Hostname: page-component-cb9f654ff-hqlzj Total loading time: 0 Render date: 2025-08-22T01:44:41.571Z Has data issue: false hasContentIssue false
  • English
  • Français

Texture of Sputtered Thin Copper Films on Amorphous SiO2 and Si3N4 substrates.

Published online by Cambridge University Press:  21 March 2011

Brando Okolo ,
Udo Welzel ,
Peter Lamparter ,
Thomas Wagner  and
Eric J. Mittemeijer
Brando Okolo
Affiliation:
Max Planck Institute for Metals Research, Seestrasse 92, Stuttgart D-70174, Germany.
Udo Welzel
Affiliation:
Max Planck Institute for Metals Research, Seestrasse 92, Stuttgart D-70174, Germany.
Peter Lamparter
Affiliation:
Max Planck Institute for Metals Research, Seestrasse 92, Stuttgart D-70174, Germany.
Thomas Wagner
Affiliation:
Max Planck Institute for Metals Research, Seestrasse 92, Stuttgart D-70174, Germany.
Eric J. Mittemeijer
Affiliation:
Max Planck Institute for Metals Research, Seestrasse 92, Stuttgart D-70174, Germany.
Get access

Abstract

Cu films with thickness of 500nm and 5nm have been sputter deposited on amorphous SiO2 and Si3N4 substrates without and after sputter cleaning. The crystallographic texture has been characterized by x-ray diffraction techniques. Sputter cleaning of the substrates, by which the oxygen contaminants are removed from the Si3N4 substrates, leads to an increase in the {111} texture strength and sharpness of the Cu films on Si3N4. The texture is sharper in the 500nm thick Cu films than in the 5nm thick films. Roughness differences of the substrate surfaces have no obvious effect on the texture state.

Information

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 695: Symposium L – Thin Films: Stresses and Mechanical Properties IX , 2001 , L2.9.1
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Article purchase

Temporarily unavailable

References

REFERENCES

[1] Tracy, D.P. and Knorr, D.B.; J. Electron. Mater., 22, 6, 1993, pp 611–616.Google Scholar
[2] Knorr, D.B. and Tracy, D.P.; Mater. Chem. Phys., 41, 1995, pp 206–216.Google Scholar
[3] Rodbell, K.P., Knorr, D.B. and Mis, J.D.; J. Electro. Mater., 22, 6, 1993, pp 597–606.Google Scholar
[4] Tsuji, Y., Gasser, S.M., Kolawa, E. and Nicolet, M.-A; Thin Solid Films, 350, 1999, pp 1–4.Google Scholar
[5] J.M.E. Harper and Rodbell, K.P.; J. Vac. Sci. Technol. B, 15, 4, 1997, pp 763–779.Google Scholar
[6] Welzel, U. and Leoni, M., Use of polycapillary X-ray lenses in the X-ray diffraction measurement of texture (submitted to Journal of Applied Crystallography).Google Scholar