Non-technical Summary
Complex enamel ridges have evolved multiple times on the teeth of unrelated aquatic predators, including extinct marine reptiles, toothed whales, crocodilians, and aquatic-feeding dinosaurs. Their appearance in such a wide range of groups suggests that they are a specialized structure adapted to perform specific functions in the capture and/or processing of prey, although these functions are unknown. This study used computer modeling to apply bite force simulations to a set of digital tooth models in order to identify whether the ridges strengthened the tooth. These models enabled us to visualize how bite force stress is distributed around smooth teeth compared with ridged teeth, including a range of ridge types. Our results suggested that the ridges do not strengthen the tooth crown overall, indicating that they may instead serve another role in prey handling.
Introduction
Geological time has borne witness to many reinvasions of the aquatic environment by lineages of terrestrial tetrapods (Fish Reference Fish2016). These reinvasions were dependent upon a variety of evolutionary shifts in morphological and behavioral traits (Fish Reference Fish2016; Houssaye and Fish Reference Houssaye and Fish2016). The return to aquatic environments placed immense selective pressure on the terrestrial Bauplan, resulting in widespread convergence of morphological traits between secondarily aquatic tetrapods (Howell Reference Howell1930; Braun and Reif Reference Braun and Reif1985; Thewissen and Nummela Reference Thewissen, Nummela, Thewissen and Nummela2008; Houssaye and Fish Reference Houssaye and Fish2016). Although recent research into aquatic-feeding predators has focused on the dietary significance of tooth shape (Lukeneder and Zverkov Reference Lukeneder and Zverkov2020; Sulcova et al. Reference Sulcova, Zahradnicek, Dumkova, Dosedelova, Krivanek, Hampl and Kavkova2020; Fischer et al. Reference Fischer, Bennion, Foffa, MacLaren, McCurry, Melstrom and Bardet2022), little is known about the function of crown surface morphology. This gap is particularly evident in the case of apicobasal ridges, longitudinal enamel ridges present in several clades of secondarily aquatic amniotes (McCurry et al. Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019) (Fig. 1). The structural makeup of these ridges varies between taxa; cross-sectional analysis by McCurry et al. (Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019) demonstrates that in plesiosaurs, the ridges do not extend into the dentine, resulting in thicker enamel at their peaks, which may be due to differential growth rates between enamel types (Sander Reference Sander1999, Reference Sander, Teaford, Smith and Ferguson2000). In other clades, including spinosaurids, odontocetes, and crocodilians, the intersection between dentine and enamel extends parallel to the outer surface of the ridges (McCurry et al. Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019). In ichthyosaurs, the ridges mirror an internal dentine folding known as plicidentine, which begins within the crown and extends toward the root (Maxwell et al. Reference Maxwell, Caldwell and Lamoureux2012; McCurry et al. Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019). These disparate structural morphotypes support a convergent result, implying distinct amelogenetic pathways to an analogous trait (Sander Reference Sander1999; McCurry et al. Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019).
Figure 1. Bauplan silhouettes and tooth faces bearing apicobasal ridges from members of six major aquatic-feeding amniote clades. A, Pliosaurus brachydeirus (Plesiosauria) (ROM 5596). B, Pervushovisaurus campylodon (Ichthyosauria) (ROM 00334 A). C, Deinosuchus rugosus (Crocodylia) (USNM 5351). D, Tylosaurus proriger (Mosasauridae) (USNM 3885). E, Spinosaurus sp. (Spinosauridae) (ROM 64659). F, Aetiocetus cotylalveus (Odontoceti) (USNM 25210 Tooth 1). Arrows indicate apicobasal ridges.
Apicobasal ridge morphologies vary in shape, size, and arrangement. The abundance of morphological variation, even within some lower-ranked taxa, suggests that—like crown shape (Massare Reference Massare1987)—ridge morphologies are related to diet rather than clade, although species specificity does occur (Benson et al. Reference Benson, Fitzgerald, Rich and Vickers-Rich2013; Zverkov et al. Reference Zverkov, Fischer, Madzia and Benson2018). One example of this species specificity is the common characterization of plesiosaur teeth by widely spaced, distinct ridges on a smooth surface, with an often trihedral tooth shape (Benson et al. Reference Benson, Fitzgerald, Rich and Vickers-Rich2013; Zverkov et al. Reference Zverkov, Fischer, Madzia and Benson2018).
Some specimens with ridges around the entire crown circumference, such as some Late Cretaceous material previously attributed to Polyptychodon, display density that differs between tooth faces, with lingual ridges clustering more closely than buccal ridges (Madzia Reference Madzia2016). In taxa with trihedral or subtrihedral crown cross sections, ridges may be present on only one or two of the faces, typically excluding the buccal face (Fischer et al. Reference Fischer, Arkhangelsky, Stenshin, Uspensky, Zverkov and Benson2015). These taxa also often trend toward an increased clustering of ridges on the lingual surface (Taylor Reference Taylor1992; Buffetaut Reference Buffetaut2013; Richter et al. Reference Richter, Mudroch and Buckley2013).
The ridges themselves can be high or low relief, varying within individual teeth as well as between species, but remain visually distinct from smooth enamel (Buffetaut Reference Buffetaut2013). Coverage of the apicobasal length is also variable; across taxa, ridges taper off or anastomose anywhere from a few millimeters above the base to directly below the apex (Massare Reference Massare1987; Young et al. Reference Young, Steel, Brusatte, Foffa and Lepage2014; Madzia Reference Madzia2016).
The strength hypothesis is among the most frequently cited hypotheses aiming to explain the function of apicobasal ridges in aquatic feeding strategies. This hypothesis focuses upon the potential for the ridges to strengthen the tooth crown (Preuschoft et al. Reference Preuschoft, Reif and Müller1974; Vaeth et al. Reference Vaeth, Rossman and Shoop1985; Young and Kardong Reference Young and Kardong1996; Schulp Reference Schulp2005; Young et al. Reference Young, Steel, Brusatte, Foffa and Lepage2014; Zverkov et al. Reference Zverkov, Fischer, Madzia and Benson2018), possibly by channeling pressure toward its base and the “valleys” between ridges (Preuschoft et al. Reference Preuschoft, Reif and Müller1974; Rieppel and Labhardt Reference Rieppel and Labhardt1979; Sander Reference Sander1999) or by increasing the second moment of area (I), an engineering principle that quantifies the rigidity of a shape and would enable the ridges to act comparably to corrugations in a metal sheet by increasing the load-bearing surface area (Khalid et al., Reference Khalid, Chan, Sahari and Hamouda2004). It should be noted, however, that the latter comparison is somewhat confounded by the addition of dentine below the enamel ridges, increasing I, while metal sheets generally bear no additional material below their corrugations. As the strength hypothesis is only one of several plausible hypotheses, the remainder of which include improving grip on slippery prey and enhancing puncture efficiency (McCurry et al. Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019; Crofts et al. Reference Crofts, Smith and Anderson2020), testing is required to better understand the physical capabilities of the ridges and any strength advantages they may have conferred.
Here we aim to assess the impact of apicobasal ridges on the ability of the tooth crown to resist various loading conditions, through the application of finite element analysis (FEA). We compare von Mises stress responses across a range of typical apicobasal ridge morphologies, analyzing the influence of ridge shape, size, and arrangement on crown strength. Furthermore, we use comparative morphometrics to evaluate morphological variation in apicobasal ridges and determine whether morphologies are clustered by phylogeny. Although ridge morphology is relatively well documented in plesiosaurs (Benson et al. Reference Benson, Fitzgerald, Rich and Vickers-Rich2013; Fischer et al. Reference Fischer, Arkhangelsky, Stenshin, Uspensky, Zverkov and Benson2015; Madzia Reference Madzia2016; Zverkov et al. Reference Zverkov, Fischer, Madzia and Benson2018), our knowledge of trends in other taxa, such as odontocetes, ichthyosaurs, and mosasaurs, is currently limited and may be expanded through this study.
Materials and Methods
Specimen Selection and Imaging
Forty-eight individual tooth specimens were selected to represent six major clades of aquatic-feeding amniotes (Plesiosauria, Ichthyosauria, Crocodylia, Mosasauridae, Spinosauridae, and Odontoceti) (Appendix 1). Specimen selection was informed primarily by preservation, excluding worn and damaged specimens for which a cross section could not be measured. As only one set of specimens (ROM 12809 Tooth A–F) was originally found in partial articulation, all specimens in the dataset have been treated as isolated teeth. We were unable to assign positions within the jaw for each tooth due to the prevalence of homodont dentition in marine reptiles (Ciampaglio et al. Reference Ciampaglio, Wray and Corliss2005). While position along the toothrow affects the amount of force experienced by a crown (Bourke et al. Reference Bourke, Wroe, Moreno, McHenry and Clausen2008; Cohen et al. Reference Cohen, Weller and Summers2020), it is less likely to affect potential directions of force (lateral and vertical). As this study compares responses to directional force, jaw position is unlikely to greatly affect the results. Specimens were instead selected to portray a variety of ridge and crown morphologies.
The specimens were drawn from the collections of four museums. High-resolution microcomputed tomography and neutron imaging were utilized by previous researchers to digitize the specimens (McCurry et al. Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019). This process was completed using either Nikon Metrology's combined 225/450 kV microfocus X-ray and computed tomography (CT) walk-in vault system at Chesapeake Testing in Belcamp, Md., U.S.A., or the DINGO neutron beamline at Australia's Nuclear Science and Technology Organisation (ANSTO) in Lucas Heights, NSW, Australia (McCurry et al. Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019). The teeth were then digitally isolated from the CT scan and exported as three-dimensional surface models in STL (standard triangular language) format by previous researchers (McCurry et al. Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019).
Institutional Abbreviations
KKF: Kronosaurus Korner, Richmond, QLD, Australia; NHM: Natural History Museum, London, U.K.; ROM: Royal Ontario Museum, Toronto, ONT, Canada; and USNM: National Museum of Natural History, Smithsonian Institution, Washington, D.C., U.S.A.
Data Collection
The three-dimensional models were orientated within a Cartesian coordinate system and measured in Rhino v. 6 (McNeel Reference McNeel2019). Crown height was recorded from the enamel dentine junction to the apex of the crown (Fig. 2, Appendix 2). Where the apex was incomplete, measurement concluded at the highest point of the crown to avoid overestimation of crown height, although we acknowledge this would also result in a slight underestimation within some specimens. Crown width was recorded at the widest point of the crown for both the labiolingual and mesiodistal orientations (Fig. 2, Appendix 2). For mold fossil specimens that lacked a three-dimensional crown, width was recorded only for the visible orientation.
Figure 2. Standard measurements recorded for fossilized tooth specimens. A, Crown height and position of lateral cross section at 50% of the height (dotted line). B, Crown width measurements (both mesiodistal and labiolingual). C, Apicobasal ridge height and apicobasal ridge width within a cross-section outline (not to scale). Demonstrated on a Bottosaurus sp. tooth crown (USNM 508536).
Ridge height and width measurements were taken for 10 ridges per tooth across a lateral cross section of the crown at 50% of its height (Appendix 3). The apicobasal span of the ridges was recorded as a percentage of the total crown height (Appendix 2). If a cross section bore more than 10 ridges, 10 were randomly selected for data collection. If fewer than 10 ridges were identified, the specimen was excluded from the ridge measurement section of the study. The overall count of ridges around the circumference of the cross section were recorded, regardless of whether the tooth was included in the measurement section, to gain a holistic understanding of ridge count across all taxa. Carinae were not classified as apicobasal ridges for the purposes of this study, as they are commonly accepted to be separate structures differing in abundance and relief (Young et al. Reference Young, Steel, Brusatte, Foffa and Lepage2014; Hendrickx et al. Reference Hendrickx, Mateus and Araújo2015; McCurry et al. Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019). All linear measurements were log transformed in R v. 4.0.4 (R Core Team 2021) to conform to a normal distribution and to visualize morphological differences between specimens that vary considerably in the analyzed traits.
Analysis of Ridge Morphology
Linear Regression Models
A range of morphological variables measured on the specimens were fit to linear regression models to investigate the dental diversity of aquatic-feeding amniotes and identify taxon-specific traits. The use of linear regression models allows an evaluation of variance in all relationships of potential interest and provides insight into isometry or allometry within the scaling mechanics of the ridges. The compared variables included relative apicobasal ridge height and width, crown height and width, and ridge count. Relative ridge measurements were included to ensure the exclusion of size bias and were calculated by dividing each tooth's average ridge height or width by the crown height or width respectively. The labiolingual and mesiodistal crown width measurements were averaged to provide a representative singular width for the regression models. All models utilizing count data were analyzed using a generalized linear model with a quasi-Poisson distribution to accommodate this type of data and variance dispersion. All regression models were conducted and plotted in R v. 4.0.4 (R Core Team 2021).
Taxonomic Variance in Ridge Morphology
To determine any significant differences between the average ridge data of the six aquatic-feeding amniote groups examined in this study, univariate Kruskal-Wallis tests were performed in R v. 4.0.4 (R Core Team 2021). These variance tests were run on data for relative crown height, relative crown width, and ridge count across all six groups. All R scripts are available in the Supplementary Material.
FEA
FEA is a numerical technique enabling the digital simulation of directional force across mechanical components of complex structures (Clough Reference Clough1990; Dumont et al. Reference Dumont, Piccirillo and Grosse2005). In FEA software, the visualization of stress and strain is directed by the application of load cases and constraints in contextually relevant positions across a model (Dumont et al. Reference Dumont, Piccirillo and Grosse2005). Our study conducted FEA upon digital tooth crown models to determine the impact of apicobasal ridges upon overall crown strength. These tests utilized von Mises stress distributions to compare model performance under the simulation of various loading conditions. Von Mises stress is often incorporated into biological model analyses to establish potential failure points under a ductile model of fracture or a model in which deformation precedes breakage (Dumont et al. Reference Dumont, Grosse and Slater2009; Rajabizadeh et al. Reference Rajabizadeh, Van Wassenbergh, Mallet, Rücklin and Herrel2021). Although we acknowledge that enamel and dentine conform to a brittle pattern of fracture, thus making von Mises stress unsuitable to predict their failure points, it does offer a thorough visualization of stress distribution for these materials (Neves et al. Reference Neves, Coutinho, Alves and de Assis2015) and is frequently used as such in biomechanical analyses of teeth (Whitenack et al. Reference Whitenack, Simkins and Motta2011; Palci et al. Reference Palci, LeBlanc, Panagiotopoulou, Cleuren, Abraha, Hutchinson, Evans, Caldwell and Lee2021; Rajabizadeh et al. Reference Rajabizadeh, Van Wassenbergh, Mallet, Rücklin and Herrel2021; Pollock et al. Reference Pollock, Panagiotopoulou, Hocking and Evans2022). Thus, to enable a comparison between our results and similar biological studies, we have utilized von Mises stress to visualize our stress distribution. All FEA was completed using Strand7 v. 2.4.6.Footnote *
Model Creation
The tooth crown and apicobasal ridge data were used as a foundation for the construction of a digital set of seven three-dimensional tooth crown models in Rhino v. 6 (Fig. 3; see Supplementary Material). To reflect the scope of tooth crown morphologies within the dataset, the models were based on two of the most widespread crown shapes in aquatic-feeding dentition (conical and recurved). Common variations in ridge size and shape were re-created on conical models, while variations in ridge arrangement were re-created on recurved models to replicate the range documented in recurved teeth (Taylor Reference Taylor1992; Buffetaut Reference Buffetaut2013; Richter et al. Reference Richter, Mudroch and Buckley2013).
Figure 3. Comparison between select examples of ridged and smooth digital tooth models. A, Average Ridges model (ridge width = 0.663 mm, ridge height = 0.136 mm). B, No Ridges (Conical) model. C, Symmetrical Ridges model. D, No Ridges (Recurved) model. All models are in mesial view.
The Average Ridges model represents the average ridge measurements, the height and width of which were applied to all models except the Large Ridges model, which instead bears both wider and taller ridges matching the maximum recorded dimensions. The Rounded Ridges model exemplifies ridges with a rounded cross section. The Lingual Clustering model bears ridges only on the recurved lingual face, while the Symmetrical Ridges model represents recurved teeth with ridges around the entire circumference.
Although many fossil specimens have ridges of varying lengths along the crown, all ridges in our models ended at 72% of the crown height (the proportional average) to ensure standardization. Control models without ridges were created for both tooth shapes to enable a comparison between identical teeth with and without ridges (Fig. 3). All models were designed to fit the average crown height and width to eliminate size bias. Although ridge shape can manifest as triangular or rounded in cross section, depending on taxon (McCurry et al. Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019), triangular ridges were used as the default ridge shape due to the challenges in modeling rounded ridges.
Meshing and Scaling
Each model was imported as an STL surface mesh into Strand7 v. 2.4.6. The models were cleaned and automatically remeshed to a new surface mesh of three-noded triangular plate elements. This methodology reduces warping and allows the accurate application of geometry in complex areas (Dumont et al. Reference Dumont, Piccirillo and Grosse2005). The refined surface mesh was then used as a base to create a solid mesh of four-noded tetrahedral elements, and the plate elements were deleted upon completion. All models were scaled to the same surface area, as previous research indicates that scaling to surface area will return a consistent stress energy across models of different sizes and surface areas (Dumont et al. Reference Dumont, Grosse and Slater2009).
Material Properties
As dentine comprises the bulk of the crown mass and aids in the dissipation of force, the mechanical properties of dentine are applied to the mesh, in line with previous studies (Jansen van Vuuren et al. Reference Jansen van Vuuren, Kieser, Dickenson, Gordon and Fraser-Miller2016). These parameters were utilized for both the Young's modulus (E = 18,000 MPa) and Poisson's ratio (v = 0.31) (Bensonne et al. Reference Bensonne, Bodereau, Cabanillas and Dominguez2014). It is possible that the applied properties do not accurately represent the enamel structure of the crown, due to the differing compressive and tensile strength of enamel and dentine (Milewski Reference Milewski2005). This is exacerbated by the taxonomic differences in the thickness and arrangement of enamel, from the thickened ridges in plesiosaurs to the plicidentine of ichthyosaurs (McCurry et al. Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019), as these compositional disparities may have biomechanical effects due to the higher force resistance of dentine and higher wear resistance in enamel (Chun et al. Reference Chun, Choi and Lee2014). Although a recent study found that the material properties of dentine and enamel did not differ enough to affect von Mises stress distributions in reptile mandibles when enamel thickness was altered (Herbst et al. Reference Herbst, Lautenschlager, Bastiaans, Miedema and Scheyer2021), it is possible that an effect would have been present in a smaller area localized only upon the tooth. While the internal homogeneity of our models is, as such, a potential limitation, the study makes an assumption similar to that of Dumont et al. (Reference Dumont, Grosse and Slater2009) due to the difficulties of accurately representing and modeling the range of internal heterogeneity. Accordingly, we predict that the effects of internal tissue properties would be consistent across all models and treat tooth material properties as homogenous, as in recent literature (Palci et al. Reference Palci, LeBlanc, Panagiotopoulou, Cleuren, Abraha, Hutchinson, Evans, Caldwell and Lee2021; Pollock et al. Reference Pollock, Panagiotopoulou, Hocking and Evans2022).
Constraints and Load Cases
For the application of realistic constraints, each tooth model was fixed along the degrees of translation and three degrees of rotation by the external nodes across the entire base. This corresponds to the lack of axial displacement that would have been present in the tooth socket.
Load cases were comprised of three primary directional pressures, each simulating a direction of stress that could have been experienced during prey capture, incapacitation, or processing. The primary three load cases were Bite (−40 N per node on the z-axis), Shake (40 N per node on the y-axis), and Pull (−40 N per node on the x-axis) (Fig. 4). Two further load cases called Bite and Shake and Bite and Pull combined the prior individual cases to analyze the effects of multiple simultaneous forces. In each of the five load cases, the force loads were applied to the topmost five nodes of each model's apex. While we acknowledge that confining force application to the apex does not encompass a full representation of conditions where the tooth is embedded in prey, it does allow us to model the effects of force applied through a hard surface, such as when the tip of a tooth contacts bone, where any additional strength conferred by ridges would be most relevant.
Figure 4. Finite element solid mesh models demonstrating directions of load cases and constraints. All models are Average Ridges model. A, Bite load case from the crown's apex (arrow) and constraint nodes (in pink and white). B, Shake load case from the crown's apex (arrow) and constraint nodes (in pink and white). C, Pull load case from the crown's apex (arrow) and constraint nodes (in pink and white). D, Distribution of constraint nodes across the base (in pink and white).
Bite force data are challenging to attain, even for extant species (Koc et al. Reference Koc, Dogan and Bek2010), and are highly correlated to body size (Erickson et al. Reference Erickson, Gignac, Steppan, Lappin, Vliet, Brueggen, Inouye, Kledzik and Webb2012), preventing simple estimation for the isolated teeth in this study. Thus, the above loading units were assigned to standardize the applied bite force between models. As this study seeks to compare only the relative performances of models, the standardization of loads without precise bite force data is appropriate to provide an accurate result (Dumont et al. Reference Dumont, Grosse and Slater2009).
The Bite load case was informed by the expected pressures of a typical vertical bite, involving the forceful closure of the mandible documented in a range of vertebrate predators, including crocodilians (Araújo and Polcyn Reference Araújo and Polcyn2013). The Shake load case aimed to test the response of teeth to the lateral-shake feeding strategy observed in crocodilians, proposed for the pliosauroid Rhomaleosaurus due to similarities with crocodilian cranial morphology (Taylor Reference Taylor1992). Similarly, the Pull load case was implemented to test the models’ response to the backward pulling movements noted in modern crocodilian feeding (Gallagher et al. Reference Gallagher, Papastamatiou and Barnett2018). Each of the Bite, Shake, and Pull load cases were applied and assessed on each model separately to obtain an understanding of how the models responded to these pressures individually. However, the inclusion of the Bite and Shake and the Bite and Pull load cases ensured an evaluation of the models’ performance under more biologically accurate conditions.
FEA Contour Maps
Each solid mesh was solved as a linear static model, calculating brick stress for both internal and external bricks. The results were displayed as von Mises stress distribution maps, in which concentrations of warm colors indicated high-stress areas, while concentrations of cool colors indicated low-stress areas. Statistical tests of these maps were omitted from this study due to inaccurate conclusions resulting from differences in brick size within and between models.
Results
Crown and Ridge Measurements
From the collected measurements, the average tooth crown height was 32 mm, while the average crown width was calculated as 18.136 mm mesiodistally and 17.917 mm labiolingually. The average absolute apicobasal ridge height and width were calculated as 0.136 mm and 0.663 mm, respectively, and the average ridge extends along approximately 72% of the height of the tooth crown. The average tooth bore 26 apicobasal ridges that reached at least 50% of its height. These measurements were utilized to create the seven theoretical digital tooth models representing the scope of common tooth morphologies in extinct aquatic-feeding amniotes.
Analysis of Ridge Morphology
Linear Regression Models
Regression analysis showed a positive correlation between the average ridge height and crown height (p < 0.001, R 2 = 0.26) (Fig. 5A) and between the average ridge width and crown width (p < 0.001, R 2 = 0.43) (Fig. 5B). The regression slope (b) is less than 1 in both the height (b = 0.094) and width (b = 0.285) regressions. Both averages were calculated from relative measurements.
Figure 5. Linear regression models for apicobasal ridge measurements and tooth crown size in aquatic-feeding amniotes. A, Relative average apicobasal ridge height and crown height. B, Relative average apicobasal ridge width and crown width. Predicted slope of isometry falls outside the visualized datasets.
A negative correlation was found between average relative ridge width and ridge count (p = 0.003, t = −3.114). However, there was no significant correlation found between relative average ridge height and ridge count (p = 0.067, t = −1.883).
Taxonomic Variance in Ridge Morphology
The univariate Kruskal-Wallis tests returned no statistically significant difference between the average relative ridge height (chi-squared = 7.897, p = 0.162, df = 5) or the average relative ridge width (chi-squared = 6.241, p = 0.284, df = 5) of the six taxonomic groups examined within the dataset. Furthermore, no statistically significant difference was found between the average ridge counts for these six groups (chi-squared = 1.691, p = 0.89, df = 5).
FEA Contour Maps
The contour maps (Figs. 6–10) show a near-identical distribution of von Mises stress across models of the same tooth shape. Although ridged models show a slightly increased stress distribution within the ridges themselves, the interjacent smooth enamel retains a similar vertical stress gradient across the crown throughout both smooth and ridged models, as well as across all ridge morphologies. As this overall gradient does not differ, it does not appear that the slightly heightened stress in ridges relieves stress within the crown.
Figure 6. Finite element analysis (FEA) maps for the Bite load case. Models depict von Mises stress distribution for: A, No Ridges (Conical) model; B, Average Ridges model; C, Large Ridges model; D, Rounded Ridges model; E, No Ridges (Recurved) model; F, Symmetrical Ridges model; G, Lingual Clustering model. All models are depicted in occlusal view. High stress is represented by warmer colors, while low stress is represented by cooler colors. Areas of white denote stress values higher than 1.5 × 101. +V indicates vertical load force has been applied on all models.
Figure 7. Finite element analysis (FEA) maps for the Shake load case. Models depict von Mises stress distribution for: A, No Ridges (Conical) model; B, Average Ridges model; C, Large Ridges model; D, Rounded Ridges model; E, No Ridges (Recurved) model; F, Symmetrical Ridges model; G, Lingual Clustering model. All models are shown in occlusal view. Areas of white denote stress higher than 2 × 102. Arrows indicate direction of applied load force on all models.
Figure 8. Finite element analysis (FEA) maps for the Bite and Shake load case. Models depict von Mises stress distribution for: A, No Ridges (Conical) model; B, Average Ridges model; C, Large Ridges model; D, Rounded Ridges model; E, No Ridges (Recurved) model; F, Symmetrical Ridges model; G, Lingual Clustering model. All models are shown in occlusal view. Areas of white denote stress higher than 2 × 102. Arrows indicate direction of applied load force on all models. +V indicates vertical load force has been applied on all models.
Figure 9. Finite element analysis (FEA) maps for the Pull load case. Models depict von Mises stress distribution for: A, No Ridges (Conical) model; B, Average Ridges model; C, Large Ridges model; D, Rounded Ridges model; E, No Ridges (Recurved) model; F, Symmetrical Ridges model; G, Lingual Clustering model. All models are shown in occlusal view. Areas of white denote stress higher than 2 × 102. Arrows indicate direction of applied load force on all models.
Figure 10. Finite element analysis (FEA) maps for the Bite and Pull load case. Models depict von Mises stress distribution for: A, No Ridges (Conical) model; B, Average Ridges model; C, Large Ridges model; D, Rounded Ridges model; E, No Ridges (Recurved) model; F, Symmetrical Ridges model; G, Lingual Clustering model. All models are shown in occlusal view. Areas of white denote stress higher than 2 × 102. Arrows indicate direction of applied load force on all models. +V indicates vertical load force has been applied on all models.
Bite Load Case
Under the Bite load case, conical models exhibit high stress concentrations around the apex with an even gradient of stress reduction down the crown (Fig. 6A–D). This longitudinal stress reduction occurs at an equal rate in all conical models. Some slightly higher stress values appear to be concentrated on the ridges, presenting more prominently around the middle of the Large Ridges model (Fig. 6C).
In recurved models, the higher stress values are located along the lingual face of the crown despite the application of force in the middle of the apex (Fig. 6E–G). This trend occurs in all recurved models under the Bite load case. The overall distribution of stress again appears almost identical across all recurved models, with most of the stress concentrated in the lingual tip of the apex and decreasing toward the buccal base, with a slightly increased stress in the ridges.
Shake Load Case
Under the Shake load case, conical models display a bifurcated stress distribution in which stress is concentrated down the lingual and buccal faces (Fig. 7A–D). Despite the application of force toward the buccal surface, the stress distribution is approximately equal between buccal and lingual faces. Stress reduces gradually from the apex to the base, and the overall stress gradients are similar between ridged and smooth models, although again the ridges present with slightly higher values toward the middle of the tooth.
Recurved models display a similar bifurcation of stress that is spread with a slight skew toward the buccal face due to the recurved shape (Fig. 7E–G). As in the conical models, most of the stress is centered on the apex. The stress gradually reduces toward the base, with a small increase in stress particularly around the lingual edge of the base.
Bite and Shake Load Case
Under the Bite and Shake load case, conical models again demonstrate a bifurcated stress distribution, with stress reducing toward the base, but with a skew toward the buccal face (Fig. 8A–D). This skew aligns with the direction of applied force (toward the apical buccal surface). Again, the ridges display slightly higher stress, although the overall gradient of distribution is identical between models.
The recurved models all display a bifurcation of stress with a greater buccal skew, again in line with the direction of applied force (Fig. 8E–G). Although the spread of high stress along the crown height is visibly reduced in contrast to the conical models, it is similar between all of the recurved models, with an extremely slight increase in stress on the lingual ridges.
Pull Load Case
Under the Pull load case, the stress distribution in conical models presents as a reoriented version of the distribution in conical models under the Shake load case, due to the symmetry of the models (Fig. 9A–D). Both ridged and smooth models display a bifurcated distribution in which stress is concentrated equally down the mesial and distal faces, with a slightly increased stress in the ridges.
The bifurcated stress distribution also presents in the recurved models (Fig. 9E–G). As in the conical models, the recurved models show an equal spread of stress down the mesial and distal faces of the crown, with most of the stress centered on the apex. The stress gradually reduces toward the base, although the slight increase in stress in the ridges is more noticeable under this load case than in the Shake case. There are otherwise no substantial differences between the smooth and ridged models within the recurved crown set.
Bite and Pull Load Case
Under the Bite and Pull load case, conical models again demonstrate a bifurcated stress distribution, with stress reducing toward the base, but with a skew in the direction of the applied force (toward the mesial surface) and a slight increase of stress in the ridges (Fig. 10A–D).
The recurved models all display a comparable bifurcation of stress with a mesial skew (Fig. 10E–G). The pattern of slightly higher stress in ridges is more pronounced on the mesial face under the Bite and Pull load case (Fig. 10F–G), in line with the direction of force.
Discussion
Patterns in Ridge Morphology
Linear Regression Models
The positive correlation between apicobasal ridge measurements and tooth crown size indicates a slight trend toward increasing ridge height and width with increasing crown size (Fig. 5). Larger crowns are more likely to develop larger ridges in absolute terms; however, as the regression slope (b) is less than 1 in both models, the relationship between ridge size and crown size is negatively allometric. This suggests that ridges do not develop proportionally to crown size and may be under different selective pressures compared with crown size.
The significant relationship between the relative average ridge width and ridge count (p < 0.001, t = 3.114) is likely a consequence of spatial constraints. In occupying less space, thinner ridges have a capacity to become densely packed and greater in number, whereas wider ridges limit the available enamel and restrict ridge abundance.
Taxonomic Variance in Ridge Morphology
The lack of statistically significant differences in the average apicobasal ridge measurements between groups suggests an absence of taxon-specific ridge morphologies among the measured characteristics. This supports previous hypotheses claiming that phylogeny bears little to no influence upon ridge morphology (Benson et al. Reference Benson, Fitzgerald, Rich and Vickers-Rich2013; Zverkov et al. Reference Zverkov, Fischer, Madzia and Benson2018) within the context of ridge height, width, and count.
Our data do provide insight into the breadth of ridge morphologies displayed throughout the studied taxa. Some plesiosaurs have developed low-abundance, high-relief, and lingually clustered ridges (e.g., NHM 2680; NHM 46239 B), while others are characterized by high counts of finer ridges (e.g., ROM 71030; ROM 71033). Crocodilian ridge morphologies are among the most variable, ranging from the high-relief ridges displayed in genera such as Deinosuchus (USNM 5351) and Purussaurus (USNM 205338) to the rounded, low-relief morphologies present in Bottosaurus (USNM 508536). However, one Bottosaurus specimen exhibits one of the most distinctive morphologies of the dataset, in its “rippled” and apically anastomosed ridges (USNM 540758). The low, robust crown shape of such teeth has been hypothesized to assist in the crushing of hard-shelled prey items in Bottosaurus harlani (Cossette and Brochu Reference Cossette and Brochu2018), and although our Bottosaurus specimens have not been identified to species level, the comparable morphology suggests an equivalent function. Although purportedly molluscivorous mosasaurs such as Globidens and Carinodens developed similarly robust and ridged teeth (Schulp Reference Schulp2005), the mosasaurs in this dataset—Mosasaurus missouriensis (USNM 4910) and Tylosaurus proriger (USNM 3885)—bear a recurved dentition to process meat, such as fish (Konishi et al. Reference Konishi, Newbrey and Caldwell2014), with broad, rounded, and low-relief ridges. The ichthyosaurs are the only group in which lingual clustering is universally absent (Appendix 3). Ichthyosaur ridge morphology is also highly conserved, consisting of dense, parallel, and rounded ridges that extend an equal length along the tooth crown (although the exact length differs between specimens). The few spinosaurid specimens in the dataset present wider, low-relief ridges (Appendix 3), but descriptions of various spinosaurid dentitions suggest a diversity of ridge morphologies (Buffetaut Reference Buffetaut2013). Odontocetes bear some of the most unique ridge morphologies in the dataset, ranging from discontinuous ridges that present as elongated bumps (USNM 25210 Tooth 2) to basally or exceptionally anastomosed ridges (USNM 25210 Tooth 1; USNM 23546) (Appendix 3). Although some rarer ridge morphologies may be considered potentially taxonomically informative, such as the rugose anastomosis in odontocetes, a majority of basic ridge morphologies occur across many clades. Specific combinations of ridge morphologies, such as low-density, high-relief, and lingually clustered ridges in some pliosaurids (e.g., NHM 2680; NHM 46239 B), may provide more taxonomic information than the individual traits analyzed here, but this is beyond the scope of this paper.
FEA
The similarities between von Mises stress distributions suggest that, overall, models of the same crown shape exhibit no substantial difference in their response to force beside a slightly increased stress localized within ridges (Figs. 6–10). The otherwise comparable gradient of stress across the crown indicates that apicobasal ridges have little impact on overall tooth crown strength in these models. While, as mentioned, these results cannot account for internal heterogeneity between enamel and dentine material properties, they demonstrate the lack of influence of the ridges’ external morphology on stress distribution. Furthermore, the general consistency of stress levels across the range of ridge morphologies implies that ridge shape, size, and arrangement do not contribute to a substantial increase in crown strength. While the mechanical cause of the slightly higher stress within ridges is unclear (although it may be attributable to the smaller surface area), the interjacent smooth enamel shows a rate of vertical stress decrease equal to that of smooth models. This similarity between gradients suggests that the ridges do not act to channel stress away from the crown or alleviate its loading in any form.
The overall Bite distribution patterns recorded in our models (both recurved and conical) resemble those documented in comparably shaped teeth in a recent study (Pollock et al. Reference Pollock, Panagiotopoulou, Hocking and Evans2022). Similarly, the bifurcated stress patterns across all teeth in our Shake load case reflect the results under those authors’ equivalent Pull load case (Pollock et al. Reference Pollock, Panagiotopoulou, Hocking and Evans2022), although the highest concentration of stress occurs closer to the base of their models due to the difference in point loading location. Our results further align with those in a previous study on von Mises stress distributions in smooth snake fangs (Rajabizadeh et al. Reference Rajabizadeh, Van Wassenbergh, Mallet, Rücklin and Herrel2021). When recurved models were subjected to vertical loading (equivalent to the Bite load case), the study documented a similar bifurcation of stress with localization on the lingual face of the crown. A lingual localization of stress also appears on the finite element map of a tooth from the extant shark Sphyrna mokarran (Whitenack et al. Reference Whitenack, Simkins and Motta2011). Although the crown of S. mokarran bears a higher degree of labiolingual compression, its overall curvature resembles that of the three recurved models and is thus potentially subject to similar forces under longitudinal load cases. As none of the specimens used in these studies bear visible apicobasal ridges, the similarity between distribution patterns suggests that stress distribution is predominantly a product of crown shape rather than the influence of apicobasal ridges.
Relationships between Stress Distribution and Ridge Locations
The results of the finite element modeling deliver additional insight into the relationships between stress distribution and the position of ridges. If enhanced tooth strength were indeed a significant selective pressure, the centralization of stress upon the apex should lead to a greater need for strength around this region. Apicobasal ridges that increase in prominence toward the apex have been described, but only rarely, such as in the mosasaur Globidens phosphaticus (Bardet et al. Reference Bardet, Pereda Suberbiola, Iarochène, Amalik and Bouya2005) or in teeth from Bottosaurus (USNM 540758) and Gavialosuchus (USNM 244431) in the current dataset. Overall, our morphometrics indicate that the average apicobasal ridge ends at approximately 72% of the height of the tooth crown (Appendix 2). This assessment may even be a slight overestimation, as ridges that ended below the cross section at 50% of the crown height were not able to be included in the sampling pool, and some taxa have developed a number of ridges that disappear beneath this point, including plesiosaurs (NHM 430179; NHM 46239 B), odontocetes (USNM 11962), and crocodilians (USNM 205338). However, as most ridges fail to reach the apex, it is uncertain whether they would increase the second moment of area sufficiently to reduce the chance of buckling.
While the stress concentrations generally do not coincide with the locations of ridges, one exception exists in the recurved tooth shape. McCurry et al. (Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019) suggest that the lingual clustering observed in many recurved teeth could act to dissipate stress created along the lingual face as a product of the recurved shape. When subjected to the Bite load case in this study, all recurved models do exhibit a concentration of stress toward the lingual face (Fig. 6E–G). This pattern conflicts with the results of the conical models, which display a uniform decrease of stress under the same Bite load case (Fig. 6A–D). Although this could indicate that apicobasal ridges are lingually clustered in recurved forms to alleviate the increased stress, in congruence with the hypothesis of McCurry et al. (Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019), the lack of stress reduction in ridged models alludes to another purpose.
As this study investigated only the most common tooth crown shapes in aquatic-feeding amniotes, future research could be conducted into the relationships between stress distribution and ridge locations on less common tooth shapes. Such shapes may consist of the multicusped form found in several extinct odontocetes, including Zygorhiza kochii (USNM 11962) and Aetiocetus cotylalveus (USNM 25210 Tooth 1) or the flattened dentition of the crocodilian Bottosaurus (USNM 540758).
Evaluating the Strength Hypothesis
The strength hypothesis has been widely referenced in the literature on aquatic-feeding tetrapods (Rieppel and Labhardt Reference Rieppel and Labhardt1979; Schulp Reference Schulp2005; Young et al. Reference Young, Steel, Brusatte, Foffa and Lepage2014; Zverkov et al. Reference Zverkov, Fischer, Madzia and Benson2018). However, these claims are based on mechanical theory rather than a quantitative assessment of relevant traits. In Varanus niloticus, an extant varanid bearing apicobasal ridges, the dietary transition from insectivory to molluscivory that occurs at adulthood is associated with the appearance of ridges on the tooth crown (Rieppel and Labhardt Reference Rieppel and Labhardt1979). This ontogenetic shift has been interpreted as an adaptation to strengthen the teeth in response to a more durable prey source, with the ridges channeling pressure down the crown's surface (Rieppel and Labhardt Reference Rieppel and Labhardt1979). As V. niloticus is known to feed predominantly upon aquatic mollusks as well as crabs and amphibians (Dalhuijsen et al. Reference Dalhuijsen, Branch and Alexander2014), it is more probable that the ridges evolved to address a challenge in aquatic feeding, such as reduced grip (Chomba and M'Simuko Reference Chomba and M'Simuko2013), rather than durophagy—a conclusion that is equally applicable to the taxa studied here.
Alternative Hypotheses of Ridge Function
With the support of previous research (Sander Reference Sander1999, Reference Sander, Teaford, Smith and Ferguson2000; McCurry et al. Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019), our results indicate that the improvement of crown strength was unlikely to be a primary function of apicobasal ridges in aquatic-feeding amniotes. Additionally, our findings may shed light on other hypotheses that focus upon the ridges interacting with the prey item, rather than augmenting the crown.
Our data dispute the probability of the puncture hypothesis, which argues that apicobasal ridges may have conferred an advantage in predation by acting as a cutting edge, improving the crown's ability to puncture and quickly entrap prey items (McCurry et al. Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019). While ridges around the apex would provide the most assistance during prey puncture (Vaeth et al. Reference Vaeth, Rossman and Shoop1985; McCurry et al. Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019), our dataset found that most ridges fail to reach the upper quarter of the crown.
Supporting many past findings (Buffetaut Reference Buffetaut2013; Richter et al. Reference Richter, Mudroch and Buckley2013; Young et al. Reference Young, Steel, Brusatte, Foffa and Lepage2014), a variety of tooth specimens in the current dataset display an increased prominence or clustering of apicobasal ridges on the lingual surface of the crown, including the pliosaurids Kronosaurus queenslandicus (KKF 0534) and Liopleurodon ferox (NHM 2680), an indeterminate Spinosaurus species (ROM 64659), and the crocodilian Deinosuchus rugosus (USNM 5351) (Appendix 3). The occurrence of clustering upon the lingual face coincides with the region that contacts maximally with prey items (McCurry et al. Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019). This in turn indicates that ridges may have been adapted primarily for prey interaction (McCurry et al. Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019), as serrated or cutting edges in carnivore teeth are commonly located on areas that contact the substrate to aid in processing (D'Amore Reference D'Amore2009).
The array of characteristics benefiting grip efficiency in aquatic feeders, such as spiricules on the toes of sea eagles (Chomba and M'Simuko Reference Chomba and M'Simuko2013) and sharp, elongate teeth in sharks (Bergman et al. Reference Bergman, Lajeunesse and Motta2017), implies a substantial selective pressure for enhanced grasping mechanisms in these predators. The evolution of the forelimbs into flippers or flipper-like appendages in many secondarily aquatic taxa restricts these clades to grasping with only their jaws. As such, any adaptation for grip improvement would be localized to the cranial region and, due to its direct contact with prey items, would almost certainly involve the dentition. Previous physical testing on the scales of male sea snakes established that increased rugosity resulted in maximized friction and grip (Avolio et al. Reference Avolio, Shine and Pile2006). As this aided the male to maintain contact with the female during copulation in the slippery medium of water (Avolio et al. Reference Avolio, Shine and Pile2006), the addition of apicobasal ridges—particularly rugose morphologies such as in Squalodon cheek teeth (USNM 23546)—could equally assist aquatic predators to grip struggling prey items in the same medium. This is further supported by the development of rugose crown apices in some crocodyliform and ichthyosaur taxa (Massare Reference Massare1987; Fischer et al. Reference Fischer, Clément, Guiomar and Godefroit2011), which may demonstrate a selection for convergent grip morphologies in areas without ridges.
However, a function in prey handling does not parsimoniously account for ridge configurations that remain symmetrical across the entire crown circumference. Such configurations may instead provide evidence for the removal hypothesis, which proposes that apicobasal ridges functioned like anti-stick grooves in a knife, reducing suction to allow the removal of prey caught in the teeth (McCurry et al. Reference McCurry, Evans, Fitzgerald, McHenry, Bevitt and Pyenson2019). Wright et al. (Reference Wright, Kardong and Bentley1979) argued that the need for removal efficiency would be greater on the mesial face of the tooth due to its initial contact with prey, which would provide an advantage in ridges evolving on regions of the tooth with reduced prey contact in comparison to the lingual surface.
Conclusions
This study finds that within typical aquatic-feeding amniote dentition, external apicobasal ridges appear to have little impact upon the ability of the tooth to resist biologically relevant loading. The overall distributions of von Mises stress in finite element maps are highly similar between smooth and ridged tooth crown models of identical shape, differing only in a slightly increased stress localized within ridges, while retaining an equal rate of decreasing stress on areas of smooth enamel. These parallel gradients suggest that the higher-stress ridges do not alleviate crown stress. Furthermore, this trend of similarity persists across all tested ridge morphologies, demonstrating that variation in ridge size, shape, and arrangement around the crown is unlikely to influence the tooth's resistance to failure.
The factors shaping tooth morphology may be related to the selective pressures imposed by predation, such as the need for increased grip on slippery prey, as the variance in intra-taxon ridge morphology supports previous hypotheses that dental ornamentation is more affected by the functional requirements of diet than by phylogenetic grouping.
Our results offer a foundation for future research into other prominent hypotheses of apicobasal ridge function, including improved removal efficiency and enhanced grip. Although our data on tooth crown and ridge morphometrics indicate varying support for these hypotheses across the range of ridge morphologies, further testing is required to explore their biomechanical nuances and return quantifiable evidence. Nevertheless, the absence of stress resistance in our models and the prevalence of lingual clustering in fossil specimens supports the concept that apicobasal ridges evolved for direct contact with prey items, rather than to augment crown robustness.
Acknowledgments
We thank C. Pang, Strand7 Support, for assisting with the final mesh of the Large Ridges model due to software limitations. We thank Macquarie University for providing crucial financial support through the Research Training Program scholarship. We further thank V. Fischer, Université de Liège, S. Lautenschlager, University of Birmingham, and two anonymous reviewers for comments that greatly improved the quality of this manuscript. We also thank J. White, Australian National University, for thoughtful feedback on early drafts of this article.
Competing Interests
The authors declare no competing interests.
Data Availability Statement
Supplementary figure, 3D models, and R scripts are available at Zenodo: https://doi.org/10.5281/zenodo.10681475.
Appendix 1. Specimen List
List of isolated tooth specimens in the six major aquatic-feeding amniote clades measured for this study. Specimens are grouped by taxa.
Appendix 2. Tooth Crown Data
Tooth crown measurements for all tooth specimens. Specimens labeled “Anastomosed” had anastomosed ridges that were impractical to measure for individual length. Specimens labeled “Discontinuous” had discontinuous ridge “patches” that could not be accurately measured for length along the tooth. Specimens labeled “Indet.” were mold or cast fossils for which one or more faces were obstructed.
Appendix 3. Apicobasal Ridge Data
Apicobasal measurements and morphological data for all tooth specimens. All data were drawn from a cross section at 50% of the visible tooth height. Specimens were excluded from the overall average of ridge measurements if fewer than 10 ridges were recorded at the cross section. Specimens labeled “Indet.” were mold or cast fossils for which one or more faces were obstructed. Ridge counts for these specimens are also potential underestimations, as only visible ridges were counted to avoid exaggeration. Specimens with no measurements recorded bore ridges that ended below the cross section.
Open access
