and confirm that approval has been sought and obtained where appropriate. Authors should obtain express permission from human subjects and respect their privacy.

Where research involves human and/or animal experimentation, the following statements should be included (as applicable): "The authors assert that all procedures contributing to this work comply with applicable ethical standards of the relevant national and institutional committees on human experimentation and with the Helsinki Declaration of 1975, as revised in 2008" and/or "The authors assert that all procedures contributing to this work comply with applicable national and institutional ethical guidelines on the care and use of laboratory or otherwise regulated animals". If not applicable, please include the following statement: "None".

References

References to literature in the text should conform to the Cambridge A referencing style. For example, direct citation as: Benzing (2000) or Moses & Semple (2011); or parenthetically (Holste et al.1981). If a number of references are cited at one place in the text, they should not be be arranged chronologically, but alphabetically by first author, with single-author references before those with two authors, which in turn come before those with three or more authors, e.g. (Chan 2008, Dubois & Blanc 1999, Silva & Almeida 2011, Silva et al. 2009, Williams 2003). Use the following as contractions in text: 'pers. obs.', 'pers. comm.', 'unpubl. data', 'in press'. 

References with two or more authors should be arranged first alphabetically then chronologically. For journal articles, the full journal name, volume and page numbers where possible must be given. For books, Editor names, publisher and publisher’s location must be given including chapters and page numbers if certain sections are used. When citing conference material, the date and location must be provided as well as any page numbers, publisher and volume numbers. Year of publication must be provided for all references. Foreign language citations

citations where the English alphabet is not used should be translated into English.

Examples:

Damschen EI, Baker DV, Bohrer G, Nathan R, Orrock JL, Turner JR, Brudvig LA, Haddad NM, Levey DJ and Tewksbury JJ (2014) How fragmentation and corridors affect wind dynamics and seed dispersal in open habitats. Proceedings of the National Academy of Sciences 111, 3484–3489.

Danin A and Orshan G (1995) Circular arrangement of Stipagrostis ciliata clumps in the Negev, Israel and near Gokaeb, Namibia. Journal of Arid Environments 30, 307–313.

Hutchings MJ (1996) The structure of plant populations. In Crawley MJ (ed), Plant Ecology. Oxford: Blackwell Publishing, pp. 325–358.

Sheffer E, Yizhaq H, Gilad E, Shachak M and Meron E (2007) Why do plants in resource-deprived environments form rings? Ecological Complexity 4, 192–200.

Stephens SG and Rick CM (1966) Problems on the origin, dispersal, and establishment of the Galápagos cottons. In Bowman RI (ed.), The Galapagos: Proceedings of the Symposia of the Galápagos International Scientific Project. Los Angeles: University of California Press, pp. 201–208.

Tables and Figures

Figure and table legends should be concise but informative, ideally allowing readers to comprehend what the figure/table represents without reference to the main text of the paper. Each table should be provided on a separate page after the References section. The figures should be supplied as separate files in TIF, PDF, or EPS format at approximate final publication size (please see a recent article in the journal for column widths). Artwork should be at the following minimum resolutions: line artwork (black & white), 1200 dpi; combination, i.e. line/tone (greyscale), 800 dpi; black-and-white halftone (greyscale), 300 dpi; and colour halftone, 300 dpi. Colour is only encouraged where its use increases comprehension of the figure. All wording within submitted figures must be Arial 8 pt font. Figure captions should be supplied at the end of the article, not as part of the figure files. Where possible put keys to symbols and lines in legends, not on figures. Please refer to the Cambridge Journals Artwork Guide for details.

Graphical abstract and social media summary

Authors are encouraged to submit a graphical abstract as a single schematic image, without a separate legend, representing the key message of the article. The image should be in TIF or JPG format, 1200 pixels square, font Arial 12 pt size or larger. A simple summary of the main findings of the article may be provided by the author(s), to be used by JTE to promote the article through social media channels.

Supplementary Material

Additional data (e.g. data sets, large tables) relevant to the paper can be submitted as Supplementary Material, and must be cited in a relevant place in the text of the paper. The paper should stand alone without these data. Each supplementary file must be supplied as separate files and should be clearly titled (e.g., S. Jones_supplementary_figure_1). For each file, please provide a text summary of no more than 50 words. Please note audiovisual files must not exceed 50MB.

Although Supplementary Material is peer reviewed, it is not checked, copyedited or typeset after acceptance and it is loaded onto the journal's website exactly as supplied. You should check your Supplementary Material carefully to ensure that it adheres to journal styles. Corrections cannot be made to the Supplementary Material after acceptance of the manuscript. Please bear this in mind when deciding what content to include as Supplementary Material.

English language editing services 

Authors, particularly those whose first language is not English, may wish to have their English-language manuscripts checked by a native speaker before submission. This step is optional, but may help to ensure that the academic content of the paper is fully understood by the Editor and any reviewers.  

In order to help prospective authors to prepare for submission and to reach their publication goals, Cambridge University Press offers a range of high-quality manuscript preparation services – including language editing – delivered in partnership with American Journal Experts. You can find out more on our Language Services page.

Please note that the use of any of these services is voluntary, and at the author's own expense. Use of these services does not guarantee that the manuscript will be accepted for publication, nor does it restrict the author to submitting to a Cambridge-published journal. 

Supplementary materials

Material that is not essential to understanding or supporting a manuscript, but which may nonetheless be relevant or interesting to readers, may be submitted as supplementary material. Supplementary material will be published online alongside your article, but will not be published in the pages of the journal. Types of supplementary material may include, but are not limited to, appendices, additional tables or figures, datasets, videos, and sound files.

Supplementary materials will not be typeset or copyedited, so should be supplied exactly as they are to appear online. Please see our general guidance on supplementary materials for further information.

Where relevant we encourage authors to publish additional qualitative or quantitative research outputs in an appropriate repository, and cite these in manuscripts.

Authorship and contributorship

All authors listed on any papers submitted to this journal must be in agreement that the authors listed would all be considered authors according to disciplinary norms, and that no authors who would reasonably be considered an author have been excluded. For further details on this journal’s authorship policy, please see this journal's publishing ethics policies.

Author affiliations

Author affiliations should represent the institution(s) at which the research presented was conducted and/or supported and/or approved. For non-research content, any affiliations should represent the institution(s) with which each author is currently affiliated. 

For more information, please see our author affiliation policy and author affiliation FAQs.

Author Hub

You can find guides for many aspects of publishing with Cambridge at Author Hub, our suite of resources for Cambridge authors.

Use of artificial intelligence (AI) tools

We acknowledge the increasing use of artificial intelligence (AI) tools in the research and writing processes. To ensure transparency, we expect any such use to be declared and described fully to readers, and to comply with our plagiarism policy and best practices regarding citation and acknowledgements. We do not consider artificial intelligence (AI) tools to meet the accountability requirements of authorship, and therefore generative AI tools such as ChatGPT and similar should not be listed as an author on any submitted content. 

In particular, any use of an AI tool: 

  • to generate images within the manuscript should be accompanied by a full description of the process used, and declared clearly in the image caption(s) 
  • to generate text within the manuscript should be accompanied by a full description of the process used, include appropriate and valid references and citations, and be declared in the manuscript’s Acknowledgements. 
  • to analyse or extract insights from data or other materials, for example through the use of text and data mining, should be accompanied by a full description of the process used, including details and appropriate citation of any dataset(s) or other material analysed in all relevant and appropriate areas of the manuscript 
  • must not present ideas, words, data, or other material produced by third parties without appropriate acknowledgement or permission 

Descriptions of AI processes used should include at minimum the version of the tool/algorithm used, where it can be accessed, any proprietary information relevant to the use of the tool/algorithm, any modifications of the tool made by the researchers (such as the addition of data to a tool’s public corpus), and the date(s) it was used for the purpose(s) described. Any relevant competing interests or potential bias arising as a consequence of the tool/algorithm’s use should be transparently declared and may be discussed in the article. 

ORCID

We require all corresponding authors to identify themselves using ORCID when submitting a manuscript to this journal. ORCID provides a unique identifier for researchers and, through integration with key research workflows such as manuscript submission and grant applications, provides the following benefits:

  • Discoverability: ORCID increases the discoverability of your publications, by enabling smarter publisher systems and by helping readers to reliably find work that you have authored.
  • Convenience: As more organisations use ORCID, providing your iD or using it to register for services will automatically link activities to your ORCID record, and will enable you to share this information with other systems and platforms you use, saving you re-keying information multiple times.
  • Keeping track: Your ORCID record is a neat place to store and (if you choose) share validated information about your research activities and affiliations.

See our ORCID FAQs for more information.

If you don’t already have an iD, you will need to create one if you decide to submit a manuscript to this journal. You can register for one directly from your user account on ScholarOne, or alternatively via https://ORCID.org/register.

If you already have an iD, please use this when submitting your manuscript, either by linking it to your ScholarOne account, or by supplying it during submission using the "Associate your existing ORCID iD" button.

ORCIDs can also be used if authors wish to communicate to readers up-to-date information about how they wish to be addressed or referred to (for example, they wish to include pronouns, additional titles, honorifics, name variations, etc.) alongside their published articles. We encourage authors to make use of the ORCID profile’s “Published Name” field for this purpose. This is entirely optional for authors who wish to communicate such information in connection with their article. Please note that this method is not currently recommended for author name changes: see Cambridge’s author name change policy if you want to change your name on an already published article. See our ORCID FAQs for more information.