Hostname: page-component-8448b6f56d-wq2xx Total loading time: 0 Render date: 2024-04-19T02:17:35.330Z Has data issue: false hasContentIssue false

Aluminum Nitride Chip Carrier for Micro-electro-mechanical Sensor Applications

Published online by Cambridge University Press:  11 February 2011

T. F. Marinis
Affiliation:
Draper Laboratory, 555 Technology Square, Cambridge, MA 02139–3563, U.S.A.
J. W. Soucy
Affiliation:
Draper Laboratory, 555 Technology Square, Cambridge, MA 02139–3563, U.S.A.
Get access

Abstract

A commercially fabricated aluminum nitride chip carrier was evaluated for packaging various types of MEMS inertial sensors. They were successfully assembled and vacuum-sealed within AlN chip carriers and their pressures have remained stable for over one year. Aging tests were conducted under electrical bias at 85°C and 85 %RH. The leakage currents were not as stable as those measured in alumina chip carriers and post test inspection of the AlN parts revealed etching of the ceramic between conductors.

Type
Research Article
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Electronic Packaging Materials and Their Properties, Pecht, M. et. al. eds., CRC Press, Inc., Boca Raton, FL, p. 53 Google Scholar
3 Kyocera Corporation, AN75W material characteristicsGoogle Scholar
5 Kurihara, Y. et. al., IEEE Trans CHMT, 13, (2) 1990, p. 306 Google Scholar
6 Luh, E. et. al., IEEE CHMT, 14, (3) 1991, p. 538 Google Scholar
7 Handbook of Chemistry and Physics, 63rd edition, CRC Press, Inc., Boca Raton, FL, pp. D53–D80Google Scholar