Hostname: page-component-7dd5485656-hw7sx Total loading time: 0 Render date: 2025-10-31T09:05:31.971Z Has data issue: false hasContentIssue false
  • English
  • Français

Numerical investigation of spherical indentation on elastic-power-law strain-hardening solids with non-equibiaxial residual stresses

Published online by Cambridge University Press:  29 January 2019

Taihua Zhang ,
Wenqiang Cheng ,
Guangjian Peng Open the ORCID record for Guangjian Peng [Opens in a new window] ,
Yi Ma ,
Weifeng Jiang ,
Jiangjiang Hu  and
Heng Chen
Taihua Zhang
Affiliation:
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
Wenqiang Cheng
Affiliation:
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
Guangjian Peng*
Affiliation:
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
Yi Ma
Affiliation:
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
Weifeng Jiang
Affiliation:
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
Jiangjiang Hu
Affiliation:
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
Heng Chen
Affiliation:
College of Mechanical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
*
Address all correspondence to Guangjian Peng at penggj@zjut.edu.cn
Get access

Abstract

The finite element simulations show that non-equibiaxial residual stresses (RS) can shift the load–depth curve from the unstressed curve and cause elliptical remnant indentation in spherical indentation. Thus the relative load change between stressed and unstressed samples and the asymmetry of elliptical remnant indentation were employed as characteristic parameters to evaluate the magnitude and directionality of RS. Through theoretical and numerical analysis, the effects of RS on indentation load and remnant impression as well as the affect mechanism were systematically discussed. Finally, two equations which could provide foundations for establishing spherical indentation method to evaluate non-equibiaxial RS were obtained.

Information

Type
Research Letters
Information
MRS Communications , Volume 9 , Issue 1 , March 2019 , pp. 360 - 369
Copyright
Copyright © Materials Research Society 2019 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

1.Lu, J.: Handbook of Measurement of Residual Stresses (The Fairmont Press, Lilburn, Georgia, 1996).Google Scholar
2.Suresh, S. and Giannakopoulos, A.E.: A new method for estimating residual stresses by instrumented sharp indentation. Acta Mater. 46, 5755 (1998).Google Scholar
3.Tsui, T.Y., Oliver, W.C., and Pharr, G.M.: Influences of stress on the measurement of mechanical properties using nanoindentation: Part I. Experimental studies in an aluminum alloy. J. Mater. Res. 11, 752 (1996).Google Scholar
4.Taljat, B. and Pharr, G.M.: Measurement of residual stress by load and depth sensing spherical indentation. Mater. Res. Soc. Symp. Proc. 594, 519 (2000).Google Scholar
5.Carlsson, S. and Larsoon, P.-L.: On the determination of residual stress and strain fields by sharp indentation testing. Part I: Theoretical and numerical analysis. Acta Mater. 49, 2179 (2001).Google Scholar
6.Swadener, J.G., Taljat, B., and Pharr, G.M.: Measurement of residual stress by load and depth sensing indentation with spherical indenters. J. Mater. Res. 16, 2091 (2001).Google Scholar
7.Giannakopoulos, A.E.: The Influence of Initial elastic surface stresses on instrumented sharp indentation. J. Appl. Mech. 70, 638 (2003).Google Scholar
8.Lu, Z.K., Feng, Y.H., Peng, G.J., Yang, R., Huan, Y., and Zhang, T.H.: Estimation of surface equi-biaxial residual stress by using instrumented sharp indentation. Mater. Sci. Eng. A 614, 264 (2014).Google Scholar
9.Xiao, L., Ye, D., and Chen, C.: A further study on representative models for calculating the residual stress based on the instrumented indentation technique. Comput. Mater. Sci. 82, 476 (2014).Google Scholar
10.He, M., Huang, C.H., Wang, X.X., Yang, F., Zhang, N., and Li, F.G.: Assessment of the Local Residual Stresses of 7050-T7452 Aluminum Alloy in microzones by the instrumented indentation with the Berkovich Indenter. J. Mater. Eng. Perform. 26, 4923 (2017).Google Scholar
11.Pham, T.-H. and Kim, S.-E.: Determination of equi-biaxial residual stress and plastic properties in structural steel using instrumented indentation. Mater. Sci. Eng. A 688, 352 (2017).Google Scholar
12.Fardin, V.P., Bonfante, E.A., Coelho, P.G., Janal, M.N., Tovar, N., Witek, L., Bordin, D., and Bonfante, G.: Residual stress of porcelain-fused to zirconia 3-unit fixed dental prostheses measured by nanoindentation. Dent. Mater. 34, 260 (2018).Google Scholar
13.Peng, G., Lu, Z., Ma, Y., Feng, Y., Huan, Y., and Zhang, T.: Spherical indentation method for estimating equibiaxial residual stress and elastic–plastic properties of metals simultaneously. J. Mater. Res. 33, 884 (2018).Google Scholar
14.Chen, J., Liu, J., and Sun, C.: Residual stress measurement via digital image correlation and sharp indentation testing. Opt. Eng. 55, 124102 (2016).Google Scholar
15.Kim, Y.-C., Choi, M.-J., Kwon, D., and Kim, J.-Y.: Estimation of principal directions of Bi-axial residual stress using instrumented Knoop indentation testing. Met. Mater. Int. 21, 850 (2015).Google Scholar
16.Rickhey, F., Lee, J.H., and Lee, H.: A contact size-independent approach to the estimation of biaxial residual stresses by Knoop indentation. Mater. Des. 84, 300 (2015).Google Scholar
17.Lee, Y.-H. and Kwon, D.: Estimation of biaxial surface stress by instrumented indentation with sharp indenters. Acta Mater. 52, 1555 (2004).Google Scholar
18.Shen, L., He, Y., Liu, D., Gong, Q., Zhang, B., and Lei, J.: A novel method for determining surface residual stress components and their directions in spherical indentation. J. Mater. Res. 30, 1078 (2015).Google Scholar
19.Kim, Y.-C., Ahn, H.-J., Kwon, D., and Kim, J.-Y.: Modeling and experimental verification for non-equibiaxial residual stress evaluated by Knoop indentations. Met. Mater. Int. 22, 12 (2016).Google Scholar
20.Ahn, H.-J., Kim, J.-H., Xu, H., Lee, J., Kim, J.-Y., Kim, Y.-C., and Kwon, D.: Directionality of residual stress evaluated by instrumented indentation testing using wedge indenter. Met. Mater. Int. 23, 465 (2017).Google Scholar
21.Han, J.H., Lee, J.S., Lee, Y.H., Choi, M.J., Lee, G., Kim, K.H., and Kwon, D.: Residual stress estimation with identification of stress directionality using instrumented indentation technique. Key Eng. Mater. 345–346, 1125 (2007).Google Scholar
22.Choi, M.-J., Kang, S.-K., Kang, I., and Kwon, D.: Evaluation of nonequibiaxial residual stress using Knoop indenter. J. Mater. Res. 27, 121 (2011).Google Scholar
23.Hertz, H.: Miscellaneous Papers (Macmillan, London, 1896).Google Scholar
24.Johnson, K.L.: Contact Mechanics (Cambridge University Press, Cambridge, UK, 1985).Google Scholar
25.Brand, L.: The Pi theorem of dimensional analysis. Arch. Ration. Mech. Anal. 1, 35 (1957).Google Scholar
26.Yu, C., Feng, Y.H., Yang, R., Peng, G.J., Lu, Z.K., and Zhang, T.H.: An integrated method to determine elastic–plastic parameters by instrumented spherical indentation. J. Mater. Res. 29, 1095 (2014).Google Scholar
27.Ni, W.Y., Cheng, Y.T., Cheng, C.M., and Grummon, D.S.: An energy-based method for analyzing instrumented spherical indentation experiments. J. Mater. Res. 19, 149 (2004).Google Scholar
28.Zhang, T., Yu, C., Peng, G., and Feng, Y.: Identification of the elastic–plastic constitutive model for measuring mechanical properties of metals by instrumented spherical indentation test. MRS Commun. 7, 221 (2017).Google Scholar
Supplementary material: File

Zhang et al. supplementary material

Figures S1-S6

Download Zhang et al. supplementary material(File)
File 6.5 MB