Hostname: page-component-848d4c4894-ndmmz Total loading time: 0 Render date: 2024-04-30T18:24:40.631Z Has data issue: false hasContentIssue false
  • English
  • Français

Application Search in Solution-Driven Biologically Inspired Design

Part of: Design Creativity

Published online by Cambridge University Press:  26 July 2019

Torben Anker Lenau

Abstract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

In solution-driven BID (sol-BID) a challenge is to identify suited applications that will benefit from the solutions principles found in nature. A well-known example of sol-BID is the self-cleaning lotus plant, that has inspired lotus paint and other coating methods. However, sol-BID is often performed by biologists with insight into the biological strategy and organism and typically only little knowledge of technical applications and design methodology. Searching for applications is therefore a challenge to many. Sol-BID has many things in common with technical application search where new applications are sought for a specific production technology or another competence characterizing a company. Experiences from technical application search could therefore form a valuable input for how to perform sol-BID. The paper presents two case studies of application search and proposes a procedure to be used in solution driven BID.

Keywords

Biologically inspired designBio-inspired design / biomimeticsCreativityConceptual design
Type
Article
Information
Proceedings of the Design Society: International Conference on Engineering Design , Volume 1 , Issue 1 , July 2019 , pp. 269 - 278
Creative Commons
Creative Common License - CCCreative Common License - BYCreative Common License - NCCreative Common License - ND
This is an Open Access article, distributed under the terms of the Creative Commons Attribution-NonCommercial-NoDerivatives licence (http://creativecommons.org/licenses/by-nc-nd/4.0/), which permits non-commercial re-use, distribution, and reproduction in any medium, provided the original work is unaltered and is properly cited. The written permission of Cambridge University Press must be obtained for commercial re-use or in order to create a derivative work.
Copyright
© The Author(s) 2019

References

Alting, L. (1978), “A Systematic Theory of Manufacturing”, Environment and Planning B: Planning and Design, Vol. 5 No. 2, pp. 131–156.Google Scholar
Deutsche, M. (2018), Hannover Messe. Available at: https://www.hannovermesse.de.Google Scholar
Dorst, K. and Cross, N. (2001), “Creativity in the design process: co-evolution of problem–solution”, Design Studies, Vol. 22 No. 5, pp. 425–437. http://doi.org/10.1016/S0142-694X(01)00009-6Google Scholar
Helms, M. and Goel, A. K. (2014), “The Four-Box Method: Problem Formulation and Analogy Evaluation in Biologically Inspired Design”, Journal of Mechanical Design, Vol. 136 No. 11, p. 111106. http://doi.org/10.1115/1.4028172Google Scholar
Helms, M., Vattam, S. S. and Goel, A. K. (2009), “Biologically inspired design: process and products”, Design Studies, Vol. 30 No. 5, pp. 606–622. http://doi.org/10.1016/j.destud.2009.04.003Google Scholar
Lenau, T. A., Metze, A.-L. and Hesselberg, T. (2018),“Paradigms for biologically inspired design’, in. Denver, USA: Proc. SPIE, Bioinspiration”, Biomimetics, and Bioreplication Vol. 10593.Google Scholar
Myrup Andreasen, M., Hansen, C. T. and Cash, P. (2015), Conceptual Design - Interpretations, Mindset and Models, Conceptual Design. Springer International Publishing. http://doi.org/10.1007/978-3-319-19839-2_1Google Scholar
NASA (2018), NASA Technology Transfer Portal (T2P). Available at: https://technology.nasa.gov/ (Accessed: 16 December 2018).Google Scholar
Neinhuis, C. and Barthlott, W. (1997), “Characterization and distribution of water-repellent, self- cleaning plant surfaces”, Annals of Botany, Vol. 79 No. 6, pp. 667–677. Available at: <GO to ISI=: http://doi.org/1997XG01500011Google Scholar
Pedersen, T. H. (2009), Værktøj til Facilitering af Fleksibel Formgivning - af Beton. DTU Master Thesis, Kgs, Lyngby.Google Scholar
Pedersen, T. H. and Lenau, T. A. (2010), “Variable geometry casting of concrete elements using pin-type tooling”, Journal of Manufacturing Science and Engineering, 132, p. 061015 1–10. http://doi.org/10.1115/1.4003122Google Scholar
Sto SEA Ptd Lte (2014), “StoColor Lotusan - Intelligent paints with lotus-effect technology”.Google Scholar
Sto SEA Pte Ltd (2018), StoColor Lotusan self-cleaning facade paint. Available at: http://www.sto-sea.com/en/company/innovations/sto-lotusan-/sto-color-lotusan.html (Accessed: 15 December 2018).Google Scholar
Vedel-Smith, N. K. (2009), Tool to Facilitate Versatile Shaping - Sequential Marking of Cast Components. DTU Master Thesis, Kgs, Lyngby.Google Scholar
Vedel-Smith, N. K. and Lenau, T. A. (2012), “Casting traceability with direct part marking using reconfigurable pin-type tooling based on paraffin-graphite actuators”, Journal of Manufacturing Systems, Vol. 31 No. 2, pp. 113–120. http://doi.org/10.1016/j.jmsy.2011.12.001Google Scholar
Ørting, M. C. and Thomsen, C. E. (2018), “Grow technology - a new manufacturing method”. DTU Bachelor thesis, Kgs, Lyngby. Available at: https://findit.dtu.dk/en/catalog/2436261440?single_revert=%2Fen%2Fcatalog%3Fq%3DMads%2BChristoffer%2B%25C3%2598rting%2BChristoffer%2BEgelund%2BThomsen%26show_single%3Doff%26utf8%3D%25E2%259C%2593 (Accessed: 15 December 2018).Google Scholar